Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹6.7 L
EMD Value
₹33,655
Closing Date
9 Feb 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, S.D.A.U. AT S.K.NAGAR.
PROVIDING & ERECTING STREET LIGHT IN GIRLS HOSTEL AND BOYS HOSTEL COMPOUND FOR SDAU AT JAGUDAN.
267239
10 of 2025-26
Open
Civil - All
Works
Banaskantha
1 document required · 1 mandatory
₹900
Yes
SDAU FUND A/C, DANTIWADA
₹33,655
Yes
20 Jan 2026
20 Jan 2026
20 Jan 2026
9 Feb 2026
20 Jan 2026
Name of Work:- Providing & Erecting Street Light in Girls Hostel and Boys Hostel Compound for
SDAU At Jagudan
Sr No Description of item Qty Rate Unit Amount
1 Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long 31 4397.00 No
duly painted with two coats of aluminium paint complete with metallic base- plate
of 300 mm x 300 mm x 4mm thick for using as a compound light pole with
approx. weight 47 Kg.
2 Supplying and erecting street light pole bracket comprising main B Class MS pipe 31 721.00 No
of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of
approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top
having sufficient fastners for fixing the brackets and having suitable rise as per site
condition as directed and spread of 2 mtr.with suitable welded stiffener reducer
and with lock nut complete painted with one coat of Red oxide / PU base primer
and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of
following nos of arms.(A) Single Arm bracket 2 Mtr
3 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including 31 801.00 No
excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with
plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with
necessary curing and finishing in approved manner.( for 4 & 6 mtr pole)
4 Supplying & erecting approved make SMC press moulded composite FRP. loop- 31 1204.00 No
in, loop-out approx. 2mm thick box complete with Bakelite connector strip
5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement
having locking arrangements with mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps& earth bolt of following size of
box.(H) 300mm x 200mm x 135mm [deep]
5 Supplying and erecting B class Galvanized iron pipe having smooth finished bore of 70 179.00 Mtr
the pipe on both ends erected nuts and bolts along the pole / wall shaping the
pipe as per site requirement. Pipe dia as following.(A) 25 mm dia
6 Supplying and erecting LED street light / Flood light fittings with High power White 31 3312.00 No
LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt
. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select any wattage capacity between the
ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection.
(i) above 36 to 48 watts Cat-lll
7 Supplying and erecting LED street light / Flood light fittings with High power White 12 6501.00 No
LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more
than 130 lm/w and corrosion free High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass with company mark/name
engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt
. LED driver efficiency > 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select any wattage capacity between the
ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection.(iv) above 90 to
8 Providing & erecting 240 V MCB double pole switch for motor & inductive load 31 297.00 No
(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box
having following capacity (A) 6 to 32 Amp. Cat.III
9 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade 248 46.00 No
ISI marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm
3 core round PVC sheathed
10 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid 1060 139.00 Mtr
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables (C) 4 core 10 Sq. Mm
11 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 792 55.00 Mtr
locating the fault all over the run and back filling the same and making the surface
as normal ground.
12 Drilling the road without breaking the road surface (Asphalt) for laying of cable for 40 610.00 Mtr
feeding power supply by making up to following size of holes at both ends
complete.(B) Up to 150 mm bore dia
13 Supplying & erecting approved make Digital time switch having lithium cell 6 years 2 3137.00 No
operative and operate battery backup 1 channel day clock with 14 memory
programme, suitable to operate on 240V + 5%, 16A with, floating contacts
Minimum switching setup time 1 minimum & LCD display. Also comprised
permanent ON/OFF switching. Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover erected as required with necessary
connection erected as directed.
14 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 31 365.00 No
galvanised iron pipe with coupling and buch buried in specially prepared earth pit
complete with necessary 8 SWG earth wire.
15 Supplying & erecting power contactor ,AC3 duty for time switch complete erected 2 2755.00 No
as per direction Cat III (D) 4 pole 440V 40 Amp
I we am/are agree carried out and complete the above work at………………………………………………% (in
words………………………………….Percentage) below/above rates mentioned schedule- B.
CONTRACTOR SIGNATURE EXECUTIVE ENGINEER
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.(NIT).pdf
ADVERTISEMENT.pdf
B-2 TENDER.pdf
Electrical Specification.pdf
SCHEDULE-B.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .