Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | ₹31.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹32.0 L+₹99,286.54 (3.20%)Rejected-AOC | ₹32.0 L+₹99,286.54 (3.20%) | L2 | Rejected-AOC L2 |
| 3 | L3₹32.4 L+₹1.4 L (4.65%)Rejected-AOC | ₹32.4 L+₹1.4 L (4.65%) | L3 | Rejected-AOC L3 |
| 4 | L4₹32.5 L+₹1.5 L (4.73%)Rejected-Finance | ₹32.5 L+₹1.5 L (4.73%) | L4 | Rejected-Finance L4 |
| 5 | L5₹33.1 L+₹2.2 L (6.97%)Rejected-Finance BUILDING NO XIV 231 AMPARANIRAPPEL P O BHARANANGANAM KOTTAYAM 686578 | KOTTAYAM | KERALA | 686578 | ₹33.1 L+₹2.2 L (6.97%) | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | PRADEEP G L17 | CATT CONSTRUCTIONS L5 | v.abdul salim L11 | Joy John Parappilly L10 | BOSE THOMAS L7 | P RASHEED L14 | K R PAULSON L8 | IJAS C L3 | SHAMSUDHEEN K L6 | LIPIN M V L4 | PAUL K VINCENT L1 | ANISH MATHEW L2 | PradeepkumarV L9 | ELIAS SUNNY L13 | S AMBROSE AND CO L12 | SIJENDRA INNOTECH SOLUTIONS L16 | K. RAFEEQUE L15 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Appendix 1 | ||||||||||||||||||||
| 1.00 | OD62558/2026-2027:Providing and fixing precoated galvanised iron profile (trafford) sheets 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1,130.3 | sqm | 665 ₹7,51,652.16 | 750 ₹8,47,728 | 750 ₹8,47,728 | 750 ₹8,47,728 | 650 ₹7,34,697.6 | 736.87 ₹8,32,887.11 | 663.35 ₹7,49,787.16 | 700 ₹7,91,212.8 | 630.76 ₹7,12,950.55 | 606 ₹6,84,964.22 | 654.3 ₹7,39,557.91 | 825.3 ₹9,32,839.89 | 668.57 ₹7,55,687.35 | 750 ₹8,47,728 | 750 ₹8,47,728 | 602 ₹6,80,443.01 Lowest | 738.56 ₹8,34,797.32 |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 92 | metre | 690 ₹63,480 | 550 ₹50,600 Lowest | 700 ₹64,400 | 850 ₹78,200 | 700 ₹64,400 | 823.85 ₹75,794.2 | 741.65 ₹68,231.8 | 720 ₹66,240 | 705.22 ₹64,880.24 | 678 ₹62,376 | 668.5 ₹61,502 | 922.8 ₹84,897.6 | 747.5 ₹68,770 | 750 ₹69,000 | 790 ₹72,680 | 716 ₹65,872 | 825.74 ₹75,968.08 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 9,042.43 | kg | 182 ₹16,45,722.62 | 150 ₹13,56,364.8 | 172 ₹15,55,298.3 | 170 ₹15,37,213.44 | 175 ₹15,82,425.6 | 202.06 ₹18,27,113.81 | 181.9 ₹16,44,818.38 | 147 ₹13,29,237.5 | 172.97 ₹15,64,069.46 | 166 ₹15,01,043.71 | 147.25 ₹13,31,498.11 | 115.72 ₹10,46,390.23 Lowest | 183.34 ₹16,57,839.48 | 185 ₹16,72,849.92 | 164.9 ₹14,91,097.04 | 170 ₹15,37,213.44 | 202.53 ₹18,31,363.75 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 4,061.06 | kg | 182 ₹7,39,112.74 | 150 ₹6,09,158.85 | 150 ₹6,09,158.85 | 170 ₹6,90,380.03 | 150 ₹6,09,158.85 | 163.66 ₹6,64,632.92 | 147.34 ₹5,98,356.43 | 147 ₹5,96,975.67 | 140.1 ₹5,68,954.37 | 134 ₹5,44,181.91 | 147.25 ₹5,97,990.94 | 127.02 ₹5,15,835.71 Lowest | 148.5 ₹6,03,067.26 | 165 ₹6,70,074.74 | 165 ₹6,70,074.74 | 171 ₹6,94,441.09 | 164.04 ₹6,66,176.12 |
| 1.00 | OD96783/2024-2025:Providing and fixing UPVC Rain water gutter of 6" size to the galvanized sheet roofing to collect rain water firmly fixed to the truss member with all fittings to suit collect rain water such as center drop, end drop, joint, M S clamp, end cap etc complete. | 205.6 | metre | 819 ₹1,68,386.4 | 700 ₹1,43,920 | 600 ₹1,23,360 | 400 ₹82,240 | 425 ₹87,380 | 448.96 ₹92,306.18 | 404.17 ₹83,097.35 | 400 ₹82,240 | 384.31 ₹79,014.14 | 369 ₹75,866.4 | 320 ₹65,792 | 502.84 ₹1,03,383.9 | 407.35 ₹83,751.16 | 450 ₹92,520 | 650 ₹1,33,640 | 262 ₹53,867.2 Lowest | 449.99 ₹92,517.94 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 1,224.5 | sqm | 238 ₹2,91,430.05 | 30 ₹36,734.88 Lowest | 150 ₹1,83,674.4 | 130 ₹1,59,184.48 | 160 ₹1,95,919.36 | 144.25 ₹1,76,633.55 | 129.86 ₹1,59,013.05 | 110 ₹1,34,694.56 | 123.48 ₹1,51,200.77 | 118 ₹1,44,490.53 | 65 ₹79,592.24 | 161.56 ₹1,97,829.57 | 130.88 ₹1,60,262.04 | 150 ₹1,83,674.4 | 130 ₹1,59,184.48 | 150 ₹1,83,674.4 | 144.58 ₹1,77,037.63 |
| 1.01 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 89.6 | sqm | 390 ₹34,944 | 200 ₹17,920 Lowest | 350 ₹31,360 | 350 ₹31,360 | 300 ₹26,880 | 337.89 ₹30,274.94 | 304.18 ₹27,254.53 | 345.61 ₹30,966.66 | 289.23 ₹25,915.01 | 278 ₹24,908.8 | 261 ₹23,385.6 | 378.44 ₹33,908.22 | 306.57 ₹27,468.67 | 325 ₹29,120 | 350 ₹31,360 | 5,674 ₹5,08,390.4 | 338.66 ₹30,343.94 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.58 | cum | 11,200 ₹40,140.8 | 9,235 ₹33,098.24 | 9,000 ₹32,256 | 9,600 ₹34,406.4 | 9,000 ₹32,256 | 8,081.47 ₹28,963.99 | 7,275.17 ₹26,074.21 | 8,266.19 ₹29,626.02 | 6,917.74 ₹24,793.18 | 6,649 ₹23,830.02 | 6,557.54 ₹23,502.22 Lowest | 9,051.25 ₹32,439.68 | 7,332.44 ₹26,279.46 | 8,500 ₹30,464 | 9,000 ₹32,256 | 6,984 ₹25,030.66 | 8,099.95 ₹29,030.22 |
| 1.01 | 50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 180.4 | metre | 360 ₹64,944 | 325 ₹58,630 | 400 ₹72,160 | 300 ₹54,120 | 350 ₹63,140 | 310.42 ₹55,999.77 | 279.45 ₹50,412.78 | 317.52 ₹57,280.61 | 265.72 ₹47,935.89 | 255 ₹46,002 | 220 ₹39,688 Lowest | 347.67 ₹62,719.67 | 281.65 ₹50,809.66 | 320 ₹57,728 | 550 ₹99,220 | 312 ₹56,284.8 | 311.13 ₹56,127.85 |
Tender Value
₹45.2 L
EMD Value
₹50,000
Closing Date
24 Jul 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER PWD BUILDING DIVISION THRISSUR
DEPOSIT Providing truss roofing over LINAC building in Medical College Chest Hospital Thrissur General Civil Work 1 Asset belongs to Government Medical College Thrissur
2026_PWD_860347_1
14/2026-27/EE(B)TSR
Open Tender
Civil Works - Buildings
Item Rate
240 days
Govt Medical College Thrissur
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
Yes
₹50,000
Yes
18 Sept 2026
13 Jul 2026
27 Jul 2026
13 Jul 2026
24 Jul 2026
13 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Appendix 1 | |||||
| 1.001 | OD62558/2026-2027:Providing and fixing precoated galvanised iron profile (trafford) sheets 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 0.6 | sqm | - | - |
| 1.002 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | - | metre | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.8 | kg | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.6 | kg | - | - |
| 1.005 | OD96783/2024-2025:Providing and fixing UPVC Rain water gutter of 6" size to the galvanized sheet roofing to collect rain water firmly fixed to the truss member with all fittings to suit collect rain water such as center drop, end drop, joint, M S clamp, end cap etc complete. | 1 | metre | - | - |
| 1.006 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 0.4 | sqm | - | - |
| 1.007 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 1 | sqm | - | - |
| 1.008 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.009 | 50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | - | metre | - | - |
stage.html
html • 0.08 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1454861.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
SBD.pdf
Tender Documents • 1.64 MB
BOQ_1454861.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .