Deposit - Construction of Chirakkal bridge in Nattika constituency in Thrissur district - Utility shifting of 150mm GI pipe and 350mm DI pipe and allied works.

Amount

Relaying Pipes

100.98.120:Supply of DI K9 Pipe Conforming to IS 8329/2000, 350mm Dia.

100.98.239:Supply of PVC Pipe, 10kg/cm2, 160mm Dia.

18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia

OD58481/2024-2025:Supply of PVC specials for 160mm Dia PVC pipe,10kg/cm2

100.98.440:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Single Orifice, Small Orifice Type S1, Size 25mm.

100.98.435:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 50mm.

OD49292/2024-2025:Supplying and fitting of 150 mm dia D.I. all flanged TEE

100.98.460:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm.

OD140597/2022-2023:Providing and fixing G.I. pipes including trenching and refilling etc. External work 150 mm dia nominal bore

OD49287/2024-2025:Supplying and fitting of 150 mm dia GI bend/ GI specials

OD49680/2024-2025:Providing and fixing 150 mm GI flanged joint including cost of welding

OD58535/2024-2025:Suplying and fitting 350 mm MS saddle and 50 mm flanged pipe for fitting air valve

OD58555/2024-2025:Supplying and fitting 150 mm MS saddle with all accessories for fitting 25 mm air valve

OD140598/2022-2023:Providing MS clamp using 10 mm thick MS sheet and fixing of 150 mm GI pipes

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.9.11:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 160 mm nominal outside diameter pipes.

100.14.6:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 350mm diameter Ductile Iron Class K-9 Pipes.

18.70.6:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:350 mm dia pipes

100.35.6:Testing 350mm DI/CI pipeline with potable water to the required test pressure. 350 mm dia Observed Data derived from item no.1024 of PHED DATA

100.32.3:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 50mm Double Acting Air Valve.

100.32.1:Conveying and fixing C. I. Single Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 25mm Single Acting Air Valve.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD161808/2022-2023:Taking connection from the existing line of size 110 mm dia to 160mm dia for connecting to the branch line using PVC saddle or PVC tee and specials including all labour charges, necessary earth work excavation and refilling, bailing out water, providing fencing and caution boards etc including cost of specials etc complete.

100.31.1.4:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 150mm diameter, Class I.

100.37.10.1:In situ fabrication of M.S. pipes of size 350mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD45615/2024-2025:Fabricating M.S. flanges of diameter 350mm using 20mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD56806/2024-2025:Fabricating and supplying 350mm (I.D.) M.S flanged Tees (350mm x 350mm x 150mm) with 20 mm thick flanges by gas/electric welding machine including cost of gas and welding rods, cutting and grinding all labour and hire charges of tools etc, complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

OD147662/2022-2023:Fabricating and supplying 350mm (I.D.) M.S flanged bends with 20 mm thick flanges by gas/electric welding machine including cost of gas and welding rods, cutting and grinding all labour and hire charges of tools etc, complete: For pipes fabricated with 8mm thick M.S. plates.

OD147156/2022-2023:Fabrication and supplying of M.S mechanical joint for jointing 350 mm DI pipe with 350 mm MS pipe by using 8mm thick M.S. plate for the body ,20 mm MS plate for flanges, 16x16 mm square bar end and welded inside at both ends for seating arrangements of rubber gaskets, providing 10 nos cleats at one end made from 10 mm thick MS sheet with cleat supports including cost and conveyance charges of M.S. plate, accessories like 20 mm rubber gasket and nut and bolts , all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

OD147729/2022-2023:Providing flanged joints to double flanged C.I./ D.I /MS pipes and specials, including testing of joints:350 mm diameter pipe

OD143116/2022-2023:Providing and fixing MS clamp using 10 mm thick MS sheet for fixing 350 mm MS pipes

OD158039/2022-2023:Conveying steel structure

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

jamaludheen va

Bidder Name

V.P.JOJI

jamaludheen va