SPECIAL REPAIR TO BLDG NO P-295 OF FIRST FOOLR (BANGA BLOCK) OF EME SCHOOL AT OUTRAM LINE UNDER GE (ARMY) BARODA

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each. Complete all as specified and as directed

-Ditto- as per item No 1 above but area n.exc. 1.5 Sqm each. Complete all as specified and as directed

M & L for 35mm thick factory made Flush shutters,solid core construction, with particle board core and plywood face panels,comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish,6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. (app. Panel size 0.60x2.0m)

M&L 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of trimming plain chamfered or rounded fitted with cut and mitred beads for securing/ gauge etc sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) and all as specified.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and matching with door shutter shade. The door frame shall be tied to the wall using 75/100mm long MS screw as directed .

S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, xomplete all as specified and directed by Engineer-in-Charge

S&F Powder coated aluminium window shutters, side hung/sliding type aluminium sections including necessary jointing cleats, sash bars, glazing clips, rubber neophrene packing, handles 01 Nos in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc as per manufactures instructions and trade practee and all as specified and directed by Engineer-in-Charge

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Supply and fix sheet glass 4 mm thick oridinary quality and glazing with rubber packing to sliding windows/ventilators in square not exceeding 0.50 sqm in each pane.

Supply and fix figured glass 4 mm thick pin headed type and glazing with rubber packing to sliding windows/ventilators in square not exceeding 0.50 sqm in each pane.

M&L for preparation of newly wooden surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding.

S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed

S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed

S&F in repairs 60cm long CP Brass 20mm dia tubular towel rail with flanged. ends.

S & F in repairs C.P grating of size 150 x 150 mm.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete all as specified.

S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps but incl brackets, Cp waste coupling all as specified.

Supply and fixing CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complet all as specified.

Supply and fix PVC (SWR) Floor/gully trap of size 125/110mm setting and jointing with solvent cement.

S & F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy,fency type screwed down high pressure with capston head screwed for iron pipe

S & F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified.

S & F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed.

S & F in repair Toilet Paper holder of chromium plated fixed to all with chromium brass screw complete all as directed.

S & F in repair of chromium plated hand shower (Health faucet) 15mm dia 1 mtr long tube acrylic type complete all as directed.

S & F in repair of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed.

S & F in repair 15 mm bore MS chromium plated shower rose of size 125 mm heavy grade with accessories completed all as specified.

S & F in repair CP Towel ring brass chromuim plated all as specified.

S & F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete all as directed.

S & F in repairs aluminum door seal of suitable section fixed to door shutter with screw complete all as specified.

S &F repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but encluding fixing bolt and necessary connection with existing pipes completed all sepecified and directed.

Cutting chases for concelled pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete all as specified.

Taking down steel tubing and connection including cleaning for refixing the same in new or old position all as directed of following size fixed on wall and ceilings:

15mm dia

20mm dia

S & F galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape all as specified.

15mm dia

20mm dia

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level).

Demolition/dismantling of stone slab/tiles of any description or thickness in floor, wall, aprons etc. Laid bedded and pointed in any mortor (without taking off backing coat) complete.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortor (1:6) complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.18sqm and n. exc 0.38 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortor (1:6) complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10mm thick in CM 1:4

M & L for glazed ceramic coloured wall tiles in vertical surface 300x 200/350x250/450/350mm &7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rendering in CM : 1:4 complete all as specified and directed.

Taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed.

M& L for 15 mm thick rendering in cement mortor 1:6 on brick work or concrete surface on wall finished even and smooth without using extra cement complete.

M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only water proofing compound.

M & L for rendering 10mm thick on brick or concrete surface of ceiling in cement mortor 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 1 to 1.5mm thick wall care putty on wall complete all as specified and as directed

M & L for prepartion newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for prepartion old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M& L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M & L for complete removal of exisiting treatment on wall surface and apply two coat of oil Bond distemper over 1 to 1.5mm thick wall care putty and priming coat complete all as specified.

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete all as specified and directed.

PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

PVC (SWR) pipes, 100 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

PVC (SWR) bends without access door suitable for 100/75 mm mm bore pipe fixed complete.

PVC (SWR) bends with access door suitable for 100/75 mm mm bore pipe fixed complete.

S & F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete all as specifed and directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping bed plate for hold fast etc including necessary from work etc complete all as specified and directed.

Repairs by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement etc complete according to intruction of eng- in - charge. Make Fosroc/piditlite or equivalent

Repairs by application of approved epoxy based bond coat on concrete surfaces or sound bonding of cold and new concrete surfaces according to instructions of engineer in chargeMake Fosroc/ pidilite or equivalent

Making of profile of structral memebers with polymer modified mortar in damaged areas 1:3( Cement:sand) mortar with 5 -10percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete . Make Fosroc/ Pidilite or equivalemt

Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded stone aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( including reinforcement) if required complete and applying 3 coats of white wash / 2 coats of cement base paint to match with existing surfaxes as directed by engineer in charge complet( Note reinforcement will be measured and paid seperately under respective items)

Material and labour MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete

Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete all as directed.

Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

Providing and fixing factory made 18(+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of enginer in Charge, Manufacturers's speciifcations

S & F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring etc and all as specified and directed

Supply & fix rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) 1000 litrs capacity hoisted and fixed in position including dismantling and removing existing PVC water storage tank all as specified and directed

Supply & Fix in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete all as specified and directed.

Supply & fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

M&L for 16 to 18mm thick green marble in one piece machine cut as in cooking plate form, steps, window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified.

Complete removal of existing unservicable roof treatmen incl taiking down plaster, padding of any description and any position, cleaning, flushing out junctions of parapet wall washing down with water etc to prepare surface for new WPT including removing off rubbish at out side MD land. and all as specified and directed

Material & labour for 50mm average thick PCC padding in Cement concrete (1:2:4) type B0 (Using 12.5mm graded stone aggregate) mixed with liquid water proofing admixture as per manufacturer's instructions finished even and smooth without using extra cement for laying of WPT WPC measured seperately) and all as specified and directed.

Material & labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30Ltr per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.0 kg per Sqm 3mm thick of unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions

Supply only liquid water proofing admixture Make-Pidilite

M&L for sunken treatment of WC/Bath with polymeric membrance (APP based) with non woven polyster mat as reinforcement including water tightness test with filling of water for continuous 48 hours with following :-

Demolition of existing PCC /lean concrete including floor tiles and removing rubbish off the premises.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound @2% by weight of cement plaster surface should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying APP based polymeric membrance of weight of 3 kg/sqm with non woven polyster fibre as reinforcement over a coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm by torch application with side over laps & longitudinal joints over laps etc as per manufacturer instructions complete all as specified and as directed.

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded stone aggregate) with water proofing compound @3% by weight of cement for laying floor tiles. Note (WPC will be measured and paid separately).

Taking down UNSV copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Dismantling and taking out carefully submain wiring 2/3/4/6 wire of any size keeping in safe custidy of contractor for reuse at site all as directed by Engineer-in-Charge.

Refixing sub main wiring concealed as retrived from item No 88.00 here in before,and including rerouting if required of any size fitting complete all as directed by Engineer-in-Charge.

Taking down carefully and refixing of MCB DBs any make or capacity with MCBs /Isolators/RCCBs etc complete at old/new place after rewiring all as directed at site.

Taking down carefully MCBs from existing MCBs DB and refixing the same of any make or capacity etc complete at old/new place after rewiring all as directed at site.

Taking down carefully and refixing of energy meter any make or capacity etc complete at old/new place after rewiring all as directed at site.

Taking down old unsv tube light and Supply & fix LED tube light along with fixture, 18W

M&L for concealed point wiring (modular fittings) complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694, ISI marked with accessories concealed in wall/roof/ceiling etc and including sunken pressed steel terminal boxes for modular in wall but including modular white cover with frame including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed FRLS cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light/fan/bell point controlled by one switch 6 amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin switch & socket on same board with other switches.

All as described above in Item No 94.00 but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

One light point controlled by two 2 - way switches, with cables 1.5 sq. mm size ®

All as described above in item No 94.00 but point wiring with 4.0 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 4.0 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure

S & F MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete all as directed by Engr-incharge. Make: Legrand/Schneider/L&T/C&S

S&F MCB TPN 4pole 63 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB Make: Legrand/Schneider/L&T/C&S (DB will be measured and paid separately under respective items of sch A)

S& F MCBs DB SPN 12 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V ,complete all as directed by Engr - in - charge.

S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB Make: C&S/Havells/HPL/Schneider (DB will be measured and paid separately under respective items of sch A):-

MCB SPN 5 to 40 Amps.

MCB SP 5 to 40 Amps

S&F modular white cover plate with frame, 2 module Complete all as specified & directed Make : Legrand/Anchor/Havells

S&F modular white cover plate with frame, 3 /4 module Complete all as specified & directed Make : Legrand/Anchor/Havells

S&F modular white cover plate with frame, 8/12 module Complete all as specified & directed Make : Legrand/Anchor/Havells

S&F Metal Flush box 1/2 module Complete all as specified & directed, Make : Legrand/Acher/ Havells

S&F Metal Flush box 3/4 module Complete all as specified & directed, Make : Legrand/Acher/ Havells

S&F Metal Flush box 8/12 module Complete all as specified & directed, Make : Legrand/Acher/ Havells

M&L modular switch 1 way 6 A, 1 module Complete all as specified & directed Make : Legrand/Anchor/Havells

M&L modular switch 1 way 16 A, 1 module Complete all as specified & directed Make : Legrand/Anchor/Havells

M&L modular socket, 6A-2/3 pin combined, 2 module Complete all as specified & directed Make : Legrand/Anchor/Havells

M&L modular socket combination 16 Amps, 6 pin, 3 module Complete all as specified & directedMake : Legrand/Anchor/Havells

S & F modular fan step regulator 120 W - 2 module Complete all as specified & directed

M&L modular bell push 6 A 1 module Complete all as specified & directed Make : Legrand/Anchor/Havells

M&L bell multi music type Complete all as specified & directed directed Make : Legrand/Anchor/Havells

S&F ceiling rose 65x17mm three terminals Complete all as specified & directed.

M&L switch piano flush type single pole, two way 6amp Complete all as specified & directed.

Refixing of old serviceabe tube light fitting 36/40 watt 4" of any make retrieved from site for stair case mounting on two PVC square boxes of size not less than 75mm X 75mm complete including connection of fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed.

Sub main wiring with two single core PVC insulated and unsheathed Fireretardant multi stranded copper conductor cable 1100 volt grade IS-694,marked of 6.00 sqmm size drawn through concealed conduit ISI marked including one run of 6.00sqmm PVC insulated and unsheathed Fire retardant multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core cable 6 sqmm respectively and one run of 6.00 sqmm copper cable as earth continuity conductor and 32mm dia casing caping with accessories shall be measured as one length.

Sub main wiring with four single core PVC insulated and unsheathed Fireretardant multi stranded copper conductor cable 1100 volt grade IS-694,marked of 10.00 sqmm size drawn through concealed conduit ISI marked including one run of 10.00sqmm PVC insulated and unsheathed Fire retardant multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Four runs of single core cable10.00 sqmm respectively and two run of 10.00 sqmm copper cable as earth continuity conductor and 32mm dia casing caping with accessories shall be measured as one length.

S & F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amp. Make Legrand/ Schneider/ABB/C&S

S& F lamp holder, PVC/Polycarbonate type and back plate suitable for batten fitting with & including LED bulb of 14W, 230Volts of make Philips/Wipro/Crompton alongwith suitable adopter to fixed in lamp holder for tubelight fittings complete all as specified

S & F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. Make- Havells, Model-ENDURACITYLITEPLATSL20W LED 757SASYBOPC or equivalent in Phillips/Wipro/CG.

Supply, Fixing, Testing & Commisioning of 2' 10W Mirror LED Batten with system lumen output of 1000 lumens. System Efficacy should be > 85lm/ W. PF>0.95 Housing of luminaire should made of die cast alumunium including connecting fitting with not less tha 0.5 sqmm 3 core flexible stranded copper conductor wire upto ceiling rose complete all as specified & directed. Make- Havells, Model-ENDURALINEARNEOBS1W LED 830SPCWH or equivalent in Wipro/Philips

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point

Returning filling including spreading leveling watering and well ramming in layers n.exc 25 cm in soil completed all as specified and directed

M&L for sand cushoning, to cable with river sand and punning to provide required cover for UG cables all as directed at site. Note : punned thickness shall be measured.

M&L brick protection cover to electric cable with class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm.

Supply and laying or fixing or passing through pipe,XLPE insulated armoured heavy duty electric cable with aluminium conducto1100 volts grade cross sectional area 50 sq. mm 3.5 Core .

M&L for galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Badri Electricals

Shree Vaishno Enterprises