COMPREHENSIVE MAINTENANCE INCL DAY TO DAY COMPLAINTS OF BUILDING WORK AND SEWAGE AT SECTOR B HARNI UNDER GE (A) BARODA.

Amount

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets in position or by taking down if required refixing existing builder hardware etc (removed for repair work of joinery) including providing glue, nails and screws etc required to make the joinery functional and refixing to position and rectifying other misc minor carpentry works assigned all as directed by Engineer in Charge. Note : (i) Items replaced shall be paid seprately at S&F rates and attending for the same shall not be counted and paid under this item. (ii):- The complaints are to be attended at atmost priority and delay will be penalised as mentioned in Particular specification.

Petty repairs to plumbing/internal water supply works such as repair to leaking taps, pillar taps, mixers, stop cocks etc by tightening and providing washer, repair to float valves, low level cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site all as directed by Engineer in Charge. Note : (i) Items replaced shall be paid seprately at S&F rates and attending for the same shall not be counted and paid under this item. (ii):- The complaints are to be attended at atmost priority and delay will be penalised as mentioned in Particular specification.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.

M & L for Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S & F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

S&F in repairs 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete. Make: Dyna and equivalnt ISI marked.

S & F in repairs double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.

M&L in repairs for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed.

M & L in repairs for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws.

S&F in repairs 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

S & F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

S & F in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified.

S&F in repairs mild steel helical door spring 200mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete.

Taking up or down GI tubing 15mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

S & F 20 mm outer dia (internal 16mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing obtained from item No. 15 here in before shall be used).

Taking up or down GI tubing 20mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

S & F 25 mm outer dia (internal 20mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing obtained from item No. 19 here in before shall be used).

Taking up or down GI tubing 25mm or 32mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

S & F 32 mm outer dia (internal 25mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Refixing old serviceable steel tubing 25 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing obtained from item No. 22 here in before shall be used).

M&L in repairs PVC (SWR) floor trap ( Nahani), plain with grating including jointing with solvent cement

S & F in repairs plastic seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S & F in repairs Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device.

S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type, "Orrisa" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC.

S & F in repairs PVC valveless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve, float and handle including bracket.

S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs PVC connection 600mm long of dia 15mm complete.

S&F in repairs PVC connection 750mm long of dia 15mm complete.

S&F in repairs PVC connection 900mm long of dia 15mm complete.

S&F in repair Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions.

S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete.

S&F in repair SS waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

Taking down eaves gutters and SWR pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece, single, (single Y) equal or unequal , 110mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece, single, (single Y) equal or unequal 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece, double, (double Y) equal or unequal , 110mm bore, complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal 75 mm bore, complete all as specified and directed.

S&F in repairs, 25 mm dia chromium plated tubular curtain rod complete all as specified and directed.

S&F in repairs chromium plated brackets(open end/closed end) with supports for 25mm dia curtain rod complete all as specified and directed.

S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as directed.

S&F in repairs including disconnecting tanks, 500 ltrs rotational moulded double layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

Disconnecting existing tanks exc 250 ltr but n exc 500 ltr, setting aside (or lowering if required), carrying out necessary petty repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

Disconnecting existing tanks exc 500 ltr but n exc 1000 ltr, setting aside (or lowering if required) carrying out necessary petty repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent.

All as per item No 56 here in before but 25mm dia complete all as specified and directed. Make : Prayag & equivalent.

S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe

S&F in repairs 15mm bore PTMT Bib tap standard or any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. Make : Prayag & equivalent.

S&F in repairs, bib taps fancy type chromium plated 15mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs, washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 495mm x 420 mm & bowl size 410mmx330mm x 160mm complete.

S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed.

S&F in repairs brass CP centre hole basin mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete.

S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete.

S&F in repairs, 20 mm dia, D type, CP towel rail 60 cm long between flanges complete all as specified and directed.

S&F 8mm thick plain edge moulded corner glass shelf of size 300 X 300 mm fix with cp double protection rail all as specified and directed by Engr in charge

S&F 8mm thick plain edge moulded cornor glass shelf of size 450 X 125 mm fix with cp double protection rail all as specified and directed by Engr in charge

S&F in repairs Chromium plated toilet paper holder.

S&F in repairs CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. Make : Prayag & equivalent

S&F in repairs toilet jet spray made out of stainless steel flexible tube of 15mm dia complete.

S&F in repairs round moulded PVC water tank lid for specially 200 ltrs, 500 ltrs, 1000 ltrs complete.

S&F in repairs stainless steel kitchen rack made of 0.63 mm thick stainless steel sheet of size 880 mm x 880 mm x 230 mm fixed to wall with screws complete .

S&F in repairs CI brackets 450mm long made with IAS 25x3mm suitable for wash hand Only basin complete.

S&F in repairs door sill of any size made up of rubber at the bottom and top is of aluminium sheet including screwing to protect from rats, snakes etc. complete all as specified and directed.

S&F in repairs CPVC pipe 40 mm bore fixed to flushing cistern to water closet of any type, including cutting complete all as specified and directed.

S&F in repairs, flush cock 25mm bore cast copper alloy with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs, magnet door stopper of size round or rectangular including all fittings fixed complete all as specified and directed.

S&F in repairs, chromium plated peg set for hat and coat hooks including all fittings fixed complete all as specified and directed.

Attending complaints of internal water supply pipes and fittings for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: - New pipes and fittings replaced if any shall be measured and paid under respective item of this schedule as S&F.

S&F in repairs, push tap 15mm bore CP screwed for iron pipe and fixed for urinals, complete all as specified and directed.

S&F in repairs Mild steel Mortice lock of 2 levers, vertical type, size 100 mm for Aluminium/Flushed doors complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouth of circulating pipe etc of capacity exc 250 ltr but n exc 500 ltr complete all as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouth of circulating pipe etc of capacity exc 500 ltr but n exc 1000 ltr complete all as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each & removing complete.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each & removing complete.

Taking down shutters of any description exc 1 sq. m but n exc 2 sq.m each complete

Taking down shutters of any description exc 2 sq.m each complete

S & F powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

M & L for 5.5mm thick sheet glass, exc 0.5 Sqm ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to frame work complete.

M & L for 4 mm thick sheet glass, n. exc 0.5 Sqm figured quality and glazing with rubber beading or with glazing clips, all as specified and directed.

S&F Framed work as in doors or gates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S&F 2nd class Hard wood 35mm thick glazed & skeleton door shutters open rebated & prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and miterd beds securing glass, sizes of members of shutters as specified in SSR part -I, section 8, clause 8.20(a) and fitted to chowkats.

M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description, not otherwise descri-bed over 10cm width or girth complete.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90 degrees and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of engineer in Charge & Manufacturers's speciifcations.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc. all as specified and directed.

M & L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 in any position

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement all as directed.

M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 , finished even and smooth (without using extra cement)

M&L Rendering 15 mm thick in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instruction, finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately).

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling.

M & L for preparation of new plastered surface of wall and applying three coats of white wash all as specified.

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer

M&L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of chalk whitening primer.

M & L for preparing old plastered surfaces of wall and applying two coats cement base paint on external wall.

M & L for preparing old plastered surfaces of wall and applying two coats of oil bound distemper over over a coat of chalk whitening primer complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick PCC 1:4:8, type D-2 Using 40 mm graded stone aggregate as in sub base of path/hard standing

M&L for 75 mm thick PCC 1:2:4 mix ,type B-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in path/hard standing/ flooring

M&L for PCC 1:3:6 type C-1 , 75 mm thick as in plinth protection, Path, floor complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 75 mm deep x 10mm wide, filled with pre formed sealing compound grade A complete all as specified and directed by EIC.

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes with CM 1:6.

M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:6 complete.

M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thick screed bed in cement morter1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set in vertical surface of wall or concrete surfaces over and iuncluding 10mm backing coat in CM 1:4 to receive wall tiles complete.

Material and labour for grinding and polishing of terrazzo floor with machine all as directed by Engr- in- Charge.

All as per item No.130 above but in skirting/dado (grinding/ polishing by hand).

Polishing of old existing Kota stone flooring i.e, grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

All as per item No.132 above but in skirting/dado (grinding/ polishing by hand)

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes with CM 1:6.

M & L chequered cement concrete tile 20cm x 20cm x 25mm thick with grey colour and pigment set and jointed in neat cement slurry including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6

M&L for Machine pressed, precast plain cement concrete Interlocking paver block, factoty made( with grey cement and no pigment) conforming to IS-15658-2006, 60mm thickness laid over and including 25 mm average thick sand cushioning layer & joints filled with sand in hardstanding etc, fabricated with M-35 grade concrete, complete.

M & L for Filleting in any position and to any shape n. exc. 25 sq. cm in cement mortar 1:4 including all mitres, stops, etc.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, brick masonary etc complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

M & L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts for shed and for grills including cutting top to shape as directed, drilling holes, notching for wire, etc. and including flat iron filletes for securing wire mesh or fence etc. including all necessary bolting riveting etc complete.

M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling wall and ceiling boards or insulation board any thickness including cover fillets complete.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers with G.I. wire mesh to hanging and size of grid 605x605 mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre (Fillets, metal frame work and G.I. wire mesh paid separately) complete

S&F non asbestos acoustic false ceiling 12mm thick with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger including three coats of white wash in ceiling boards or match the shed of existing surface to a true surface complete. Make: Armstrong or equivalent

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided

M & L for reinforced cement concrete1:2:4, type B1, using 20 mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for mild steel TMT bars 6mm to 8mm dia, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required, including a coat of Epoxy bonding agent of Dr Fixit/FOSROC/PIDILITE to old concrete/Cement surface and applying three coat of white wash/two coat of cement base paint to match with the existing surface complete all as specified and directed by the Engr- in -Charge. (Reiforcement will be measured and paid saperately under respective item).

M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete/sunken floors mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement. NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”.

M&L for 15 mm thick rendering on floor and vertical side of sunken floor of stone masonry surfaces/brick work/concrete surfaces in CM (1:3) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement and finished even and smooth without using extra cement complete all as specified and directed. NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”.

S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges.

Supply only liquid water proofing compound all as specified and directed. Make: Dr Fixit URP 300 or equivalent.

Complete removal of existing water proofing treatment APP membrane and cement plaster and cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge

Complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge

Complete removal of existing water proofing treatment including PCC tiles, plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge

M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions of cement finished surface even and fair without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately).

M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof (WPC will be measured and paid separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying atactic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minimuum 3 Kg/Sqm, 3 mm thick (minimum) with minimum 75 mm side overlaps and minium 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M&L for water Proofing treatment to roof slabs by applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying atactic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minium 3 Kg/Sqm, 3 mm thick (minimum) with minimum 75 mm side overlaps and minium 100 mm end overlaps complete all as specified and directed by Engr-In-Charge

M&L for water Proofing treatment to roof slabs by applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.25 Ltrs/Sqm, and laying self adhesive water proofiing membrane 1.5 mm thick with minimum 75 mm side overlaps and minimum 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over membrane complete all as specified and directed by Engr-In-Charge

M & L for brushing with neat cement slurry @ 3Kg/Sqm

M & L for Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Cutting grooves in brick parapet wall, 75mm wide and 65mm deep and shaping horizontal face of groove for sealing APP membrane in brick parapet wall with cement mortar 1:3 complete all as specified and directed.

S&F in repairs 25mm thick pre-formed filler for expansion/ crumple joints of roof slab.

Supply and fix Plain 0.63mm thick, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

S&F in repairs 25mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 mix ,type D-2, using 40 mm graded stone aggregate as in tank staging complete all as specified & directed.

M&L for Treatment of roof cracks in existing roof surface by cutting out portion along the cracks with mechanical equipment into 'V' shape, cleaning the cut out portion with compressed air to remove all foreign materials like dust, dirt, aggregates etc., apply the crack seal compound over existing cracks of roof as per manufacturer instructions or all as specified entire satisfication of GE/Engineer-in-Charge. Make: FOSROC/Dr Fixit/Pidilite or equivalent

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or not exc 10 Sqm on plan and not exc 1.5m in depth for shafts, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, n exc 1.50m wide and exceeding 1.50 m but n exc 3m in depth for foundation, etc. or not exc 10 Sqm on plan and exc 1.5m not exceeding 3m in depth for shafts, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, excavated approved soil spreading, leveling, watering and well ramming in layers not exc 25cm thick each complete all as specified. .

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes of 100mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in cement mortar all as specified and directed.

M&L for UPVC (SWR) 110mm dia pipes for sewage line laying in trenches in existing line of Stone glazed stone ware pipe/AC or Reinforced concrete complete all as specified and directed.

Demolition and breaking up drain pipes 160mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in cement mortar all as specified and directed.

M&L for UPVC (SWR) 160mm dia pipes for sewage line laying in trenches in existing line of Stone glazed stone ware pipe/AC or Reinforced concrete complete all as specified and directed.

Demolition and breaking up drain pipes 200mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in cement mortar all as specified and directed.

M&L for UPVC (SWR) 200mm dia pipes for sewage line in existing of Stone glazed stone ware pipe/AC or Reinforced concrete complete all as specified and directed.

M & L for concrete bed to drain pipes 110mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete all as specified & directed.

M & L for concrete bed to drain pipes 160mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete all as specified & directed.

M & L for concrete bed to drain pipes 200mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete all as specified & directed.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M & L for plain cement concrete type 1:2:4 B-1, using 20mm graded stone aggregate in surface channels, drains and coping with necessary form work complete as required & directed.

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) as in manholes.

Supply only Integral water proofing compound

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

M & L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping, bed blocks for rungs-hold fast including necessary formwork complete.

M&L for cleaning/desilting of manholes and sewage line upto 150mm dia pipe by roding etc. and subsequently bamboo spilt tied with rope through out the pipe from manhole to manhole and cleaning the pipe for easy flow of sewage including getting out solid/liquid materials from manholes of any size and any depth including flushing with fresh water after cleaning, taking up & refixing of manhole cover and removal of sewage out of MD land (Length of line will be measured including manholes) complete all as directed.

M&L for cleaning/desilting of manholes and sewage line exc 150mm dia but not exc 200mm dia pipe by roding etc. and subsequently bamboo spilt tied with rope through out the pipe from manhole to manhole and cleaning the pipe for easy flow of sewage including getting out solid/liquid materials from manholes of any size and any depth including flushing with fresh water after cleaning, taking up & refixing of manhole cover and removal of sewage out of MD land (Length of line will be measured including manholes) complete all as directed.

M&L for cleaning/desilting of manholes and sewage line exc 200mm dia but not exc 300mm dia pipe by using pumping, jetting, removal of sludge by super sucker etc or by any means and subsequently cleaning the pipe from manhole to manhole for easy flow of sewage including getting out solid/liquid materials from manholes of any size, any shape and any depth (depth ranging from 4m to 6m) including flushing with fresh water after cleaning, taking up & refixing of manhole cover and removal of sewage out of MD land (Length of line will be measured including manholes) complete all as directed.

S&F in repairs salt-glazed stoneware gully trap of size 150 x 150mm, square or round mouthed, type 'P' complete all as specified and directed.

M&L for removal of gully trap covers, opening access door of CI fittings and cleaning bend/tee near gully trap and refixing the gully cover to its original position complete Note: Under this item daily complaints of WCs/Kitchens/Bathrooms including line blocking will be carried out.

M&L for opening cover, checking for atrocious gases, preparing necessary precautions, spreading, bleaching powder, taking out excreta, sludge, night soil etc. from existing septic tank, sewage under ground sump/ soak well / manholes any size, any shape, any dia and any depth by pumping water / sludge with suitable pump or by any means (super sucker) and removal of sludge out side MD land burried underground up to minimum 30cm below ground level including necessary excavation of pits and returning filling complete for scooping out from inside.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for complete. (Note: this item shall be measured and paid for removal of precast MH cover, the unit rate shall be inclusive for removal of precast covers outside MD land).

S&F in repairs precast steel fibre reinforeced concrete drain covers, factory made in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate with and including reinforcement of 8mm dia TMT bars at 150mm c/c both ways including MS frame at the edges of cover and handles 2 Nos each cover made of 12mm dia MS round bar, set in CM 1:6 complete, thickness and sizes of covers shall be as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6.

S&F in repairs grating 150mmx150mm made out of stainless steel complete all as specified and directed.

City Light