ADDN/ALTN TO BUILDING NO P-95, AND SPECIAL REPAIR TO BLDGS P-14 , P-46 AT DHQ NO 1, UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A'

M & L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified & directed by Engineer-in-Charge.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall below concrete or masnory apron using chemical emulsion at the rate of 2.25 liters per linear metre including drilling and plugging holes etc in apron complete all as specified & directed by Engineer-in-Charge.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floor using chemical emulsion at the rate of one liters per hole, 300mm apart includeing drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed by Engineer-in-Charge.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion at the rate of one liters perhole, at 300mm intervals includeing drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & directed by Engineer-in-Charge.

M&L Injecting chemical GLYPHOSPHATE 41% solution 20 ml till refusal, by making cut/injection in the stem of plant 30 mm C/C & spraying with solution (25ml Glyphosphoto 41% diluted with one litre of water) and removing the plants/vegetation including penetrated roots complete including necessary scaffolding etc all as specified and directed for the following :-

M&L PCC Type F2, 1:7:12 with brick aggregate as in lean concrete/filling concrete

M&L PCC type D-2 (1:4:8, using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and as directed by Engr-in-Charge

M&L Cement Concrete type B- 0 (1:2:4,12.5 mm graded stone agg) in roof padding concrete, kerbs or mud stops, rounded or chamfered on edges all around at the junction of parapet and the roof slab all as directed by Engr-in-Charge

M&L RCC (Design mix), type A1 (1:1.5:3 using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed by Engr-in-Charge.

M&L RCC (Design mix), type A1 (1:1.5:3 using 20mm graded aggregate) as in chajjas, lintels over 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating any height including necessary scaffolding, ladder & formork etc complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound (integral) complete all as specified and as directed by Engr-in-Charge.

M &L Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

M&L 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,etc complete all as specified and directed by Engr-in-Charge.

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions ,etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sq mtr each complete all as specified and as directed by Engr-in-Charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and as directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge

S&F 200mm long Aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F100mm long Butt hinges, medium weight, stainless steel with ISI marking complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 20mm dia Tubular towel rail CP Brass, 60cm long between flanges complete all as specified and as directed by Engr-in-Charge

S&F Aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&F in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

S&F Aluminium anodised XPM mesh, cut to size and fixed to Aluminium joinery as mosquito proofing mesh of wire and aperture size ,as per the sample approved and complete all as directed by Engr-in-Charge

All as per Item no 28 above but fixed in repairs

S & F MS angle iron or tee sections, framed brackets of angles or tees,(not exc 10 kg each bracket) conforming to Fe-290.Grade-E-165, purlins for fixing roof / fixing sheets as in chhajjas with coach screws and washers with 20mm wide x 3mm thick tie to frame work and fixed to walls / supports by means of dash screw bolts of suitable size including distance pieces, cleats etc. and welding complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge

All as per Item no 31 above but 6mm dia to 8mm dia. complete all as specified and as directed by Engr-in-Charge

All as per Item no 31 above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S&F Saftey lever locks mild steel with 4 leavers for rolling shutters fixed in repair.

S&F Ball bearing for rolling shutters fixed in repair.

S&F powder coated (50 Micron minimum thickness) aluminum frame for door ,windows,ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified. Note: a )Glazing shall be measured seperately. b)Item shall be paid as per weight of aluminium section .c)the rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge

S & F Powder coating Anodised aluminium door shutters,(minimum thickness of powder coating 50 micron), fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.

S&F aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 10 mm thick complete all as specified and as directed by Engr-in-Charge

Dismantling of aluminium partation, door, windows & ventilators including fittings & glass

M&L 20 to 25 mm thick Machine cut Kota stone slab flooring over cement screed bed, 1:4, 20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by engineer-in-charge.

M & L Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

M&L Glazed Coloured ceramic tiles in verticle surfaces 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed by Engr-in-Charge.

M&L 10mm thick Rendering in CM 1:3 on concrete surfaces as in ceiling/Chajja finished even and smooth without using extra cement including taking down cement plaster from brick walls including racking out joints scrubbing down with water etc to receive the plaster.complete all as specified and as directed by Engr-in-Charge.

M&L 10mm thick Rendering in CM 1:6 on fair face of concrete or stone or PCC block surfaces finished even and smooth wiithout using extra cement including taking down cement plaster from brick walls including racking out joints scrubbing down with water etc to receive the plaster.complete all as specified and as directed by Engr-in-Charge.

M&L 15mm thick Rendering in CM (1:4) mixed with integral water proofing compound @ 2% by weight of cement , on roof slab and wall surfaces finished even and smooth without using extra cement, including taking down cement plaster, racking out joints, scrubbing down with water etc to receive the plaster complete all as specified and as directed by Engr-in-Charge. Note:- Cost of Water proofing compound shall be deemed to be included)

Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 4omm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in masonary or RCC wall for spout (Cost of cutting holes and pipes shall be measured and paid separately) (ii) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 2% by wt of cement consumed. Sunken floor shall be filled (iii) All junction points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L Apply two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and as directed. (Vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 2% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. Note :- 1. Test the water proofed area (ponding test) by filling water for at least 72 hours and test for leakage/seepage and to the entire satisfaction of Engineer-in-charge. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above. Where dampness/seepage is noticed on testing , pressure groutine with coment mortar shall be done. 2. Demolition of sunken floor filling shall be measured and paid separately. 3. For the purpose of payment flat area sunken slab be considered.

M&L 3mm thick wall care putty on old and newly plastered surface of wall complete all as specified and as directed by Engr-in-Charge.

M&L 3mm thick wall care putty on old and newly plastered surface of ceiling complete all as specified and as directed by Engr-in-Charge.

M&L Two coats of OBD on new plastered surfaces of wall over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M&L Two coats of OBD on new plastered surfaces of ceiling over a coat of chalk white primer including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

M & L preparation surfaces of new plastered surfaces wall/chajja and apply one coat of acrylic exterior primer and apply two coats of weather proof acrylic emulsion exterior grade paint all as spacified & as suggested by the manufacturer of any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. .

M&L Preparing old distempered surface and applying one coat of oil bound distemper on walls all as specified etc complete all as specified and directed by Engr-in-Charge.

M&L Apply two coats of OBD on old plastered surfaces of ceiling including preparation of surface complete all as specified and as directed by Engr-in-Charge.

M&L complete removal of existing treatment of old plastered surfaces and apply one coat of acrylic exterior primer and apply two coats of weather proof acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturer at any height complete all as specified and as directed by Engineer-in-Charge. .

M&L providing and fixing of Granules textured homogeneous wall finishing system consisting of of a two component system of Dry Granules (25 Kgs per pack) made of 92% silica Particles coated with fade resisteant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating being between 0.8mm -1.2mm to be applied on a cured , smooth level plaster without keying, as per the shades/combinations approved, as per the manufacturer directions, for usages, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the Engineer-in-Charge, all complete . The above textureed coationg should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating top meet JISA 6909 on smooth plastered surface complete all as specified and as manufacturers specificataions /instructions. complete all as specified and as directed by Engr-in-Charge

S&F 4mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge

S&F 4mm thick Float glass plain provided to aluminium frame for door/window/partition with necessary aluminium powder coated snap beading and rubber gasket/packing complete all as specified and directed by Engr-in-Charge

S&F 12mm thick decorative prelaminated MDF board, on both sides, Exterior grade, cut to size and fixed as panel in aluminium door shutter and partition all as speified and directed by Engineer-in-charge.

M&L Preparing old wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved shade all as specified and as directed.

M&L French polishing on wooden surfaces of any description width or girth including cleaning, including prepairing the surfaces including a coat of wood filler on old surfaces all as specified.

Taking down Cast iron/AC/PVC of any dia and size fixed on wall or floor including all fittings complete all as specified.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm dia complete all as specified and as directed by Engr-in-Charge

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm dia complete all as specified and as directed by Engr-in-Charge

S&F 28mm bore Low density polythy lene (LDPE) pipes of pressure rating 6 Kgf /CM2 laid in walls/floors from WHB out let upto Nahani trap including required nos. of elbows/ fittings, and cutting chasing in, etc complete.

S&F 50mm bore High density polyethylene (LDPE) pipes of pressure rating 6kgf/sq.cm laid in walls/floors or in any position complete all as specified and as directed by Engr-in-Charge

S&F 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ) hoisted and fixed in positionall specified in SSR Part-I. complete all as specified and as directed by Engr-in-Charge including removing existing water tank for further disposal.

S&F Gun-metal, globe or gate valves 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge

S&F Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge

S&F 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Gem/Soma/Parko/Seiko)

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge, in repair. Make : Prayag or equivalent from makes given in list of makes.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm (rates includes for making good disturbed surfaces) complete all as specified and as directed by Engr-in-Charge.

All as per Item no 72 above, but 75mm dia.

S&F PVC (SWR) bends any radius of 75mm bore. complete all as specified and as directed by Engr-in-Charge.

All as per Item no 74 above, but 110mm bore.

S&F in repair 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S&F in repair 110 mm diaPVC (SWR) branch piece, double (double Y), equal or unequal

S&F PVC (SWR) branch piece, single(Y) equal or unequal of 75mm bore.complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) junction single (single T) equal or unequal of 75mm bore complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) vent cowl as specified of dia 75mm bore complete all as specified and as directed by Engr-in-Charge.

M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, with mild steel chromium plated or aluminised hinging device etc.) complete all as specified and as directed by Engineer-in-Charge, fixed in repair. Make: Prayag (Cat Pat No : 4016) & Prayag (Cat Pat No - WAVES-515) or equivalent from makes given in list of makes.

M&L Vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete fixed in repairs. any pattren complete fixed in repairs complet all as directed.

S&F 10 litre capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-501) or equivalent from makes given inlist by makes.

S&F in repairs, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F Vitreous china wash basin, white, flat back, size 550 x 400 mm including waste pipe, brackets including cutting for and pinning in ends of brackets or erecting stand in repairs complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make: Prayag (Cat Pat No : 4645) or equivalent from makes given in list of makes.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern and flush pipe and waste pipe) complete all as specified and as directed. Make: Prayag (Cat Pat No : 4645) or equivalent from makes given in list of makes.

S&F 15mm bore Bib taps, with flange chromium plated cast copper alloy with capstan head complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-8306) or equivalent from makes given in list of makes.

S&F 7" over head shower with 225mm with flange complete all as Specified. Make : Prayag (Cat Pat No BS-78) or equivalent model as approved by Engr-in-Charge

S&F 15mm Angle Cock, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-8510) or equivalent from makes given in list of makes.

S&F Tubular towel Rail CP Brass, chromium plated D type, 600 mm long between flanges complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-BA-40 or or equivalent from makes given in list of makes.

S&F Health Faucet square with 1 mtr tube and hook complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-BEA-85) as approved by Engr-in-Charge

S&F Glass Shelf 500 x 60mm (with ABS Brackets) 450 x 125 x 6mm complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No- BEA-47) or equivalent from makes given in list of makes.

S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mmcomplete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No- BEA-46) or equivalent from makes given in list of makes.

S&F Soap Dish CP Brass complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No-BA-45) or equivalent from makes given in list of makes.

S&F Peg Set of 6 complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No BEA-30) or equivalent from makes given in list of makes.

S&F Toilet Paper Holder, complete all as specified and as directed by Engr-in-Charge, fixed in repair. Make : Prayag (Cat Pat No BA-18) or equivalent from makes given in list of makes.

S&F stainless steel grating cover fixed in repairs to suit the 100mm dia nahani trap fixed with cement.

Supply and laying of CPVC pipes, of 20mm dia SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all asper manufacturers recommendations and complete all as specified and as directed by Engr-in-Charge

Supply and laying of CPVC pipes, of 25mm dia SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all as per manufacturers recommendations and complete all as specified and as directed by Engr-in-Charge

S&F 32mm dia PVC (flexible) waste pipe, 800mm long for WHB/Kitchen sink/Urninal complete.

S&F 40mm dia PVC (flexible) waste pipe, 800mm long for WHB/Kitchen sink/Urninal complete.

S&F 32mm dia CP waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks & fly nuts, flange end based in red lead cement complete all as specified & directed.

S&F 40mm dia CP waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly nuts, flange end based in red lead cement complete all as specified & directed.

S&F Cabinet Mirror 400 x 500 mm complete all as specified and as directed by Engr-in-Charge Make : Prayag (Cat Pat No 554) or equivalent as approved by GE.

Demolition for Brickwork or stone/boulder or PCC block masonry, build in cement or lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Demoltion of cement concrete (unreinforced) in ground floor and paving not exc.15cm thickness below or above ground level.

Demolition of Cement concrete in any description and in any position not other wise specifically provided directed by Engineer-in-Charge and removal of debris to out side MD land.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Separating, scraping and cleaning of reinforcement complete all as specified and as directed by Engr-in-Charge

M&L Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided, including errection of double steel scaffolding, covering with green cloth and all the safety measures/precautions and complete all as specified and as directed by Engineer-in -Charge. (i) Note: Contractor should take all precautions and ensure no damage to building structure & using steel scaffolding.

M&L Building up the profile of RCC structural members by using latex additives(MONOBOND) of pidilite modified air cured mortar system (Polymer mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and as directed by Engineer-in-Charge.

M&L Clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt etc, complete, applying two coats of alkaline rust converting primer FEOVERT of pidilite confirming to ASTM-B-117, on the rebars, with time interval of 6 hour between the coats and applying protective coating IPNET-RB of Pidilite complete all as specified and as directed by Engineer-in-Charge.

M&L Injecting at site cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plasticizer (Supercom-100) @ 250 ml per 50 Kgs cement. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Grouting shall be done by means of pump at a pressure of 0.5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. (for repair to slab)

M&L Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete

S&F MS 10 mm dia 150 mm long dash through fasteners, including drilling hole, in any type of masonary complete all as directed by Engineer-in-Charge.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coated GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in Chajjas, fixed with self tapping screws.

M&L complete removal of existing APP membrane and providing APP based membrane course roof treatment in layers with following provisions:- (i) M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/m2 incl cleaning surface all as specified and directed (ii) M&L Applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over APP membrane etc complete all as specified and as directed by Engr-in-Charge

M&L Block in course stone masonary built using Porbandar stone, well bonded built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L Point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed oncealed/recessed in wall or ceiling etc including 1.5 Sq mm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire including modular metal flsuh box with cover plate and frame of required moudule for mounting of modular switches, sockets, switch sockets fan regulator with required modules all as specified. Note: Cutting chases wall/floors/ceillings wherever required shall be deemed to be included in respective items. (a) One light point/ Fan point/ bell point controlled by one way switch.

(b) One 3 pin 6 Amps switch socket outlet on same board

(c) One 3 pin 6 Amps switch socket outlet on indipendent board

(d) One light point controlled by 2, two way switch

M&L Point wiring complete with 2.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed oncealed/recessed in wall or ceiling etc including 2.5 Sq mm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire including modular metal flsuh box with cover plate and frame of required moudule for mounting of modular switches, sockets, switch sockets one 3 pin 15 or 16 Amps socket outlet on independent board as specified. with required modules all as specified etc Note: Cutting chases wall/floors/ceillings wherever required shall be deemed to be included in respective items.

Supply & fix modular switch 1 way, 6 Amps, 1 modular complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply & fix modular switch 1 way, 16 Amps, 1 modular complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply & fix modular socket, 6 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply & fix modular fan regulator, 120 watt, 2 moduler .complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply & fix ceiling rose, surface bakelite, 65 x 17 mm three terminals complete all as specified and as directed Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply and fix modular bell push flush type, 240 volts, 6 Amps, 1 module complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

Supply and fix modular switch 2 way 6 A 1 module all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

S & F Bell mutli music type complete all as specified and as directed. Make: Crabtree(Athena), Havells(Oro), Anchor(Vision)

S&F 19/ 20W Surface/Wall mounted Batten LED Luminaire connected with 3 core flexible copper cable of appropriate size from ceiling rose to LED fitting complete all as specified and directed, fixed in repairs Make : Wipro Trim LED (LL20-281-XXX-65AL1/Philips (BN308C-LED40S-6500 L120 PSU WH) or OSRAM LUXPOWER BATTEN 19WL840)/ Bajaj Cat no (BLTRU 20W WH VIVA)

S&F 12W Recessed mounted round shape LED downlight including electric connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to fixture complete all as specified and directed, fixed in repairs. Make :Wipro (CRDL11R017HP57) /Philips (Green Perform) / Bajaj Note : Cost of cutting and fittings in exisitng false ceiling deemed to be included in quoted rate.

S & F Single pole and neutral enclosure with pin and earth plug and socket including MCB SP 20 Amps 'C' Series 10KA complete and in repair all as specifed and as directed Make: ABB / Schneider / Seimens / Legrand / L&T

S&F LED street lights, 25 W, lumen output not less than 2500 lm high pressure die cast aluminum housing, 140-270V, 50 Hz, PF>0.90, including 1.2 mtr long 25 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamps of FI 40mmX 6mm with bolts, nuts, washers and conductor to fitting with 3 core 1 sqmm PVC insulated copper cable from control box to fitting complete all as spd. Note: The quoted unit rate deemed include for painting to clamps with one coat of redoxide paint before fixing. Complete in repair all as spd and directed by Engineer-in-Charge. Make:- Wipro skyline LED (Cat no LR06-311-XXX-57-XX)/Halonix (HLSLD-07-25-CW-E)

S&F DB VTPN, 4 Way, double door, IP 63 Protection, with connected accessories like insuated bus bars, insulated neutral bars & earth bar, blanking plates, cable management kit, incoming as MCCB Four pole 63/40 Amp, 415 Volt-01 no and Outgoing MCB SP 10-25 Amp ,10KA, C series-12 nos complete all as specified and directed,fixed in repairs. Make: ABB / Schneider / Seimens / Legrand / L&T

M&L Earthing complete with galvanised steel earth plate electrode incl necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth strip 32x 6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm bore medium grade PCC pit with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. NOTE :(1) The concrete pit shall be PCC 1:3:6 tye C -1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars with suitable cast iron handle shall be provided (ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip (iii) Item includes the cost of 7.5 mtr length earth strip 32 x 6 mm

M&L Sub main wiring with two runs of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable,fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) but shall be increased as per actual site requirement in accordance,with wall thickness not less than 1.8 mm complete with all necessary fitting and including with conduit accessories and one run of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor 1100 volts grade cable fire retardant low smoke as earth wire conductor, fixed on wall/ceiling complete all as specified and as directed. Note: Cutting chases wall/floors/ceillings wherever required shall be deemed to be included in respective items.

Taking down exisitng unservicable submain wiring along with acessories all as specified and as directed

Taking down exisitng unservicable point wiring along with acessories all as specified and as directed

Taking down ceiling fan, painting with synthetic enamel paint by spray including filling cavities, with filler one coat after cleaning all as directed and hanging after repair and painting connecting with cable all as specified and as directed

Supply and fix 9W, Moon LED round, IP 65, CCT 6000K, ABS plastic housing with CRCA reflector and HET diffuser to enlighten gardens,parks,backyard and greenhouse areas with high efficiency and brightness suitable for wall/ ceiling light complete in repair all as specified and as directed Make- Cat Ref LW01-101-XXX-60-XX of Wipro/Eqv

Bharat Enterprise