Internal Electrification work of Digital Library in Govt.Girls Inter College at Haldwani , Nanital

Amount

Wiring for light point /fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch,modular plate,suitable G.I.box and earthing the point with 1.5sq.mm.FRLS PVC insulated copper conductor single core cable etc.as required,complete in all respect.Group C

S/F of modular type 5/6 amps switch on the existing switch board,complete in all respect.

Same as above but for 3 pin 5/6 amps socket ,complete in all respect.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch,connections etc. as required. (For light plugs to be used in non residential buildings

Same as above but for 2x2.5sq.mm+1x2.5sq.mm earth wire.

Same as above but for 2x4.0sq.mm+1x4.0sq.mm earth wire.

Same as above but for 2x6.0 sq.mm+1x6.0 sq.mm earth wire.

Same as above but for 4 X 10 sq. mm + 2 X 6 sq. mm earth wiresq.mm earth wire.

S/D of 20mm dia medium class PVC conduit along with accessories in surface/recess, complete in all respect.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.2 run of cable

S/D of 1x1.5sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recess PVC conduit.Complete in all respect.

S/F of suitable size GI box with modular plate & cover in front and 6 pin 5/6 & 15/16 amps modular switch and socket on surface or in recess,complete in all respect.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A Each

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..Single pole

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S/F of 20 amp,240 volts SPN industrial type socket outlet with 2 pole & earth metal enclosed plug top alongwith 20amps "C"series SP MCB in sheet steel enclosure,complete in all respect.

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts.50 sq. mm 3-1/2 core,Complete in all respect.

S/F of recess/surface/pendent mounting round 10 to 15 watt LED downlighter ,complete in all respect. Catt.AA A

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MS sheet,complete in all respect.

S/F of LED tube light fitting with batten for 1x22 watt.LED tube light ,complete in all respect. Catt.AA

Making hole in the wall for exhaust fan and finishing properly,complete in all respect.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work

S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.

Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. CAT-AAA

S/F of 15 watt LED BULB ,complete in all respect.

S/F of exhaust fan Bajaj 300 mm,complete in all respect.

Aulten utomatic line voltage correctors input voltage range single phase 90v -300 v

Daikin cooling only 2 ton 3 star inver AC variable speed wall mount split AC

Supply, Installation and Commissioning morbus plastic polycarbonate (PC) PLUG IN PROTECTION GUARD FOR rj45 PORT

M/S GANGOLA ELECTRICALS (BID ID -369130)

OLI ENTERPRISES (BID ID -369117)

JOSHI ELECTRIC WORKS (BID ID -369661)