Specification No.29/2020-21

Amount

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay , stiff black cotton, hard red earth, shales, murram,gravel, stoney earthand earth mixed with small size boulders SS 20.A

Dismantling and clearing away from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Supply and filling the basement with Msand for foundation and complete basement including watering consolidation etc.

PCC 1:4:8 using 40m HB stone for foundation including cost of al materials and labour etc., complete

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for sunshde with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Sill slab

Sunshade

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Lintel / Roof Beam with formwork including cost of all labour, materials, lead, lift, etc, complete but excluding cost fo steel reinforcement (by using mixer machine).

Brick Work in Cement mortar 1:5 using Chamber Burnt Bricks of size 9" x 4.5" x 3" including cost of all materials,labour lead ,lift etc complete.

Plastering the walls with CM 1:5, 12mm thick including cost of al materials,labour.lead.lift etc complete.

Fabrication, supply and fixing of MS steel door and window grills using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer.

Painting the inside walls with two coats of best quality Acrylic Distemper of approved colour over a interior primer coat of all materials, etc., complete.

Exterior painting with two coats of approved exterior emulsion over one coat of primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 A F.T.switch with continuous earth wire connection of 14 SWG TC wire for open PVC light point/Fan Point.

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48”) sweep AC celling fan (High Speed) of Crompton make complete with stepped electronic 300W regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450 mm(18”).

Wiring with 2x1.5Sqmm PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x100mm x113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point

Providing steel reinforcements for RCC works inducing cost of steel, binding wire and labour for cutting bendng tying and placing in position etc., complete.