Construction of Arts building at Degree College, Khairasain, Satpuli

Amount

CEILLING FAN (Make : Bajaj /Compton / Havells) 1200 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj /Compton / Havells) 300 mm sweep 900 rpm

S/F hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG M.S. sheet incorporating 16mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting Alongwith supply of all material, labour T&P required for proper completion of work.

Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects. For 12" dia

Supply and fixing of 300mm Exhaust fan louvers/shutters.

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply and installation of 6 mtr galvanised Octagonal pole with base plate 220x220 12 top 70mm & bottom 130 mm made up of 3mm thik suitable for max wind speed upto 160 km/hr. poles with single bracket

Supply & Installation of New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source as approved by Engineer in charge complete in all respect. (Rate taken from Havells Price List w.e.f. 1st july 2017). Model-RUBY (CLEAR) - IP65 Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

Rectangular table (4 ft x 2ft ) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Officer revolving chair with 5 wheels in mild steel frame and cushion finished in fabric, complete in all respects

Visitor's chairs without wheels and in mild steel frame and cushion finished in fabric, complete in all respects

Mild steel locable cabinets (storwell almirahs) finished in power coating and all accessories, lockers etc.,

Rectangular table (12ft x 4ft) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Locker cabinets in mild steel each locker measuring 2 ft x 3 ft x 1.25 ft.

Rectangular table (6 ft x 3 ft) in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Rectangular side storage cabinet (4 ft x 1.5 ft x 2.5 ft ) in mild steel frame finished with 25 m.m. thick and 15 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

Rectangular notice board (Pin Board) measuring 4'-0" x x4'-0" in particle board framed in teak wood and particle board mounted with appropiate coloured velvet cloth complete with hangers etc.,

Mild steel rack (3ft x 1.5 ft x 6 ft ) with lockable glass doors . (5 shelves per rack in vertical alignment

High stools (2ft 6 in high) in mild steel frame with cushion and fabric finish complete in all respects

Officer revolving chair with 5 wheels in mild steel frame and cushion finished in fabric, complete in all respects

Set of three seats in perforated powder coated galvanised steel sheet and in mild steel frame measuring 6-0" x 2-3" x 2-6" complete in all respects

Reading desk for journals and newspaper

Students chair with arm rest and mild steel fram (withourt wheels) with writing pad suppor flexible hinge arangements complete in all respests.

Teachers diad 4'6" high with laptop stand arrangemet and llocable drawres at botton in mild steel frame finished with 25 m.m. thick prelaminated (both sides) M.D.F. board and with edge bending in matching PVC beading, postformed as per the requirements, complete in all respects with all hardware etc.,

White board with duster measuring 8'-0" x 4'-0" in ,ild steel and powder coated in white colour.

Lift 04 passenger

Bidder Name

Amount

M/S Sharma construction

Ratan Construction

M/S Kumar Construction

M/S SINGH ASSOCIATES

M/s Matbar Singh Negi

M/S Kumar Construction

M/S SINGH ASSOCIATES

M/S Sharma construction

Ratan Construction

M/S Kumar Construction

M/S SINGH ASSOCIATES

M/S Sharma construction

Ratan Construction