External Finishes/internal finishes to Cantt. Fund Buildings.

Amount

Scrapping down old whitewash/snowcem/Painted Surface and preparing the existing surface all as sp.

Taking down cement plaster on brick walls etc. including raking out joints, hacking for key, scrubbing down with water etc. all as sp.

M/L PC Plaster in cement Mortar 1:4,12 mm thick finished even and smooth (without using extra cement) on walls all as sp.

Ditto, but PC Plaster in cements Mortar 1:4, 12 mm thick finished even and smooth including water proof compound all as sp.

M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of primer followed by two coats of premium Acrylic emulsion such as Asian/nerolac/Berger or equivalent to smooth interior finish all as sp.(on ceiling/walls)

M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of primer followed by super fine roller coat finish of spectrum or equivalent to be applied with foam Roller, Finally coated with two coat premium exterior emulsion/Apex or equivalent all as sp.

M/L Putty two coats grinding plaster surface with sand paper, putty filling again grinding to even smooth surface and one coat of Exterior Water Based Primer followed by textured finish with Trowel natural stone finish from spectrum or equivalent acrylic plaster with grains-Application of one coat of natural stone finish upto 1.5 to 2mm thick with trowel followed by transparent silicon to make surface water repellent all as sp.

Heritage Granule finish/Rustic Finish- Application of one coat of quartz primer of spectrum or equivalent and application of granules of desired shade with trowel and top coat of transparent silicon to make surface water repellent all as sp.

Metallic Finish-Application of one coat of primer followed designer roller finish of desired design followed by two coats of luxury interior/exterior emulsion and finally one coat of metallic emulsion Nerolac/Asian or equivalent all as sp.

M/L Rough flooring 25 mm thick in cement concert 1:2:4 for laying tiles all as specified in MES SSR 2020.

M/L screed bed or bedding layer of cement mortar 1:3, 20 mm thick for laying any kind and size of tiles/marbles.

Execpt tiles: Fixing only glazed or ceramic, vitrified tiles of any size on walls, set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR 2020.

Execpt tiles: Ditto but fixing only flooring tiles any size(vitrified or ceramic set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified in MES SSR 2020 including cutting of tiles as per design.

S/f PVC Pipe 110mm dia laid in trenches/fixed to wall single socketed in any length with rubber ring joint.

Supply and fixing of GI pipe 1/2" dia including in small length for water supply fitting and tubes, light grade with all fitting and fixed complete to walls and ceilings or laid in floors all as specified in MES SSR 2020.

Applying two coat of Apex paint or equivalent with super fine roller coat finish of specialized or equivalent on old surface.

M/L special quality unistone weatherdale tiles or equivalent 200 mmx200mm having stone textured any color on walls set and jointed in neat cement slurry and pointed in white or colored cement to match all as specified.(as per sample available in CB office)

M/L PCC bed 1:5:10 in Cement concrete in foundation filling and mass concrete all as specified in MES SSR 2020.

Rainwater Harvesting : Boring with drill machine (tubewell boring machine) 8” dia with 7” P.V.C. pipe casing of pressure 10 kg/Cm2, Approx depth of bore hole 60' and (02 nos. in one pits of size 4 m x 2.10 m) outer to outer complete with exacavation, PCC bed in foundation 3” thick 1:4:8, brick works sub class ‘A’ bricks 0.345 m x 0.16 m, 0.23 m x 1.20 m all around, plaster in C. mortar 1:4, inside & outside all around, making channel from main nullah/drain to Rain water harvesting pit, filling pits with graded aggregate 40 mm (45 cm), 20 mm aggregate (40 cm), Coarse sand 30 cm complete all as sp. in MES SSR 2020.

Bidder Name

Amount

A N BUILDERS(GSTN-06AADFA9365M1Z2)

Hitech builders(GSTN-NA)

R.D Builders(GSTN-NA)

kulwant singh govt contractor(GSTN-NA)

A N BUILDERS

kulwant singh govt contractor

Hitech builders

R.D Builders

A N BUILDERS

Hitech builders