CA NO CWE BLY/GE (E)/69 OF 2020-21 SPECIAL REPAIR TO BLDG NO T-77 T-03 (RATION STORE) T-110 (OR LIVING) T-104 AND T-101(JCOs LIVING) UNDER GE (EAST) BAREILLY

Amount

Dismantling framed truss n.exc 10 meter complete all as specified and directed.

Dismantling timber in scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed.

Demolition of cement concrete (un-reinforced) and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition/dismantling of RCC as in beam , chajja , shelve and similar suspended work complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, pillars, etc,complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.50 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.50 sqm each complete all as specified and directed.

Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Dismantling water tanks 500 ltr & n exc 1000 ltr complete all as specified and directed.

M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 0.80 mm plain galvanised Mild steel sheeting in ridge, hips, valley gutter,drip and straight flashing fixed with L type or J type or cranked hooks bolts complete all as specified and directed.

M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, build in cement mortar 1:6 complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, wall band,shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels & wall band over 1.5m span etc complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in chajja, beams etc complete all as specified and directed.

M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item 25 above item but 6mm to 8mm dia bars

S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F Glass/gauge shall be measured and paid for separately)

S & F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring. Fixed in floor.

S & F 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm long butt hinges medium weight stainless steel colled rolled complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F 300 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified. (Note :- Glass shall be measured and paid for separately).

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified. (Note :- Glass shall be measured and paid for separately).

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

M&L for 3mm thick sheet glass frosted on one side and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) including aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long ,brass mortise lock 100mm 4 leaver, aluminium stopper, cleat, double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to other than fair faces of brick wall surfaces finished surfaces fair & even without using extra cement for fixing tiles etc complete all as specified and directed

M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L 7 to 8 mm mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified glazed ceramic coloured / double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as spd

M&L for vitrified glazed ceramic coloured / double charged / ultra charged tiles 10 mm thick square/ rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surfaces such as skirting or dado set & jointed in pointed in matching colour 5 mm thick epoxy filling in between tiling complete all as specified and directed.

M&L for 20 to 22 mm thick machine cut mirror polished kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing complete all as specified and directed.

M&L for 20 to 22 mm thick machine cut mirror polishing kota stone slab as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) with and including 10mm thick rendering in CM 1:4 finished even and rough complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repairs fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in repairs fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.

S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified &directed.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair vitreous China coloured European type WC with "P" or "S" trap white including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etcplastic water seat white/black pattern flat bottom and cover and mild stel chroumium plated. complete all as specified.

S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S & F 15 mm dia CP health faucet with 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.

S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.

S&F 500 litres, rotational moulded polyethylene white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system), hoisted and fixed in position complete all as specified and directed .

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by.

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type curtain rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed. .

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately)

Supply only liquid water proofing complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat over 1mm thick cement based wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying three coats of white wash on brick or concrete surface complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment on walls etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over 1.5 mm thick cement based in double layer wall care putty complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10 cm width or girth , not other description applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed.

M & L for Post Construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed.

M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.

E/M Part:- Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down sub main wiring including earth wire/ service connection complete all as specified and directed.

Taking down and disconnecting ceiling/exhaust fan including removing to MES store complete all as specified and directed.

Taking down existing unserviceable main switch/ cut out/ DBs of any type & capacity including making good distrubed surfaces to match with the existing surfaces of walls complete all as specified and directed.

M&L for point wiring in concealed PVC conduit using 1.5 Sq mm single core, PVC insulated, unsheathed copper conductor cable 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS, duly painted with red oxide metal primer including fixing/ grouting sunken/ surface as per site requirement covered with 3 mm thick plastic laminated sheet including running up of 1.5 sq mm copper conductor, PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one light/fan/Exhaust fan/bell point complete all as specified and directed.

All as per item No. 100 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item No. 100 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

All as per item 100 above here in before but for one 5 pin socket outlet 15 Amp on independent board with 2.5 sqmm FRLS (nominal area) cable PVC insulated but unsheathed copper conductor single core multistranded 1100 V grade including running of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and directed.

S&F switch piano flush type polycarbonate 5 A single pole one way complete all as specified and directed.

S&F switch socket combination polycarbonate 2 in 1, 3 pin 5 Amps multipurpose flush type complete all as specified and directed.

S&F switch socket combination polycarbonate 2 in 1, 3 pin 15 Amps multipurpose flush type complete all as specified and directed.

S&F of ceiling rose surface bakelite 65 x 50 mm 3 terminals AC 50 Hz 230 volts complete all as specified and directed.

S&F lamp Holder, PVC/polycarbonate type with back plate for batten fittimg complete all as specified and directed.

S&F LED retrofit lamp B-22 holder base with polycarbonate diffuser 9 watt, 230 volt complete all as specified and directed.

S&F ultra slim LED MS batten light fitting 1 x 20 Watt, powder coated decoratyed end cap complete with retrofit polycarbonate glass tube LED 20W, 4' long including suitable electric connection with three core flexible PVC in sulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to batten complete all as specified and directed.

S&F LED Bulk head light fitting IP 55 with Engineering plastic housing & clear prismatic diffuser with lamp of 1x 10 watt LED, with three core flexible PVC insulated copper conductor (multistranded) cable of size 23/.0193 from ceiling rose to fitting complete all as specified and directed.

Hanging only ceiling fan of any sweepafter carrying out complete servicing such as greasing, oiling, replacing rubber reel, split pin check nuts, PVC connecter, rewinding if required including two coats of spray painting over a coat of red oxide primer after rubbing entire body & blades and also re-write MES fan number with black paint and suitable electric connection with three core flexible PVC in sulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to fan complete all as specified and directed.

S&F stepped type electronic fan regulator flush mounting type, 180Watt, 230Volt complete all as specified and directed.

S&F in replacement of LED security light fitting of 1x 25 watt IP 65 including connecting up with and provision of 1.5 sqmm 3 core 1100 volts grade copper conductor(multistranded) cable from light fitting to junction box and bracket made out of GI tubing medium grade 32mm dia 1.2meter long bend to shape required fitted to wall/pole with 2 Nos mild steel clamps made out of MS flat 40x 5 mm with MS nut bolt and washer complete all as specified and directed.

M&L for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in PVC conduit all as directed.Note : 2 run of wire + 1 run of earth wire + 1 run of PVC conduit will be measured as one unit

S&F sheet metal enclousers DBs when MCBs to be used 4way, 415Volt, double door SPN with 200 Amps rated bus bar complete all as specified and directed.

S&F sheet metal enclousers DBs when MCBs to be used 8way, 415Volt, double door SPN with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB single pole & neutral of size 16 to 40 Amp 230 Volt, 10 KA B curve type complete all as specified and directed.

S&F MCB single pole of size 6 to 16 Amp 230 Volt, B curve type complete all as specified and directed.

Taking down service connectionsand taking up UG cables complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover over under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed.

M & L for river washed and screened sand for filling in trench below and around the under ground cable for cushoining of cable complete all as specified and directed.

Bore holes under road or cutting the road /pavement /hard standing or any other situation by mannual or other means for inserting 25mm bore GI pipe for crossing the cable and making good both the end complete all as specified and directed.

S&F of galvanized iron pipe of 25 mm bore Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 2 core complete all as specified and directed.

Supply, lay jointing testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm 2 core complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 5 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary earth work complete as specified or indicated including testng on completion complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 1,28,515.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S Harshri Nath Enterprises

UTTRAKHAND BUILDERS

M/S R S Constructions

Vasundhra Enterprises

Builders Harpal

M/S Quality Constructions

NETRAPAL SINGH

M/S ABHISHEK ENTERPRISES

M/S VIRAT CONSTRUCTION

RIYASAT ALI KHAN