NIT No- 1336/PHE(C)/BMC , Dated- 05/02/2026

Withdrawing of damaged C.I. pipe in Tyton of lead joints after excavation of the trenches up to existing the pipe below ground level through any kinds of soil Moran etc.of cutting mottled road surface or any kind of surface including opening out the different leakage joint adjacent to brust pipe including cutting of pipes if necessary and relaying of C.I. new pipe in proper level and line and line fitting, fixing and placing in positing and jointing with lead and spun as lead spun yard for which no extra excavated materials consolidating the same by complete as per direction of E.I.C. (a) 300 mm dia.

(b) 250 mm dia.

(c) 200mm dia

(d) 150mm dia

(e) 100mm dia

Jointing of C.I. pipe to required to the made with lead and spun yard, yard instead of rubber gasket extra payment for each lead joint will be made at the rate mention below. (a) 300 mm dia.

(b) 250 mm dia.

(c) 200mm dia

(d) 150mm dia

(e) 100mm dia

Making C.I.D.F pipe jointing including specials of all dia including cost of supplying labours, nuts and washer rubber gasket and chemical rubber solution etc. complete as per direction of E.I.C. (a) 300 mm dia.

(b) 250 mm dia.

(c) 200mm dia

(d) 150mm dia

(e) 100mm dia

Labour charges of taking out C.I.D.F pipe with specials including costs of cutting bolts if necessary as per direction of E.I.C. 100mm to 300mm dia.

Labour charges for laying C.I.D.F pipe (with specials) up to 300mm dia including cost of carriage from stockyard in proper alignment either over ground of underground as per direction of E.I.C. 100mm to 300mm dia.

Taking out the disturbed C.I. pipe from the trenches by cutting the socket and of the pipe carefully of without damaging the spigot end and including cleaning the silt and slush by bucket open out the pipe and also including hire charges of pump and dewatering the trenches if necessary including all accessories charges etc. complete as per direction of E.I.C. 100mm dia to 300mm dia.

Laying and jointing C.I. pipes and specials to required level alignment as per specification drawing and direction of E.I.C. complete with necessary specials that bends, C.I. caps, plugs etc. complete as per direction of E.I.C. 100mm to 300mm dia.

Searching the sluice valve of different dia cleaning the same for debris and excess spoils earth any other foreign materials from the footpath spreading the excess spoils to any place as direction by the E.I.C.

Dismantling sluice valve by part and cutting out worn out bolts and re-assembling the same after reginding valve, re-washing flanges by asbertor dimond packing including studsbolt, nuts and necessary repairs as per direction of E.I.C. (a) 100mm dia

(b) 150mm dia

(c) 200 mm dia

(d) 300 mm dia.

Water pressure testing of different dia water including excavation of earth, drilling, tapping of pipe line, fitting fixing pressure guage with pipe etc. complete.

Replacing the damaged sluice valve including opening out the damaged parts and replacing the same by excavation the trench dismantling the sluice valve chamber re-fixing the new sluice valve with serviceable old nut bolts, washer including supply of new rubber gaskets nuts bolts washer as necessary including bailing out water etc. complete as per direction of E.I.C. 100mm to 300mm dia.

Hire charges of pump with all accessories and P.O.L including all charges and carriage of pumps 5H.P.

Supplying fitting and fixing M.S. plate 25mm thick including gas cutting and other necessary arrangement etc. Complete (a) 250mm dia to 300mm dia

(b) 150mm dia to 200mm dia

Renewing specials only of cast iron spun pipe conforming to I.S. 1536/1976 including cutting trenches in any soil or through masonry, concrete etc. if necessary and mending good damages including jointing with Tyton joints as per manufacturer’s specification excluding the cost of concrete or masonry work, if required but including the cost of filling up trenches (for all specials, payment will be made on the basis of actual weight of the specials).

Construction of masonry valve Chamber as per Departmental drawing with bricks work in Cement mortar(6:1) including earth work in excavation and back filling, Single brick flat soiling cement concrete (1:4:8) with Jhama Khoa in foundation slab with R.C.C. (1:2:4) including shuttering in bottam and sides reinforcement work as per department drawing complete with supply of 150mm X 150mm C.I. surface box embedded into slab including over hauling the valve (if necessary) all complete including cost of all labours and materials. (a) 100 mm dia to 300 mm dia.

Washout the pipe line in different location by operating sluice valve as per direction of E.I.C. by daily labour etc.

Earth work in filling in foundation trenches of plinth with good earth in layer of exceeding 15cm. including watering and ramming etc. layer complete. With earth obtained from excavation of foundation.

Supplying , fitting and fixing Brass Ferrule including connection with G.I. Pipes of TATA makes of following dia. And upto 450 mm long with screw , jamnut, socket etc. complete in all respect including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer-in-Charge. a) 25mm dia.

b) 20mm dia.

c) 15mm dia.