Himachal

Active

Works

Civil Works

Restoration of Rain Damages to LWSS Riggar in GP Riggar in Tehsil Balh Distt. Mandi (H.P)

HP Irrigation and Public Health

Baggi | Mandi, Himachal Pradesh

Amount: ₹1.7 LCloses: 12 Oct 20264d left

Timeline

Published1 Oct 2026
Closes12 Oct 2026
Bid Opening13 Oct 2026

Tender Value

₹1.7 L

EMD Value

₹3,400

Closing Date

12 Oct 2026, 5:00 pm4d left

Tender Inviting Organisation

Name

Address

Executive Engineer JS Division Baggi Distt. Mandi H.P.

Work Description

as per BoQ

Tender Information

Tender ID

2026_HPIPH_144756_1

Reference Number

EE-JSD-BGI-TA-Tender/2026- 17864-914 dt. 30/10/2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

90 days

Location

Baggi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

as per NIT

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredALL PAYMENT REGARDING PURCHASE OF BID DOCUMENT AND EMD AS REQUIRED NIT CONDITIO NO. 23(I)(I) (.pdf)

RequiredREGISTRATION WITH JSV IN APPROPRIATE CLASS AND LATEST RENEWAL. (.pdf)

RequiredPAN NO. , GST REGISTRATION AND LATEST ITR (.pdf)

RequiredSCANNED COPY OF UNDERTAKING AS REQUIRED NIT CONDITION NO. 23 (I) (IV) (.pdf)

RequiredAUTHORIZATION LETTER REGARDING DSC OF THE PERSON AUTHORIZED BY THE REGISTERED TENDERER. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹3,400

Important Dates

Last Activity

1 Oct 2026

Published

1 Oct 2026

Bid Opening

13 Oct 2026

Download Starts

1 Oct 2026

Download Ends

12 Oct 2026

Submission Starts

1 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and installation of Submersible pump set of reputed make such as KSB/ Crompton/ OSWAL/ BS Savbav make conforming to latest relevant BIS code and specifications for clear cold water coupled with water filled water lubricated three phase submersible motor suitable for bore well of diameter 125mm to perform the following duty conditions:- DisCharge:- 1.50 LPS , Total Head:- 95 meters	1	Set	-	-
2	Providing and fixing Single phase/Three phase power panel of Havells/ L&T/ C&S/ BS make for above pump set of suitable capacity including starter Amperemeter, voltmeter , over load relay, MCB Capacitor, connection plate, etc for incoming and out going feeders complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	1	No.	-	-
3	Providing and fixing fabricated MS sheet box of size 0.60x0.30x0.90m of 3.15mm thick MS sheet with locking arrangements completly mounted on angle iron four legs of size 40x40x4mm which shall be embedded in cement concrete 1:3:6 for housing electric metre starter switch and other accessories complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	1	No.	-	-
4	Providing and fixing of PVC joint less water proof three core copper cable of Havell/ Finolex make as per IS-694-1964 with upto date ammendmetns and suitable or the above pump set complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	140	Meter	-	-
5	Removal of existing column aassembly (Size - 40x32 mm dia Bottom & top) connecting rods and other fittings from the bore well complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	1	Set	-	-
6	Providing and fixing steel wire rope 6mm thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pump set in bore well including complete arrangement of fastening etc. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	137	Meter	-	-
7	Providing, lowering and jointing in bore PP-R (Polypropylene random copolymer) pipe UV/U-PVC column pipe 40mm dia Hydrostatic pressure 15kg/cm2 and other fitting from the bore well complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	120	Rmt	-	-
8	Providing and fixing MS clamps to hold the pump set in the bore well including required bolt and nuts complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	2	Nos.	-	-
9	Providing and fixing 32mm dia Gun Metal Globe valve with iron hand wheel complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	1	No.	-	-
10	Installation/errection Charges of above items including labour Charges electrical connection, lowering of column assembly (32mm dia) and other fittings etc. as per site requirement complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.	1	Job	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.67 MB

Work Item Documents

TC.pdf

Tender Documents • 0.14 MB

BOQ_215357.xls

BOQ • 2.18 MB

FORM6_3.pdf

Tender Documents • 0.60 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and installation of Submersible pump set of reputed make such as KSB/ Crompton/ OSWAL/ BS Savbav make conforming to latest relevant BIS code and specifications for clear cold water coupled with water filled water lubricated three phase submersible motor suitable for bore well of diameter 125mm to perform the following duty conditions:- DisCharge:- 1.50 LPS , Total Head:- 95 meters

Set

Providing and fixing Single phase/Three phase power panel of Havells/ L&T/ C&S/ BS make for above pump set of suitable capacity including starter Amperemeter, voltmeter , over load relay, MCB Capacitor, connection plate, etc for incoming and out going feeders complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

No.

Providing and fixing fabricated MS sheet box of size 0.60x0.30x0.90m of 3.15mm thick MS sheet with locking arrangements completly mounted on angle iron four legs of size 40x40x4mm which shall be embedded in cement concrete 1:3:6 for housing electric metre starter switch and other accessories complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

No.

Providing and fixing of PVC joint less water proof three core copper cable of Havell/ Finolex make as per IS-694-1964 with upto date ammendmetns and suitable or the above pump set complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

140

Meter

Removal of existing column aassembly (Size - 40x32 mm dia Bottom & top) connecting rods and other fittings from the bore well complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

Set

Providing and fixing steel wire rope 6mm thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pump set in bore well including complete arrangement of fastening etc. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

137

Meter

Providing, lowering and jointing in bore PP-R (Polypropylene random copolymer) pipe UV/U-PVC column pipe 40mm dia Hydrostatic pressure 15kg/cm2 and other fitting from the bore well complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

120

Rmt

Providing and fixing MS clamps to hold the pump set in the bore well including required bolt and nuts complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

Nos.

Providing and fixing 32mm dia Gun Metal Globe valve with iron hand wheel complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

No.

Installation/errection Charges of above items including labour Charges electrical connection, lowering of column assembly (32mm dia) and other fittings etc. as per site requirement complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge.

Job