PW3-19574/23GENERAL-THRISSUR CORPORATION 2022-23 EAST ZONE ANNUAL PLAN PRNO.S1490/23-KURYACHIRA OWCPLANT MAINTANANCE AND PAINTING WORKS-General Civil Work

Amount

painting works & ,maintanance

OD345982/2022-2023: Dismantling and seperation for iron rack including all labour charges etc. complete .(1 Rack size 3.70x1.15x 2.55)(Materials 40mmx40mmx6mm angle post 10x2.55mtr,50mmx50mm HST 5x2.55,25mmx25mmx6mm angle bar 3x3.70and cross bar 5x1.15,12mm sqare bar 2x3.70bottom plate 8mm thick 15x0.10x0.10)

OD345984/2022-2023:Dipartmental material structural steel work welded in iron racks including cutting hoisting ,welding including all welding rode and all labour charges etc. complete .(1 Rack size 3.70x1.15x 2.55)(Materials 40mmx40mmx6mm angle post 10x2.55mtr,50mmx50mm HST 5x2.55,25mmx25mmx6mm angle bar 3x3.70and cross bar 5x1.15,12mm sqare bar 2x3.70bottom plate 8mm thick 15x0.10x0.10)

OD346056/2022-2023:Waste cleaning owc plant out side including labour charge

OD347179/2022-2023:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 320mm Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap

OD352762/2022-2023:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 160 m dia 4 Kgf/cm2 - External work - Exposed on wall

OD359775/2022-2023:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 90 m dia 4 Kgf/cm2 - External work - Exposed on wall

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

OD362783/2022-2023:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. Details of cost for 216.14sqm (External dimension of plinth) Area of roof 20.2x10.70m=216.14sqm Sheets Used = 20Nos x 10.70m x 1.06m = 226.84sqm add 3% wastage = 6.81 Total = 233.65sqm

17.25.5:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 450x300 mm

10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

OD338321/2022-2023: Removing rust by scrapping and sand papering and preparing the surface smooth for iron rack including necessary repairs to grills

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall

DONSON N.A

Bidder Name

DONSON N.A

P.O.JAMES