COMPREHENSIVE MAINTANANCE TO OTM AND MD ACCN AT 147 LT AD REGT, 915 WKSP, SIG REGT AND 55 SUP DEPOT, SARVATRA NAGAR AND NEPAL LINE UNDER AGE B/R (WEST) AT GE DEHU ROAD

Amount

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets , refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.)

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. (Note : Replacement of fittings and fixture like Bib tap, Piller Tap etc. if required shall be measured and paid separately.)

Petty repairs to Aluminium joinery works such as Aluminium Door, Alumnium Windows, Aluminium Ventilators and like similar works such as easing of doors, refixing of door, windows, refixing builder hardware such as Aluminium beading to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately.) NOTE : For item No. 1 To 3, Contractor shall ensure timely deployment of skilled labour and execute the work with proper workmanship as per satisfaction of the Engineer-in-Charge. Contractor shall depute a dedicated supervisor who will report to the AGE B/R office on a daily basis (working days) to collect complaints and coordinate timely rectification through his labour team. The supervisor must maintain a daily complaint log and update the status of rectification to the satisfaction of the Engineer-in-Charge.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceiling in patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. Make : Asian, Nerolac and Berger

M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper on new plastered surfaces of walls including 1 mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge. Make : Asian, Nerolac and Berger

M & L for preparation for old decorated surface of wall including brooming , down , scrapping down smoke spot and stopping nails mark by filling putty and applying one coat of cement based Paint complete all as specified and directed. Make : Asian Paints , Snowcem and Nitco Note : Putty shall be measured and paid separatly

All as per item No. 13 above but two coat of cement based paint. Make : Asian Paints , Snowcem and Nitco

M & L for preparation of old decorated surface of wall including brooming down , scrapping down smoke spot and stopping nails mark by filling Putty and applying two coats of oil lustre paint including 1mm thick wall putty ( where required ) on plastered wall surface incl preparation of surfaces and priming wth chalk whiting paint complete all as specified and directed by Engineer -in-Charge. Make : Asian Paints , Nerolac and Berger . Note : Putty shall be measured and paid sperataly

All as per item No. 15 above but One coat of oil emulsion paint. Make : Asian, Nerolac and Berger

M&L 1 mm thick wall care putty on wall /ceiling complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. Make : Somany, Asian and Kagaria

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to over & including 10mm thick screed bed in 15mm thick Screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed. Make : Somany, Asian and Kagaria

All as per item No. 24 above but on skirting over 8 to 10 mm thick in CM 1:4 complete all as specified. Make : Somany, Asian and Kagaria

M&L for Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceed 0.30 sqm, but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. Make : Somany, Asian and Kagaria

All as per item No 26 above but for for skirting over 10mm thk rendering in CM 1:4 complete all as specified and as directed. Make : Somany, Asian and Kagaria

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed. Make : Somany, Asian and Kagaria

Taking down chowkhats or frame with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc 4Sqm each complete all as specified and as directed

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed

Taking down re-fixing Shutters of any description but exc 1 sq. m and n exc 2 sq. m each in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates.

Dismantling structural steel work including doors, gates, grills but excluding framed truss etc complete.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 (Gde-E-165)

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 165 X 60mm

M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.

S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

Supply and fixing three track sliding window including frame with two shutters with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item). Make : Jindal

S & F Aluminium powder coted decogrill 7.5mm width and 6mm thk of design DG 102 having weight 3.131kg/Sqm fixed to and including powder coated aluminium U type frame with CP brass/SS screws @ 200 c/c, including cutting the grill to proper opening size for fixing and operation of handle and fixing powder coated aluminium section around the opening all as per requirement and direction of Engr-in-Charge

S&F 100 mm Butt hinges, stainless steel with mild steel hinge pin, bright polished and fixed, typeB-11

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 100mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

Supply only 150mm long Aluminium handles cast type anodised

S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. Make : Dyna and equivalent ISI marked

S&F 150 mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and directed.

S & F radiant door bottom sealing strip guard for doors complete all as all as specified and directed.

S&F in repairs 25 mm dia Stianless steel curtain rod with side knobs and fancy type brackets of stainless steel of 25mm dia in pair of required size all as specified and directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel shutters all as directed.

S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S& F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs)

Welding exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F floor door stopper, with 150 mm long of brass body and tounge with hard drawn steel spring in floor complete.

M&L for preparation of new wooden surfaces and applying applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

M&L preparation of old painted wooden surfaces of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.

Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

Supplying and laying of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealed or open of any length complete all as specified

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealed or open of any length complete all as specified

S & F of 16mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F of 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete.

M & L for 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and as directed.

M & L for 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.

Dismantling water tanks and removing to store of capacity exc. 500 litres & n.exc 1000 litres.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.

S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.

S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm dia bore pillar taps ,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

supply only 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. Make: Prayag & equivalent. Make : Prayag, Neta and GEM

supply only PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

supply only 32 mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia. Make : Prayag, Jaguar and ESS ESS

S&F in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed. Make : Prayag, Jaguar and ESS ESS

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

S&F in repair soap dish (Any Type) fixed to wall with brass chromium plated screws complete all as specified and directed.

S&F in repairs chromium plated toilet paper holder.

S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repair vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and as directed. Make : Cera, Prayag and Parryware

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed. Make : Cera, Prayag and Parryware

S & F as in repair Plastic water closet seat cover ,closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia

S & F in repair 100mm dia steel chromium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:4 complete all as specified and directed.

S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

S&F in repair stainless steel kitchen rack made of .63 mm thick stainless steel sheet of size 750 mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed.

S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in Sunkun portion exe15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed.

Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed.

Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed.

M&L PCC 1:4:8 Type D2 40 mm aggregate as in foundations, filling and mass concrete

M & L for 100mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. Make : Ultra Tiles and Topaz

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade all as specified. Make : Ultra Tiles and Topaz

M&L 30 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L PCC (20 mm graded aggregate)1:3:6 Type C1 Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges

M&L in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F for ready made pully operated cloths drying system incl of four aluminium pipes 1.8m long each (04 pipe set) outer dia 22mm and inner dia 19.8mm channel assembly, locking system ropes and all fixing materials complete all as specified and as directed Note : Easy Dry or equivalent make as spproved by CE Suthern Command Pune

M/S RENUKA CONSTRUCTIONS (BID ID -3325316)

Shri Sant Cosntruction (BID ID -3325388)