Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4,720Admitted-Finance KHASRA NUMBER 122 2 PLOT NUMBER 26 HR MILLER BORANADA NATIONAL HIGHWAY 25 BORANADA JODHPUR JODHPUR RAJASTHAN 342012 | JODHPUR | RAJASTHAN | 342012 | ₹4,720 | L1 | Admitted-Finance |
| 2 | Rejected-Technical | - | - | Rejected-Technical attached |
| Sl No | Description | Qty | Unit | HR Miller India Private Limited L1 |
|---|---|---|---|---|
| 1.00 | The product should be in complete knock down structure as much as possible/feasible enabling ease in transportation and assemblies within classrooms.The panels are made from 18 ±0.5mm thk Pre-Laminated MDF ( IS 14587) with 2 mm PVC edge banding (Colour - Same Laninate Match) on all sides.Top Dimension shall be 980 X 355 mm. Top Height shall be 670 mm. Seat Dimension shall be 980 X 300 mm. Seat Height shall be 360 mm. Back dimensions shall be 980 X 200 mm. Size may vary +/- 5mm. The Under structure is Made of ERW tubes[IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096mm thk powder coated 50microns(±10) at base which are welded to the desk and seat supports that are made of MS 'C' sections 29+/-0.3mm X 24.9+/-0.3mm X 1.2+/-0.096mm thick powder coated 50microns (±10). Stiffeners that are provided between the 2 vertical frames at base and back of seat (MDF Board) are made from ERW tubes[IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096 mm thk powder coated 50microns (±10). The tubes are closed with plastic caps. Additional horizontal supports of ERW tubes [IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096 mm thk powder coated 50 microns (±10) are placed Between front legs and between back legs to add the rigidity of the structure. The storage shelves are made from 0.6 ±0.09 mm thk powder coated 50 microns (±10) MS sheet which is affixed below the desk top. Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 6.0 mm dia MS rods powder coated 50 microns (±10) The under structure is assembled using M5 Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame. All Fabricated parts which require welding are MIG / Spot welded. The Screw joining Wooden Panels to under structure are Chip Board Screws. All steel structural components shall be made from virgin material and tested conforming to IS: 513/ IS: 10748/ IS: 2062/ IS: 7138. Recycled steel will not be accepted. Top understructure – 900 mm (W) X 287 mm (D). Back Panel Support – 900mm (W) X 255 mm(H). Seat support – 900mm(W) X 232 mm(D). 3D View is as under:- | 1 | Nos | 4,720 ₹4,720 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Oct 2025, 6:00 pmClosed
DPC SAMAGRA SHIKSHA JODHPUR
INSIDE GGSSS SARDARPURA JODHPUR
DUAL DESK FURNITURE SUPPLY IN 09 SWAMI VIVEKANAND GOVT. SCHOOLS
2025_RCSCE_505654_1
NIT 12/2025-26 SVGMS FURNITURE SUPPLY
Open Tender
Furniture/ Fixture
Item Rate
30 days
SVGMS JODHPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
DPC SAMAGRA SHIKSHA JODHPUR/MD RISL JAIPUR
₹90,000
Yes
31 Oct 2025
7 Oct 2025
17 Oct 2025
7 Oct 2025
16 Oct 2025
7 Oct 2025
Amount
The product should be in complete knock down structure as much as possible/feasible enabling ease in transportation and assemblies within classrooms.The panels are made from 18 ±0.5mm thk Pre-Laminated MDF ( IS 14587) with 2 mm PVC edge banding (Colour - Same Laninate Match) on all sides.Top Dimension shall be 980 X 355 mm. Top Height shall be 670 mm. Seat Dimension shall be 980 X 300 mm. Seat Height shall be 360 mm. Back dimensions shall be 980 X 200 mm. Size may vary +/- 5mm. The Under structure is Made of ERW tubes[IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096mm thk powder coated 50microns(±10) at base which are welded to the desk and seat supports that are made of MS 'C' sections 29+/-0.3mm X 24.9+/-0.3mm X 1.2+/-0.096mm thick powder coated 50microns (±10). Stiffeners that are provided between the 2 vertical frames at base and back of seat (MDF Board) are made from ERW tubes[IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096 mm thk powder coated 50microns (±10). The tubes are closed with plastic caps. Additional horizontal supports of ERW tubes [IS 7138] 25.2 ±0.3mm x 25.2 ±0.3mm x1.2 ±0.096 mm thk powder coated 50 microns (±10) are placed Between front legs and between back legs to add the rigidity of the structure. The storage shelves are made from 0.6 ±0.09 mm thk powder coated 50 microns (±10) MS sheet which is affixed below the desk top. Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 6.0 mm dia MS rods powder coated 50 microns (±10) The under structure is assembled using M5 Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame. All Fabricated parts which require welding are MIG / Spot welded. The Screw joining Wooden Panels to under structure are Chip Board Screws. All steel structural components shall be made from virgin material and tested conforming to IS: 513/ IS: 10748/ IS: 2062/ IS: 7138. Recycled steel will not be accepted. Top understructure – 900 mm (W) X 287 mm (D). Back Panel Support – 900mm (W) X 255 mm(H). Seat support – 900mm(W) X 232 mm(D). 3D View is as under:-
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .