REPAIRS TO SANITARY PLUMBING FITTINGS CLEANING OF OH TANKS IN CERTAIN MARRIED OTM ACCN UNDER GE I NAVY JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of debris to a distance not exceeding 500 mts and depositing where directed.

Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), stacking ser-viceable tiles at site and removal of debris to a distance not exceeding 500 mts and depositing where directed.

Demolition and breaking up drain pipes any type, any dia, any location complete all as directed

Cutting chases in brick/ stone wall, pinning in, making good to facing where required and pointing in CM 1:3 to ends of edges of landing, steps, cills, lintels etc and cutting chases not exceeding 10 cm girth for concealed water tubing and making good cutting as per its original specfication complete all as directed.

S&F fibre glass reinforced plastic (FRP) door frames of three legged of cross section 90x45 mm having single rebate 32x15 mm to receive shutter of 30 mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate of 2 mm thick and filled with suitable wooden block in all three legs. The frame shall be covered with fibre glass from all sides. Mild steel stay shall be provided at the bottom to steady the frame.

S&F 30 mm thick fibre glass reinforced plastic (FRP) paneled door shutter made with fire retardant grade unsaturated polyester resin moulded to 3 mm thick FRP laminated for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5 mm thick FRP laminated for panels.

S&F 200 mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 100 mm size butt hinges, medium weight ,stainless steel and fixed .

S&F 125 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

S&F in repairs 20 mm dia tubular towel ring brass chromium plated, including CP brass screws complete.

S&F in repairs XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

M&L 18-20 mm thick granite slab (of any quality) work (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (

M & L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M&L glazed ceramic coloured tiles of size 600x300x7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item No 14 to 16 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

Grinding and mirror polishing of existing terrazo tiles to complete satisfaction of Engineer-in-Charge all as directed.

M&L for rendering 15 mm thick in CM 1:6 on stone or block masonry surface or other than fair faces brick work, finished fair and even without using extra cement complete all as specified.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 0.50 mm thick white cement based wall care putty complete all as specified.

M&L complete removal of existing treatment rubbing, scrapping by hand held sander / long handle sander and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 0.50mm thick cement based wall care putty complete all as specified.

M&L Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed.

M&L preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed.

M&L One coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

All same as per item No 23 here-in-above but on steel suface

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.5 sqm in each pane complete all as directed.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty/ wooden beard in squares not exceeding 0.5 sqm in each pan complete all as directed.

Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance not exceeding 500 mtr and depositing where directed.

Taking down 15 mm bore of pipe old GI tubing and connection including cleaning for re fixing stacking at site where directed.

Taking down 20 mm bore of pipe old GI tubing and connection including cleaning for re fixing stacking at site where directed.

M&L for 15 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.

M&L for 20 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.

S&F in repairs 20 mm ball brass valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed.

S&F 50 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors complete all as directed.

S&F 75 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors complete all as directed.

S&F in repairs PVC waste pipe for 32mm dia waste coupling complete. Make: Prayag or equivalent in approved make.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches/ fixed to wall complete all as directed.

S & F 75 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S & F 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S&F 110 mm bore PVC (SWR) vent cowl

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal

S&F 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as directed.

S&F in repairs 15 mm bore bib taps long nose with wall flange, fancy type, cast copper alloy, chromium plated, long shank screwed for iron pipe or for brass ferrule complete all as directed..

S&F 15 mm bore 2-way bib cock with wall flange and aerator, brass chromium plated with fancy type and CP hand health faucet of brass body with wall hook and 1 mtr SS braided rubber hose pipe complete.

S&F in repairs 15 mm bore pillar taps, fancy type, CP cast copper alloy, with capstan heads, with long screwed shanks and fly-nuts, screwed down high pressure, with or without lettered 'Hot' or 'Cold' screwed for iron pipe complete all as directed.

S&F in repairs brass chromium plated overhead shower rose 125 mm dia with swivel joints fixing to steel pipes etc complete all as directed.

S&F in repairs stop valve, 15mm bore of pipe, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or lever handle, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repairs angle stop valve, 15mm bore of pipe, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or lever handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repairs of CP central hole WHB mixer for hot and cold water mixing and 15mm dia screwed down for iron pipe complete all as directed.

S&F in repairs brass chromium plated wall mixer (3 in 1), two for hot and cold water mixing and one for shower rose of 15 mm bore screwed down for iron pipe complete all as specified.

S&F in repairs PVC connections 15 mm dia, 600 mm long, with PTMT nuts & washers at both ends.

M&L grating round 140 mm size of PTMT. (Minimum weight 50 gms).

S&F in repairs 550 mm x 400 mm size white flat back, vitreous china wash hand basin including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as directed.

S & F in repairs Vitreous china squatting pan "Orissa pattern" long pan of size 580 x 440 mm white with integral foot rest but (excluding flushing cistern and flush pipe ) including connection etc including setting the trap and pan in lime concrete ( 1 lime 2 sand or surki as ordered and 5 aggregrate ) , min. 150 mm thick alround and finished just below level of rim of pan to floor finish complete all as directed.

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern) white complete including plastic water closet seat cover (Black) closed pattern with flat bottom and cover and mild steel chromium plate or aluminium hinging device and 32mm dia PVC flush pipe high or low density suitable for low / high level cistern connected from flush out let to WC flushing in let. (Flushing cistern high / low measured and paid seperately).

S & F in repairs vitreous China Urinal, Half stall type, white (excluding flushing istern, flush pipe and waste pipe) complete all as directed.

S&F new sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed.

S&F in repairs corrosion resistant Stainless Steel kitchen plate rack of size 31x30x10 inch, with 1 mm thick Stainless Steel sheet (min weight 7.00 kg) fixed to walls with nails complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 1000 litres capacity rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) colour white both inside and outside with top cover including PVC float valve high pressure suitable for 25 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Cleaning and removing all scale and dirt, etc, from tanks fixed in any description of capacity exeeding 250 ltrs and not exceeding 500 ltrs and from mouths of circulating pipes, etc.to complete satisfaction of Engineer-in-Charge complete.

All same per item No 64 here-in-above but tanks exceeding 500 ltrs but not exceeding 1000 ltrs -do-

badri glass and construction

SIBS CONTRACTOR

jagdish machinery stores

Raj brothers

M/s Balaji Enterprise

Jyoti Refrigeration