PROVN OF SINGLE LIVING OFFRS ACCN AND PROVN OF FALSE CEILING IN BLDG NO T-502 AND 503 OF 503 AD MSL REGT (MRSAM) AT MISA CAMP UNDER GE (S) TEZPUR

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out.

M&L Hard core of gauge n exc 63 mm of broken boulder bellow plinth protection/hard standing/floor.complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete.complete all as specified and directed.

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column, post etc complete all as specified and directed

M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Lintel/chajja etc complete all as specified and directed

M&L for RCC M-25(Design Mix) (20mm gradded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Use & waste of form work of the side of the concrete foundation, footing, base of column rough finished flat surface.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping).

Use & waste of form work to the side of the column , rough finished flat surface area.

Use & waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc.

Use & waste of formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening , the formwork soffit only shall be paid for under item 7010 of SSR Part-II

S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia.complete all as specified and directed.

All as per item No 15 but 5 mm dia and over upto including 10 m dia in stirrups, spacers and binder etc.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6) complete all as specified and directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) finish even and smooth without using extra cement.complete all as specified and directed

M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) finish even and smooth without using extra cement.

M&L for sand filling under floor or in foundation or in trenches incl watering as reqd.complete all as specified and directed.

M&L for 75 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 complete all as specified and directed.

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc.

Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.

M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only).

Supply only integral water proofing compound.

M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor.

M&L 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall.

M & L for Virified Ceramic tiles dark shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

S&F for colour Glazed ceramic tiles 450x350mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L PCC 1:3:6 type C-2 75 mm thick as in plinth protection even and smooth without using extra cement.

M&L for Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A

M&L for preparation of new plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

M&L for preparation of new plastered surface of ceiling and applying two coats of distemper oil emulsion over plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed

M&L for preparation of new plastered surface of wall Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

S&F MS Hold fast confirming to Fe-290 Gde E-165.complete all as specified and directed.

M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc.complete all as specified and directed.

S & F for mild steel framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders, framed balusters, walk ways railings, framework of water tanks and similar work confirming to Fe 410 -0 or Fe 310-0 complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified

S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame complete.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

Preparation of new steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for galvanised mild steel wire cloth of 0.56mm dia and average aperture of 1.18mm and fixed in position.complete all as specified and directed.

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 2nd class hard wood shutter 35mm thick plain framed, panalled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated.complete all as specified and directed.

S&F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).complete all as specified and directed.

S & F Factory made solid panel pvc door shutter with chowkhats 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.complete all as specified and directed.

S&F 300 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position complete all as specified and directed.

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position.complete all as specified and directed.

M&L for extruded aluminium alloy handle fabricated type of 150 mm long

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed.

M&L for preparing new wood based Surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enameled painting over a coat of pink primer complete as specified and directed

Preparation of concrete roof surfaces applying roof treatment as under:- (a) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE) (c) Laying of APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE)

M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately)

S&F for MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

S & F vitreous china white wash hand basin flat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valve high pressure with polythene float & flynut screwed for iron pipe and fixed of size 20mm bore complete all as directed at site.

S & F for 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F for 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S & F Vitreous China wash down water closet pan (pedestal pattern), white connection to trap, and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (Excluding fixing bolts, flushing cistern and flush pipe) complete

S & F 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets , long bend including flush pipe of PVC 32mm dia and connection to pipes etc complete all as specified and directed .

S & F Towel Rail 600mm long of chromium plated brass metal fixed with and including Chromium plated brass screws and wooden/plastic cleats.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.

S &F brass CP shower rose swivel type fix to iron pipe all as directed.

S & F 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed .

S & F health faucet with 1.00 mtr tube and hook complete all as specified and directed. Make-Prayag Cat no BEA -81

S & F of central hole basin mixer, with round spout with pop up waste system with 450mm long copper pipes & brass nuts ( Make :Jaquar continental series cat No169

S&F in repair wall mixer , 3 in -1 system with provision for both telephone shower and over head shower, chromium plated, fancy type, 15 mm bore complete all as specified and directed

S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S&F 40mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S & F for 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

M&L for supply, laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge. (Note:- Excavation/earth work and concrete bed shall be measured and paid for separately)

M&L plain cement Concrete 1:3:6 type C2(Using 40mm graded agg) for concrete bed to drain pipes of 150mm bore, under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed by Engineer-in-Charge

S& F 75 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed

S& F 110 mm dia PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed

S& F 75 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed

S& F 110 mm dia PVC (SWR) bends any radius fixed in any position, complete all as specified and directed

S &F chequered cement concrete coloured tiles (glossy finish) 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

M&L for Anodised aluminium snap grid (605 x 605mm) frame work for false ceiling all as specified directed

S&F 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as directed.

M&L two coats of oil bound distemper on ceiling including preparation of surfaces by complete all as directed.

M & L for point wiring with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal box fixed with brass screws complete for housing the switches, socket outlets, fan regulators etc. for the following (Rate deemed to be inclusive of cutting chases and making good disturbed surface). (a) one light/fan point/call bell controlled by one, one way switch.

All as per Item No 88 but one socket outlet 5 pin 6 amps on independent board.

All as per Item No 88 but one 5 amps socket outlet on same board with other switch.

M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal box fixed with brass screws complete for one socket outlet 6 pin 15/16 amps on independent board (Rate deemed to be inclusive of cutting chases and making good disturbed surface).

Supply and fix Modular switch one way 10 Amp.

Supply and fix modular bell push 10 Amp.

Supply and fix Ding Dong bell, AC, 230 volts, single pole.

Supply and fix modular socket outlet 2 in 1, 3 pin 10 A.

Supply and fix modular socket outlet 2 in 1, 3 pin 20 Amps

Supply and fix Modular switch one way 20 Amp.

Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals.

Supply and fix modular type electronic fan regulator.

Supply and fixing modular white cover plate with frame 1 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. Make: Havells/Anchor or equivalent make as approved by GE.

Supply and fixing modular metal flush box 1 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 2 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 4 modules complete all as specified and as directed.

Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.

Supply and fixing LED fitting 20 watts high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells cat No. ENDURALINEARNEOBS20WLED865SPCWH.

Supply and fixing LED fitting 10 watts high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells, Model No. ENDURALINERNEOBS10WLED865SPCWH

Supply & fix decorative wall mounted die cast Al LED fixture with ivory powder coating for updown accent lighting of 6 W complete all as specified and as directed. Make Havells Model No. LHEHCWPBIN1W006

Material and labour for sub main wiring complete with two runs of 6 sqmm single core FRLSH grade PVC insulated unsheathed cable 1100 volt grade multistranded copper conductor drawn in and including PVC concealed conduit of suitable size and accessories surface on wall, roofs etc with one run of PVC insulated copper conductor 4.0 sqmm single core as earth continuity conductor connected with earth dolly and mains all as specified . (Note;- (i) 2 runs of 6 sqmm cable and 1 run of 4 sqmm single core copper cable and 1 run of non metalic PVC conduit shall be measured as single run. (ii) Cost of cutting chases shall deemed to be included in unit rate.)

Material and labour for sub main wiring complete with two runs of 4 sqmm single core FRLSH grade PVC insulated unsheathed cable 1100 volt grade multistranded copper conductor drawn in and including PVC concealed conduit of suitable size and accessories surface on wall, roofs etc with one run of PVC insulated copper conductor 2.5 sqmm single core as earth continuity conductor connected with earth dolly and mains all as specified . (Note;- (i) 2 runs of 4 sqmm cable and 1 run of 2.5 sqmm single core copper cable and 1 run of non metalic PVC conduit shall be measured as single run. (ii) Cost of cutting chases shall deemed to be included in unit rate.)

S & F MCB SPN 240 Volts, 6-32 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S & F MCB SP 6-32 Amps, 240 V, 50 HZ,breaking capacity 10KA, C series all as specified and directed.

Supply, Installation, testing & Commissioning of heater water storage type electric geyser (vertical cylindrical type) 25 Litre capacity with BEE 5 star rating(minimum) and metallic body ,porcelain enamel glass lined inner tank including fixing arrangement with providing including suitable capacity flexible cable 3 core with 3-pin plug of 16A capacity maximum 2metre length, PVC Connection pipe of suitable length for Hot and Cold Water, fixing on Walls with and including all necessary fitting material i.e. Mild Steel Bolts (Bolts to be grouted), Nuts, Washers, etc complete all as specified and as directed. Make : Usha Model No. Misty or equivalent of Bajaj / Havells / Crompton

Supply and fix Exhaust fan 300 mm(min) sweep MS CRCA body and metal blades with double ball bearing metal protective bird guard , AC single phase, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75 Sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model- Aeroclean plus DBB GBD of Usha

Supply and fix energy saving and environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection 25 W complete with clamp bolts all as specified and as directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPC or equivalent in Bajaj/Philips/Surya.

Supply, install, testing and commissioning of ceiling fan 1200 mm sweep complete all as specified and directed. Make :Havells Model Spark Deco or equivalent in crampton, Bajaj

Supply and fix sheet metal enclosures SPN DB's 8 way when MCBs to be used 240 Volts, double door.

S&F in replacement of Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core testing complete all as specified and directed.

Supply and fix sheet metal enclosures TPN DB's 4 way when MCBs to be used 415 Volts, double door all as specified and directed.

S & F MCB TPN 415 Volts, 63 Amps, 50 Hz, breaking capacity 10KA, C series all as specified and directed

S&F in replacement steel water tubing 50 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge. Note 1-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S Jiban Krishan Das and Co

D G Corporation

Anil Kumar Sarmah

M/S M N ENTERPRISE