Supply, Installation, Testing and Commissioning of Air Ventilation Fan for HVAC Plant at AIIMS, Jodhpur.

Amount

Providing and fixing wall mounted axial flow fan of following specifications on existing wall, Fan – 965(±10%) mm dia. Impeller – metallic with paint. Motor – 3-Phase, 7.5(±10%)kW, 5 HP, 1450(±10%) RPM, 50Hz±10% with insulation. Note: - 1. Painting specifications: - painted with 2 coats primer & 1 coat of synthetic Enamel finish paint of color D.A. Gray, Total paint thickness DFT 50-60 Micron. 2. Able to work in maximum ambient temperature up to 50’C. 3. Low Noise and Vibration Limit with MS Casing, synthetic enamel paint, making and finishing wall opening and etc. as required. a) 25000 (±15%) CFM Make: Kruger/ Marathon/ Almonard/ Equivalent ISI make

Providing and fixing wall mounted axial flow fan of following specifications on existing wall, Fan – 965(±10%)mm dia. Impeller – metallic with paint. Motor – 3-Phase, 1.1(±10%)kW, 2850(±10%) RPM, 50Hz±10% with insulation. Note: - 1. Painting specifications: - painted with 2 coats primer & 1 coat of synthetic Enamel finish paint of color D.A. Gray, Total paint thickness DFT 50-60 Micron. 2. Able to work in maximum ambient temperature up to 50’C. 3. Low Noise and Vibration Limit with MS Casing, synthetic enamel paint, making and finishing wall opening and etc. as required. a) 3500 (±10%) CFM Make: Kruger/ Marathon/ Almonard/ Equivalent ISI make.

Providing and Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1kV Grade with Copper conductor of IS: 1554 P-1/IS:7098 P-1 of size 4 core X 6 sq. mm on existing cable tray/ wall and etc. as required. Make: Havells/ Polycab/ Finolex/ RR Kabel

Supply and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty copper lugs duly crimped with crimping tool, PVC tape etc. Nos. 02 for 4 core X 6 sqmm copper PVC insulated & PVC sheathed / XLPE of 1.1kV grade and etc. as required. Make: Metalcraft/ Cabend/ Trinitytouch

SITC of Wall mounting cubical type Starter panel made out of 1.6 mm thick sheet steel powder coated enclosure designed as per Switchgear OEM type -2 coordination chart and suitable for operation of 30000 cfm range Air Washer's Blower motor, pump comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps, MCB etc. Make: L&T/ Siemens/ ABB

NIRMAN ELECTRIC STORE