MOHALLA TEHRA SHEHARI ME RAMASHAREY KE MAKAN SE SONU PANDEY KE MAKAN TAK CC ROAD AND NALI NIRMAN

Class 150 brick work in 1:4 cement and C-sand motar in foundation and plinth including material all labour and T&P ect. Required for proper completion of work. As per DAR (6,11)

12mm thick plaster with cement approved C-sand in 1.4 including supply of all materials labour and T&P etc, required for proper completion of the work (As per SI No 02

Construction of granular sub-base by providing well graded material. spreading in uniform layers with mortar grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Construction of un-rainforced dowel jointed at expansion and construction joint only plain cement concrete payment thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M30 grade course and fine aggregate confirming to IAS 383 maximum size of course aggregates not exceeded 25 mm mixed in a concrete mixture of not less than 0.2 cubic meter capacity and appropriate weight batcher using approved mix design and in approved fixed side formwork(Steel channel, laying and fixing of 125 micron thick polythene film wadges steel plate including levelling the form work as per drawing isnovets rakes compacted using needle is screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construction joint applying debonding Strips primer sealent dowel bars near approaches to bridge/culvert and construction joints admixtures as approved curing of concrete slabs for 14 days during compound where specified and water finishing to lines and grade as per drawing and technical specification

R.C.C. work with cement approved coarse sand & 3cm (3/4") gauge approved stone ballast in propotion 1:1.5:3 in slab excluding supply of rainforcement & its bending the same with 24 B WG binding wire & nescessary centering & shuttering etc, & also including supply of all materials, labour & tools & plants etc required for proper completion of the work strength of the concrete shal not be less then M-150 S.l No. DAR 5.2.2

Reinforcement steel work in RCC [email protected]% of cc including all labour, materials, T&P etc complete as per direction of E/I. AR

Supply & Fixing of stone Granite board size 910x610x20mm with fixing V shape Letters(3'x2'….Etc all comp..

Add 18% GST