PROVN OF ARMOURER SHOP IN QUARTER GUARD COMPLEX AT GLR 55 UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Providing and injecting chemical emulsion for pre construction Antitermite Treatment by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engr-in-Charge.

Providing and injecting chemical emulsion for pre construction Antitermite Treatment by treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed by Engr-in-Charge.

Providing and injecting chemical emulsion for pre construction Antitermite Treatment by treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engr-in-Charge.

Providing and injecting chemical emulsion for pre construction Antitermite Treatment by treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engr-in-Charge.

Providing and injecting chemical emulsion for pre construction Antitermite Treatment by treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed by Engr-in-Charge.

M & L for Cement Concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete

M & L for filling of moorum or red bajri under floors or paving, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3 , using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3, using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1.5:3, using 20 mm graded stone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6-8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 19 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works for fair finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping for fair finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges in fair finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in fair finished surface of concrete complete all as specified and directed.

M & L for brickwork with sub class 'B' bricks , straight or curved on plan, 6m mean radius, built in CM 1:6 complete all as specified and directed

M & L for rendering 10 mm thick plaster on fair faces of brickwork or concrete surfaces in CM 1:6 with sagol finish complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound & finished even & smooth without using extra cement complete all as specified and directed.. (Note: WPC shall be measured & paid seperately)

Supply only liquid water proofing compound.

M & L for 5 mm thick rendering on ceiling of concrete work with cement mortar 1:3 complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor & finished even and rough complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over and including Cement screed base 15mm thick in CM 1:3 and jointed with grey cemnet slurry mixd with pigment to match the shade of the slab including cutting with mirror polishing complte all as spcified and directed

All as per item no 32 above but on skirting including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a 3mm thick (average) of wall care putty complete all as specified and directed by Engineer in Charge. Make- (a) Nerolac (b) Berger Paints (c) ICI India (d) Asian Paints(Tractor Brand)

M & L for preparing new plastered surfaces of wall and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engr-in-Charge and as per manufacturers instructions. Make: "Apex Ulitima" of Asian Paints "trucare" Primer / "Weather coat all Guard"of Berger Paints / Dulux weather shield Max of Dulux Paints/Excel top Guard of Nerolac paints as approved by GE complete all as specifeid .

M & L for three coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M & L for water proofing treatment using polymerised membrane to roof slab including 10 mm thick plaster in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacturer's instructions and applying bitumenous primer @ 250 gms/sqm, and then laying 3mm thick APP modified bituminous membrane with non woven polyester matt as reinforcement weighting not less than 3.5Kg per sqm, laid on primed surface with torch application method by providing overlap minimum 100mm on logitudinal and 150mm on transerve direction and finishing the surface with solar reflective bituminous aluminium paint at the rate of 100 grams per sqm with preparation of treated surfaces, all angles and similar projections should be sealed well with extra care to ensure full bondage, all joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR Latex @ 200ml/bag of cement. Make- 1.STP Ltd 2 Texsa India Ltd 3 Dr Fixit 4 Tiki Dan .

S & F for pressed steel doors frames with one or more rebates including necessary fixing lugs, hinges, lock strike plates of size 105x60 mm complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4 in door frame filling complete all as specified and directed.

S & F factory made 35 mm thick 2nd class hard wood plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneers on both faces and size of the rail style as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated complete all as specified and directed.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded including guard bar 12mm square etc. complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples complete all as specified and directed.

S & F 3.0 mm thick glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane complete all as specified and directed. Make -(a) Saint Gobin (b) Asahi (c) Atul Glass Industries (iv) GOld unserviceableen Fish (v) Modi Guard (vi)Hindustan Pilkington Glass

S & F stainless steel butt hinges, heavy duty of 125mm size complete all as specified and as directed by Engr-in-Charge.

S & F stainless steel butt hinges, heavy duty of 100mm size complete all as specified and as directed by Engr-in-Charge.

S & F extruded aluminium anodised alloy handles, fabricated type,150 mm long complete all as specified and directed.

S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S & F 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F 300 mm long aluminium alloy anodised sliding door bolts with hasp,staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as directed and specified Make for Item No. 45 to 52 : Classic/ Shalimar/ CLIF/ARGET

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not exc 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make for Item No. 53 & 54- (a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

M&L for 75 mm thick P.C.C 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection cement concrete surface complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 mix, type D-2 (40 mm graded stone aggregate) as in sub base for tiling complete all as specified and directed.

M & L machine pressed precaste concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 grade with grey cement and pigment including 25 mm thick sand coushioning layer complete all as specified and directed. Make- (a) M/s Swami Tiles (b) NITCO (c) Mehtab Tiles , Indore (d) CEME (e) M/s SAP Pavers, Jodhpur (f) M/s Shree Tiles Ah mednagar (g) Navya Tiles, Jodhpur (h) Sagar Tiles, Saharanpur (i) Renuka Tiles (j) Topaz Tiles (k) M/S Ultra Tiles

M & L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5 Sqm copper conductor FRLSH in and including PVC casing caping and surface/concealed PVC Conduit and accessories having ISI Mark to be fixed with proper screws (MS Steel strips if required) including all accessories/ fitings/ junction boxes/ inspection covers etc including hard PVC board of required side fixed with wall surface by means of brass screws and sunk/cupwasher, for mounting of switches fan regulators etc including 1.5 Sqm (22/0.30mm) 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLSH cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and applying two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch complete all as specified and directed by Engineer-in- Charge Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit/Casing caping : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

All as per Item no. 58 above but One fan point controlled by one switch

All as per Item no. 58 above One socket 5 Pin 5 Amps flush type on same board

All as per Item no. 58 above One socket 5 Pin 5 Amps flush type on independent board

S & F Switch piano flush type single pole one way 230V 6Amps complete all as specified and directed by Engineer-in- Charge

S & F socket outlet 2 in 1, 3 pin 5 Amps Flush type 230V S.P Multipupose types complete all as specified and directed by Engineer-in- Charge

S & F ceiling rose surface PVC 50 mm dia three terminal including PVC mounting block, white/voury/urea finish complete all as specified and directed by Engineer-in- Charge

M & L for steppped type electronic fan regulator flush type on phenolic laminated sheet etc as required for ceiling fan 230 volt AC supply, 50HZ 1200 mm sweep complete all as specified and as directed. Make for Item No. 62 to 65- (a) Anchor Roma (b) Legrand (c) Crabtree (d) Havells (e) Indo Asian (f) Polycab

M & L for MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 volts with 200 Amps rated bar 4 way complete all as specified and directed by Engineer-in- Charge

S & F MCB SPN 5-40 Amps, 240 volts 10KA, C series complete all as specified and directed by Engineer-in- Charge

S & F MCB SP 5-40 Amps, 240 volts 10KA, C Series complete all as specified and directed by Engineer-in- Charge Make for Item No. 66 to 68: (i) Larsen & Tubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric

S & F 20 watt LED, 6500 K, 4 feet long fixed including on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make: Wipro model no Wipro Garnet 20 W aluminium LED Batten light 6500K, D560565 / Havells LED Pride Plus 22W 6500K / Philips model No - BN150W LED20S-6500 PSE OD GR

S & F Energy efficient BEE Star rated with 5 Star rating ISI Marked with CM/L No ceiling fan of capacity 1200 mm sweep, copper wound , operating on 230 V AC, 50 Hz confirming to IS-374 (Latest) with out regulator and with standard fittings like down rod, Aluminium blades of standard thick ness(1.1 mm), clamps etc complete including provision of 2 core PVC sheathed flexible cable of 23/0.0076 from ceiling rose to ceiling fan all as specified and directed by Engr-in- Charge Make- Bajaj/Havells/Crompton/Philips

Supply, laying & testing cable LT XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duly , IS-7098 Part-II, with stranded aluminum conductor LT 1100 volts grade of size 16 sq mm 4 core size complete all as specified and directed. Makes :(i) Cable Corporation of India, Mumbai, (ii) Havells india ltd, (iii) Universal Cables Ltd, Satna, (iv) Asian Cables (RPG), (v) Gloster, (vi) RPG Cables Ltd , Thane, (vii) Finolex, (viii) Polycab

Supplying & laying DWC HDPE pipe of outer dia of 50mm and inner dia of 40mm polyethylene(PE) with smooth internal and profiled external surface for non pressure for underground cable including bends complete all as specified and all as directed by Engr-in-Charge. Make- (a) Rex Polyextrusion Ltd (b) Finolex (c) Prince Pipes and fittings ltd (d) Kisan (e) Supreme (f) JAIN IRRIGATION SYS (g) Astral

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to using galvanised iron wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron. Earth wire protected by GI pipe of size 15mm bore(light grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe light grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Star Construction

M/S RENUKA CONSTRUCTIONS