8166/GE/SMB/T-10/2026-27 REPAIR REPLACEMENT AND MAINT OF BLDG PANEL BOARDS SERVICE CONNECTIONS MAIN DBs CEILING FANS EXHAUST FANS WALL FANS PADESTAL FANS AND CONNECTED WORKS UNDER AoR OF GE SAMBA

Supply and fixing including Taking out and removing old unserviceable XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 core in trenches,through pipe,under culvert or in air complete all as directed including using existing Cable cushioning and cable protection complete as directed.

Replacement of Earthing complete with GI earth plate 60cmx60cmx6mm thick electrode and 25X4MM GI strip as earthing lead. buried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 5 and incl earth work, PCC pit and RCC cover, watering pipe 20 mm dia light grade, funnel, wire mesh, protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire, charcoal dust and salt etc and connected to earthing test point all as specified or directed and testing complete all as specified. (Earthing for poles for earth continuity wire)

Supply and replacement of MCCB of capacity 100 Amp, 35KA, 4 Pole, 415Volts grade.

Supply, fixing & laying in repair GI pipe light grade 50mm bore in trench, under floor, wall and on pole for cable protection.

Dismantling and taking down old unserviceable rusted meter box complete all as speacied and as directed.

S & F sheet moulded compund(smc) meter box fire retardant type of size not less than 580mmx500mmx250mm,wall thickness 2.5mm (base & lid) to enclouse 04 nos single phase electric meters with hinged type front operated door having transparent acrylic sheet and proper locking arrangement and flush mounting in wall including refixing the serviceable electric meters dismantling and making electrical connections including cleaning of disturbed areas and making good the disturbed surface and matching with existing specifications complete all as specified and directed.Make:-Hensal,Retail,sintex

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series of Make : Schneider ,cat part no: A9HVD04L or equivalent make of L&T/ ABB/Legrand . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

Supply and fixing for MCB SPN 63 amps 240 Volt 'B' series complete all as specified and as directed.

Supply and fixing for MCB SPN 40 amps 240 Volt 'C' series complete all as specified and as directed.

Supply and fixing for MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed.