Special Repairs to Barrack (G+2) at Dwarka. Dist- Dev-Bhumi Dwarka (Including Electrification) (SBD) (6th Attempt)

No Rate Rs. in words Amount Rs.

(A) CIVIL WORK:

Dismantling existing plaster racking out joints and cleaning the surface for plaster at all

heights including disposal of rubbish to the dumping ground within of any lead & Lift. Rupees Ninteen and Paisa

Sixty Nine Only

Dismantling Sanittary fitting like wash basin, W.C. pan indian and europion type, Rupees Four Hundred Ten

2 flushing tank etc. including staking the material with all lead and lift. 30.00 No. 410.13

and Paisa Thirteen Only

Dismantling tiles or stone floors laid on mortar including stacking of serviceable

Rupees Fourty Eight and

3 materials and disposal of unserviceable materials with all lead and lift.disposal of 749.00 Sqm 48.63

Paisa Sixty Three Only

rubbish to the dumping ground within of any lead and Lift.

Excavation for foundation upto 1.5 M. depth incluing sorting out and stacking of useful

Rupees One Hundred Fifty

materials and disposing of the excavated stuff of any lead & Lift. [B] Dense or Hard Soil.

4 8.00 Cum 155.77 Five and Paisa Seventy Seven

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful Rupees Two Hundred Sixty

5 materials and disposing of the excavated stuff of any lead & Lift. (C) Hard Murrum. 11.00 Cum 264.44 Four and Paisa Fourty Four

Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 M/C stone

aggregates 40mm nominal size) and curing complete excluding cost of form work in Rupees Two Thousand Seven

6 Foundation and Plinth. 5.00 Cum 2742.27 Hundred Fourty Two and

Paisa Twenty Seven Only

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4- Rupees Three Hundred

7 M/Cstone aggregate 20mm nominal size) laid in one layer and finished with a floating 22.00 Sqm 335.72 Thirty Five and Paisa

coat of neat cement. (B) 50mm thick. Seventy Two Only

Providing and fixing Urinal of approved quality connecting the urinal with waste pipe, Rupees One Thousand Sixty

8 trap etc. complete white earthen ware flat black or corner type size 430mm x 260mm x 9.00 Nos 1064.22 Four and Paisa Twenty Two

350mm. Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and applying Crackfilling material in existing RCC members by Sika dur-31 or

its equivalent as approved by engineer in charge. Rates are inclusive of preparing the

surface by cleaning, making groove in RCC member, applying Sika Rust off 100 in Rupees One Hundred Fifty

9 existing reinforcement if visible, mixing components of chemicals in slow speed electric 44.00 Rmt. 156.75 Six and Paisa Seventy Five

drill them apply mixed Sika dur-31 to the opened crack with a trowel, spatula or by Only

glove-protected hand.

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of Rupees Two Hundred Six

10 following dia. Nominal bore tube fitting and clamps including making good the 34.00 Rmt. 206.73 and Paisa Seventy Three

wall,ceiling and floor etc. complete. (B)20mm inside dia. Only

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of Rupees Two Hundred Fifty

11 following dia. Nominal bore tube fitting and clamps including making good the 72.00 Rmt. 251.31 One and Paisa Thirty One

wall,ceiling and floor etc. complete.(C) 25mm inside dia. Only

Providing & fixing concealed center point to wall ceiling & floor CPVC pipes (SDR-

13.5)PIPE having National Sanitation Foundation ( NSF ) seal for potable water of Rupees Three Hundred

12 following dia. Nominal bore tube fitting and clamps including making good the 59.00 Rmt. 334.89 Thirty Four and Paisa Eighty

wall,ceiling and floor etc. complete.(D) 32mm inside dia. Nine Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Rupees Two Hundred Nine

including finishing with floating coat of neat cement slurry at GROUND FLOOR. and Paisa Thirty Eight Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Rupees Two Hundred Thirty

14 including finishing with floating coat of neat cement slurry at FIRST FLOOR. 78.00 Sqm 237.85 Seven and Paisa Eighty Five

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Rupees Two Hundred Sixty

15 including finishing with floating coat of neat cement slurry at SECOND FLOOR. 78.00 Sqm 266.32 Six and Paisa Thirty Two

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Rupees Two Hundred Ninety

16 including finishing with floating coat of neat cement slurry at THIRD FLOOR. 73.00 Sqm 294.79 Four and Paisa Seventy Nine

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick Rupees Three Hundred

17 finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height(Gutka 594.00 Sqm 312.56 Twelve and Paisa Fifty Six

Plaster). Only

Provinding CEMENT VATA ( 10cm x 10cm )size quarter round in cement mortar 1 : 1 Rupees Twenty Four and

18 including neat cement finishing, watering etc. Complete. 96.00 Rmt 24.04

Paisa Four Only

Providing and laying acrylic base ( zycosil) equvivalant water proofing paint in two

coats to vertical and horizontal surface of depressed portion of bath and W.C. as directed Rupees One Hundred Ten

19 by engineer -in- charge. This treatement shall be carried out over and above water 134.00 Sqm 110.70

and Paisa Seventy Only

proofing cement plaster

Providing 10mm thick cement plaster in single coat of interior plastering and

finished even and smooth in cement mortar 1:3 (1 cement; 3 sand) and finishing with a

floating coat of neat cement slurry including providing and mixing I.S.I. make water Rupees One Hundred Ninty

proofing material in cement mortar in proportion recommended by the manufacturer One and Paisa Ninty Only

for ALL FLOORS.

Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN DOOR shutter with

Frame made from co-extruded three- layer rigid PVC foam sheet (single Extruded) with

density not less than 600 kg/cbm outer layer 1 mm thick should be of rigid PVC with Rupees Four Thousand Five

21 density of not less than 1400 kg/cbm manufactured by an ISO 9001-2015 certified 46.00 Sqm. 4501.96 Hundred One and Paisa

company. Complete as per direction of Engineer-in-charge, manufacturer’s specification Ninty Six Only

& drawing.

Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x

38.10mm x 1.2mm (Jindal Section :20033,@Wt.0.593 kg per mt) with colour anodized Rupees One Thousand One

22 alluminium frame for ventilation with 5mm thick transparent bronze colour tinted float 8.00 Sqm. 1163.92 Hundred Sixty Three and

glass as details etc complete for VENTILATION. Paisa Ninety Two Only

Providing and fixing U.PVC/SWR Nahni Trap of the following nominal dia self cleaning

design with top tile and strainer including cost of cutting and making good the wall and Rupees Five Hundred Eighty

23 floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali. 18.00 No. 580.47

and Paisa Fourty Seven Only

Provinding and fixing S.W. Gully trap without C.I. grating brick masonry chamber & Rupees One Thousand One

24 water tight C.I.cover frame of 300mm x 300mm size (inside) with standard weight (I) 4.00 No. 1176.94 Hundred Seventy Six and

square mouth trap 150mm x 100mm size of 'P' or 'S' type. Paisa Ninety Four Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing & Fixing to Wall Ceilling and Floor SWR Rain water pipe as Per IS-13592 of

90mm Dia Complete with Special flings, Compressor type Fittings, Wall clips on wooden

patty including making good the ceiling and floor on terrace rain water pipe shall be 90 Rupees Three Hundred

25 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by 88.00 Rmt. 323.15 Twenty Three and Paisa

Ground level rate are Inclusive of all Necessary Fittings G.I.Slotted Z Patti (minimum Fifteen Only

1.6mm thick) with minimum 6mm dia etc required.

Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring

of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition &, Pipe fixing Rupees Two Hundred Sixty

26 with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical 116.00 Rmt. 264.97 Four and Paisa Ninety Seven

Drain pipe, etc.complete and making good the wall ceiling and floor. (A) 75mm dia Only

Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste pipe with ' O ' Ring

110 mm dia. of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition &

Rupees Four Hundred Ninety

Pipe fixing with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for

27 71.00 Rmt. 495.91 Five and Paisa Ninety One

Vertical Drain pipe, etc.complete and making good the wall ceiling and floor. (B)

Providing and fixing in position PVC COWL VENT to pipes. 75mm dia Rupees Sixteen and Paisa

Fourty Seven Only

Providing and fixing in position PVC COWL VENT to pipes. 110mm dia Rupees Twenty Eight and

Paisa Sixteen Only

Providing and laying 25mm thick Double Pre polished ( Dimond Policed) POLISHED

KOTAH STONE FLOORING over 20mm average thick base of cement mortar 1:6(1 Rupees One Thousand One

30 cement; 6 coarse sand) over and jointed with grey cement slurry including rubbing and 49.00 Sqm 1102.90 Hundred Two and Paisa

polishing etc. complete for All floors. Ninty Only

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

orfixing on existing flooring by adhesive including dismentaling of existing flooring and

Rupees One Thousand Four

material jointed with color cement slurry including finised with flush pointing &

31 96.00 Sqm. 1461.92 Hundred Sixty One and Paisa

cleaning the surface etc.Completed for Antiskit Brand of the tiles shall be as per

Ninety Two Only

approved make list of GSPHCL. Shade & Size 600 x 600 mm of tiles shall be as specified

in tender item.

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of

steps and DADO on 8mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed Rupees One Thousand Four

32 with white cement slurry.Size 300mm X 600mm(Brand of the tiles shall be as per 200.00 Sqm. 1473.50 Hundred Seventy Three and

approved make list of GSPHCL.) Paisa Fifty Only

Scrubbing of old paint and Painting two coats on previously painted steel and other

metal surface with enamel paint with one coat of zinc yellow primer, brushing to give an Rupees Ninety Eight and

33 even shade including cleaning the surface of all dirt, dust and other foreign matter. 131.00 Sqm 98.93

Paisa Ninety Three Only

Scrubbing of old paint and Painting two coats on previously painted wood surface with

enamel paint, with one coat of Wooden Base Primer brushing to give an even shade Rupees One Hundred

34 including cleaning the surface of all dirt, dust and other foreign matter. 473.00 Sqm 114.24 Fourteen and Paisa Twenty

Providing and fixing 15mm ONE WAY BIB TAP. Rate Are Inclusive Of All Matarial

labour & Necessary Fitting Etc. Complete As Per Detailed Drawings, Specification And As Rupees Nine Hundred Ninety

35 Per the Instruction Of Engineer In charge. The Model & Makes Of ONE WAY BIB TAP 30.00 No. 990.61

and Paisa Sixty One Only

Shall Be As Per The Approved Makes List Of GSPHCL.

Providing and supplying of DWC HDPE Pipe class SN8 structured wall polythene piping

system (Pipe with online/offline coupler and elastometric sealing ring) with non-

smooth external Annular corrugated and smooth internal surfaces (Double wall) for non

Pressure underground sewerage & Drainage application as per EN 13476-3 includind all

local and central taxes,transportation, freight charges, octrol, inspection charges,

loading, unloading, convetance to the departmental stores etc. complete. (100mm ID

dia) Including lowering, laying and jointing of class SN8 structured wall. ( External

Annular corrugated & smooth internal Surface) polyethylene piping and fittings with

the help of coupler (Online/offline) attached with one end pipes, sliding over the Rupees Two Hundred

elastometric sealing rubber ring placed on the specified valleu of the corrugation at the Twenty Nine Only

spigot end, lowering the same into the trench, laying on the lower bedding (construction

at bottom of trenches) at prescribed gradient depth & alignment testing the water

tightness of the joints, ensuring the continuity tests of specified pipe segment etc.

complete as per drawing, specification & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction of engineer-in-

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and supplying of DWC HDPE Pipe class SN8 structured wall polythene piping

system (Pipe with online/offline coupler and elastometric sealing ring) with non-

smooth external Annular corrugated and smooth internal surfaces (Double wall) for non

Pressure underground sewerage & Drainage application as per EN 13476-3 includind all

local and central taxes,transportation, freight charges, octrol, inspection charges,

loading, unloading, convetance to the departmental stores etc. complete. (150mm ID

dia) Including lowering, laying and jointing of class SN8 structured wall. ( External

Annular corrugated & smooth internal Surface) polyethylene piping and fittings with

the help of coupler (Online/offline) attached with one end pipes, sliding over the Rupees Three Hundred

elastometric sealing rubber ring placed on the specified valleu of the corrugation at the Ninety Six Only

spigot end, lowering the same into the trench, laying on the lower bedding (construction

at bottom of trenches) at prescribed gradient depth & alignment testing the water

tightness of the joints, ensuring the continuity tests of specified pipe segment etc.

complete as per drawing, specification & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction of engineer-in-

Constructing brick masnory chamber for under ground C.I.Inspection chamber and

bends with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement mortar

1:5,RCC top slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia. steel @ 15 c/c

and R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm

nominal size) foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth Rupees Four Thousand Two

38 with a floating coat of neat cement on walls & bed concrete etc. complete. Rate are also 8.00 Nos 4256.18 Hundred Fifty Six and Paisa

inclusive of outside plaster 15mm thick in C.M 1:3 from top of chamber and all side upto Eighteen Only

45cm deep below ground level (I) inside dimensions 455mm x 610mm and 450mm

deep for Single or multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD

10 ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary fittings

Extra over above item for every additional depth of 0.1mtr. or part thereof beyond Rupees Two Hundred Thirty

39 450mm depth for brick masonry chamber. 16.00 Nos 239.99 Nine and Paisa Ninety Nine

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Constructing brick masnory chamber for under ground C.I.Inspection chamber and

bends with block having crushing strength not less than 50 Kg/Sq.cm.in cement mortar

1:5, RCC top slab with 1:1.5:3 mix (1-cement,1.5-coarse sand,3-graded stone aggregates

20mm nominal size) with 8mm dia steel at 15cm c/c and providing and fixing precast

RCC cover with M.S. handel. (frame 40 X 40 X 5mm Size ). Foundation concrete1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat Rupees Six Thousand

40 of neat cement on walls and bed concrete etc.complete. Rate are also inclusive of 3.00 Nos 6023.43 Twenty Three and Paisa

outside plaster 15mm thick in C.M 1:3 from top of chamber and all side upto 45cm deep Fourty Three Only

below ground level (ii) inside dimensions 600mm x 850mm and 450mm deep for multi

purpose pipe line.Rate Also Inclusive RCC Frame with cover MD 10 ton (Rubber mould

Finish) Inner Size 600 x 850mm with all necessary fittings

Extra over above item for every additional depth of 0.1mtr. or part thereof beyond Rupees Three Hundred

41 450mm depth for brick masonry chamber. 6.00 Nos 322.37 Twenty Two and Paisa Thirty

Seven Only

Providing and fixing precast R.C.C. cover including angle frame of 40mm x 40mm x 3mm

section and C.C.1:1.5:3 precast I.C.cover for chamber etc. including 8mm dia. H.Y.S.D.

steel at 15cm c/c both way and oil painting of angle frame and finishing of concrete with

C.M.1:3 etc. complete. Finished dimension of cover shall be 0.60 x 0.45 x 0.07 mt size. Rupees One Thousand Seven

Rate are inclusive of cost of angle frame reinforcement concrete finished work and two Hundred Two Only

pieces of M.S. flat 25 x 3mm size as a handle.

Providing and fixing 600mm x 450mm bevelled edge Mirror or superior glass mounted

on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass Rupees Eight Hundred Fifty

screw and washers. and Paisa Ninety Only

Providing and fixing water closet squatting pan (Orissa type W.C. pan) first quality with

UPVC S trap of 100 mm including jointing the trap with UPVC Pipe (size 580mm X

Rupees One Thousand Two

44 mm in vitreous china white colour).Rate also includes making holes in RCC slab / Beam 12.00 No 1207.07

Hundred Seven and Paisa

and fixing the trap in hanging position by M.S. clamps of required size fitted in ceiling

Seven Only

Providing and fixing chromium plated brass half turn flush cock of approved quality

including fixing in pipe line etc. complete of 25mm dia. Rupees Two Hundred Sixty

One and Paisa Sixteen Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and fixing wash basin with single hole for pillar tap with C.I or M.S. brackets

painted white including cutting holes and making good the same including fitting (A)

Vitreous china : (II) Flat back Wash basin 550mm x 400mm size in white colour Rupees Three Thousand

46 including providing and fixing C.P. Brass waste coupling 32 mm dia and C.P. brass pillar 18.00 No 3935.33 Nine Hundred Thirty Five

tap capstan head of 15 mm dia. with complete including PVC connection pipe from stop and Paisa Thirty Three Only

cock to piller tap and 32 mm CP brass bottle trap.

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE

40 mm dia. Rupees Six Hundred Fifty Six

and Paisa Eighty Six Only

Providing & Laying integrated cement based proprietary water proofing treatment of

required thickness over the roof including 10mm thick water proofing cement plaster in

cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the surface with

white cement slurry and slopping out terrace slab with following specification laid to

required slope not flatter than 1:80 (the thickness of water proofing treatment near rain

water outlet or the lowest point of the finished slope shall not be less than 45mm Rupees Eight Hundred Ten

including treating the vertical surface of the parapet wall upto 20cms. height above and Paisa Sixty Only

finished level of terracing including finishing top with joint less water proofing plaster,

curing, testing etc. completed. Rate is including 10 years performance of guarantee bond

to be given on stamp paper (No extra shall be paid for increase in thickness for proper

Applying and grouting a slurry coat of neat cement using 2.75 kg/Sqmt. of cement

admixed with proprietary water proofing compound conforming to IS-2645 over the

RCC slab including cleaning the surface before treatments.

Laying cement concrete using broken bricks bats 25mm to 40mm size with 50% of

cement mortar 1:4 (1cement : 4 coarse sand) over 10mm thick water proofing cement

plaster in cement mortar of mix 1:3 (1cement : 3 coarse sand) admixed with proprietary

water proofing compound confirming to IS-2645 to required slope and treating

similarly the adjoining walls upto 200mm height including rounding of junction of walls.

After two days of proper curing applying a second coat of cement slurry.

Finishing the surface with china mosaic pieces laid in 10mm thick joint less cement

mortar of mix 1:3 (1cement : 3 coarse sand) admixed with proprietary water proofing

compound confirming to IS-2645 and finally finishing the surface with trowel with neat

cement slurry.

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test. All above operation to be done in order and as directed

and specified by the engineer in charge.

All above operation to be done in order and as directed and specified by the Engineer In

Distempering (three coats) with oil bound washable distemper of approved brand &

manufacturer & of required shade on ceiling and sloping surfaces to give an even shade,

over & including a primary coat with alkali resistance primer of approved brand after Rupees One Hundred

49 thoroughly brushing the surface free from mortar dropping & other foreign matter & 1379.00 Sqm 115.12 Fifteen and Paisa Twelve

also scrubbing of old paint including preparing the surface even & smooth by white Only

cement base putty finishing.

Distempering (three coats) with oil bound washable distemper of approved brand &

manufacturer & of required shade on wall surfaces to give an even shade, over &

including a primary coat with alkali resistance primer of approved brand after Rupees One Hundred Six and

50 thoroughly brushing the surface free from mortar dropping & other foreign matter & 2502.00 Sqm 106.85

Paisa Eighty Five Only

also scrubbing of old paint including preparing the surface even & smooth by white

cement base putty finishing.

Scrubbing of old paint and Finishing wall with Weather proof exterior emulsion paint on

wall surface (Two Coat) over and above applying one coat of primer to give an required

shape even shade after throughly Brushing This surface to remove all Dirt and remains Rupees One Hundred Fifty

51 of loose poweder material etc. complete. Primer shall be exterior weather coat and 1305.00 Sqm 153.35 Three and Paisa Thirty Five

Paint shall be Appex Weather Emulsion Only Paint and primer shall be as per approved Only

make list of GSPHCL

Credit Vaule for fully pannelled shutter and removed from site and clean site.

52 49.00 Sqm -200.00 Rupees Two Hundred Only -9800.00

Total Amount (A) =

Total Amount (A) =

ELECTRICAL

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 1.5 mm2

copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC insulated wire for

earth continuity in 20/25/32 white Colour rigid PVC pips ISI marked and FIA approved

medium class and 20/25/32 mm. dia. With PVC fitting fixed with adhesive solution

complete with 6 A Modular type switch / bell push & accessories and earth continuity to

be erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Three Hundred

53A 145.00 Point 396.00

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe Ninety Six Only

erected, with necessary Lamp holder/ceiling rose / H.D.Connector (make & model

approved by EIC and matching colur with switches accessories) as directed.(Conductor

resistance should be as per IS:8130/1984)

[Length of point wiring must not increase than 10 mtr. For that necessary switch board

and their location must be finalised before execution by agency otherwise payment will

not be done for extra long point. For future extention, if required, agency has to erect

one higher size box as per instruction of EIC]. For Open Wiring (a) Light point Cat-II

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step Rupees Five Hundred

53B type Electronic fan regulator both having ISI mark) Cat-II 50.00 Point 574.00

Seventy Four Only

For Separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat II Rupees Four Hundred

53C 25.00 Point 426.00

Twenty Six Only

For Loop on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Rupees Two Hundred

53D Cat II 80.00 Point 219.00

Nineteen Only

Providing and erecting Medium Class FIA approved and ISI mark white colour

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling

54A 180.00 Mtr. 23.00 Rupees Twenty Three Only

along with continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia. (a) 20 mm. dia.

54B 25 mm dia. 50.00 Mtr. 32.00 Rupees Thirty Two Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with

FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall / ceiling complete with FRLS

55A PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. 500.00 Mtr. 59.00 Rupees Fifty Nine Only

FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code. [conductor resistance

should be as per IS:8130/1984]

2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour code. [conductor Rupees One Hundred Thirty

resistance should be as per IS:8130/1984] Nine Only

Providing & fixing 20mm. dia. PVC insulated G.I. corrugated Flexible pipe with

Rupees Thirty and Paisa

56 necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. 100.00 Mtr. 30.95

Ninety Five Only

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make

x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC

insulated FRLS wire for earth continuity in FIA approved ISI mark white colour medium

class 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected on wall / slab along with continuous G.I. fish wire to draw wires and

laid in approved manner and complete with 16 Amp. Modular type Swich and

accessories mounted in 20 G. G.I.company fabricated metallic / PVC / Acrylic box Rupees Six Hundred Thirty

57 covered with appropriate front plate modules erected on the wall. For Open wiring (a) 35.00 Each 639.00

16 Amp. Indicator switch & 1 No. 6/16 A universal socket white colour suitable for

pin top duly both having ISI mark. Cat.-II (Necessary sheet / tape / polythene / sand

must be erected or filled in all box To Prevent Mortor Going In To The Box) [conductor

resistance should be as per IS:8130/1984]

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing & Erecting 2.0 mtr. long Earthing system by making minimum bore of

mm dia. in soft soil. Suitable for doing pipe-in-pipe technology earthing. Earthing

electric rod must be made from Corrosion free hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI mark of

Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand. Terminal Size: 70 mm X 100 mm length, Terminal should be made from inner

pipe for that pipe must be pressed and gave rectangular shape so its work as a terminal.

The hot deep galvanising must be done after above process. Galvanised thickness must

be minimum 75 micron anywhere. SS Nut bolt:- 2 nos. with washer suitable for 14 mm

dia. hole must be provided at terminal. Total minimum Weight (approx.) of earth Rupees Seven Thousand

electrode with inside conductive material be 26 kg. Twenty Five Only

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for

long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

400 mm depth and Cover should be heavy duty cast iron with required size of

mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has

to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least 02 ohms

& voltage between neutral & Earthing upto 02 volt. Agency has to maintain earthing &

its value for one year. Earthing must be done in the presence of A.E. (GSPHCL)]

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

For above earthing additional charges for boring in hard rock soil (by breaker) & filling

soft soil in earth pit (certificate for soil have to given by DEE / AE along with Rupees Two Hundred

photographs) Seventy Six Only

Providing and erecting following type of Modular Type Accessories mounted with

G company fabricated metalic box, single mounting base frame covered with textured /

60 metallic front plate, modules erected with necessary connection. As desired by Engineer 150.00 Each 15.00 Rupees Fifteen Only

in charge. Blank Plate Single, Cat.-II

Supplying and Eracting LED indoor fitting of approximately 4 Feet long with LED of

Wattage 0.2 W to 0.5 W assemble on single MCPCB with housing use as a hint sink

shall be made from aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following specification: (A) Company

mark/name on the fitting, (B) Rated input voltage and frequency : 220V to 240 VAC ;

50Hz , (C) Rated input wattage: 24W, (D) Rated input Current 0.2 A, (E) Power Factor :

Min. 0.90, (F) ATHD : Max. 15%, (G) Rated Luminous flux : 2420 lm, (H) CCT : 6500K , (I)

CRI : Min. 80Ra, (J) LED life span : Min.5000 Hrs @ L70, (K) Driver Efficiency : Min. 80%,

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs, (M) Surge Protection : Rupees Three Hundred

Min. 2KV, (N) IP Rating : IP20, (O) IK Rating : IK02, (P) Short circuit, Open Circuit & Seventy Only

Reverse Polarity Protection must be provided, (Q) Fixing clamp design & strength

should be sufficient to hold the fitting eracted on wall or ceiling, (R) 3 Core copper wire

of appropriate size with earthing connector. (Note:- The manufacturer/authorized

Channel partner of the manufacturer has to submit 5 Yrs free replacement Guarantee

for complete Fixture) [Approval will be given strictly subject to item specification]

Supplying and erecting 3 W LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,

62 Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 12.00 Each 69.00 Rupees Sixty Nine Only

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder Cat III

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, Rupees One Hundred

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder Cat III Eleven Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and erecting Polycarbonate body surface mounting LED Bulk head type

watt Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And

lumen output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool Rupees Seven Hundred

64 white (3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg 3.00 Each 780.00

Eighty Only

C working temperature, AL frame with Beam Angle 120 deg.

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm,

(2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption:

maximum 53W, (5) RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two, (9) Total Body:

Top & Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: 1.5 MFD Aluminium body premium quality, Branded make, (14) Down road: Rupees One Thousand Nine

up to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16) 3 core Hundred Twenty Nine Only

0.50 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to

mechanical parts. (Agency has to erect safey wire with ceiling fan and checked with EIC)

(OEM has to approved model as per tender specification and tested at ERDA) (Necessary

test reports should be submitted strictly at the time of approval. Sample approved by

EIC subject to above specification only)

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with

66 Making the site as original. 50.00 Each 43.00 Rupees Fourty Three Only

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS

sheet dust & vermin proof having hinged door with rubber gasket and necessary busbar

supports with copper busbar having current density not more than 1.6 amp/sqmm

(Rated current per Cross Section area) duly wired with colour insulating tape for phase

sequence, three phase & neutral Each equal & one meter long suitable for following Rupees Four Thousand

67 current capacity with necessary painting mounted on wall or pedestal frame of required 1.00 Mtr. 4378.00 Three Hundred Seventy

size with necessary incoming and outgoing connections with proper size of copper Eight Only

strip/wire with lugs as directed. Suitable for 100 Amp. capacity [make and model

approved by EIC strictly as per tender specification]

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing ad erecting approved make single phase Double Door metal clad D.B. as

per relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company

fabricated sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB Door, Back side and Body of

MCBDB must be made of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1)

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Rupees Five Thousand Five

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with Hundred Thirty Six Only

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire

box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

MCBDB door, backside body of MCBDB must be made of 1.20 mm CRCA sheet.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB:

Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988

having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double

pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P.

MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:-

4 Nos., 16 Amp:- 4 Nos. & 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size given by EIC on

site as per requirement]

Providing and Erecting Approved make ISI mark ELCB confirming to IS:12640/1988

having serial number printed on it and having sensitivity of 30 mA and breaking

capacity of 10 KA and suitable for 240 V, 50 Hz having characteristic of quick acting & Rupees Two Thousand Two

69 Tripping with all advance feature & do not incorporate any electronic component 1.00 Each 2213.00

Hundred Thirteen Only

(mounted in MCBDB) Suitable for operation on single phase 240 Volt max rating of (i)

For 40 Amp. DP.

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing & erecting 240 V MCB Double pole switch for motor & inductive load (C

Curve) having 10 KA breaking capacity & confirms to IS:8828 with same company metal Rupees Five Hundred Two

70 box with earthing terminal having following capacity with necessary Qtr. numbering / 7.00 Each 502.00

marking with oil Paint by painter. For 40 Amp. DP

Providing & erecting 415 V MCB Four Pole Switch for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having Rupees Seven Hundred

following capacity [c] 63 Amp. FP Thirty Only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet

steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing

terminals for following type of RCCB, RCCB + MCB with necessary numbering / marking Rupees Two Hundred

72A 2.00 Each 272.00

with oil Paint by painter. [a] For 2 pole [Box must be of same company as MCB, ELCB Seventy Two Only

For 4 pole [Box must be of same company as MCB, ELCB used] Rupees Four Hundred Fourty

72B 1.00 Each 442.00

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on

existing min. 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP

/ MCB SWITCH and energy meter (contractor shall make approved drawing of Bakelite Rupees Two Thousand Two

73 1.50 Sq. Mtr. 2289.00

sheet To arrange required No. of Energy meter & ICDP / MCB switch -busbar etc. as per Hundred Eighty Nine Only

Actual space available in electrical room at site)

Providing, erecting, Fabricating the M.S. structure as per requirement of site as per

structure design Including proper size approved by EIC of M.S. angles, flats, bars,

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium quality

74 oil paint and true care red oxide metal primer,asian paint make with erection on site as 50.00 Kg 77.00 Rupees Seventy Seven Only

per direction of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

Providing and erecting metalic danger notice board for MEDIUM VOLTAGE

75 installation to be erected as per I.S. 2.00 Each 69.00 Rupees Sixty Nine Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

76A power switchgears, motor starters & control wiring) with required size of copper lugs, 50.00 Mtr. 53.00 Rupees Fifty Three Only

nuts and bolts if required. For One wire 6.00 sq. mm.

One wire 16.00 sq. mm Rupees One Hundred Thirty

Supplying and erecting Fabricating terminal box for street light pole made from

SWG M.S. sheet having following size complete with fixing arrangement for terminal

board, with necessary hole for wire entry and exit from the box. The box shall be

provided with cover and hinges on one side and bolting at other end The box shall be

fixed by clamps fabricated from 25mm x 6mm flat.The box shall be painted with one Rupees Seven Hundred Two

77 coat of red oxide and two coats of paint having following box size 330 mm x 260 mm x 6.00 Each 702.00

140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted

with one coat of red lead paint.

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for

terrace as per instruction of EIC or wall bracket as per instruction of EIC having nuts

and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with

suitable rise as per site condition and suitable welded stiffner reducer and nipple with Rupees Four Hundred Eighty

check nut complete painted with one coat of yellow zinc and two coats of alluminium Seven Only

paint for Single arm bracket suitable for pole or terrace as per design given by EIC (a)

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test certificate to be submitted)

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light

Luminaire with total consumption of Max. 90 W with single piece die cast aluminium

housing, high power LED shall be mounted on high quality metal core PCB with

extremely precison designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module min.

130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality driver for protection Rupees Six Thousand One

against high and low Voltage cut Off, opertional for high amibient and high humid Hundred Seventeen Only

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range Voltage 160 to 270 V,

system efficiency >= 110 lm/w, and total lumens not less then 9900, CCT > 5000K, CRI >

65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

The Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to

the above product should be operational in the temperature range of 0 deg to 50 deg

and humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs free replcement Guarantee for complete

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable for

1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy

Rupees Two Hundred Sixty

80 guage 1.0 mm thick cable clamp or in existing DWC pipe underground or road crossing 150.00 Mtr. 267.00

Seven Only

or floor. For 4 core x 2.5 sq.mm Copper Armourd cable with all require accessories

Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI

81 marked copper wires of following size to be erected as directed. 3 core x 1.5 sq.mm. 50.00 Mtr. 44.00 Rupees Fourty Four Only

PVC insulated round copper wire ISI mark.

Providing & Erecting Universal Astro 5 KVA intelligent streetlight control system Rupees Twelve Thousand

82 insu with weather proof box for outdoor application. (As per specification attached 1.00 Each 12895.00 Eight Hundred Ninety Five

separately) (Make and model approved by EIC) Only

It. Total

Description of Item Quantit Unit

No Rate Rs. in words Amount Rs.

Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all

83 types along with accessories etc. complete and handed over to dept. 400.00 Point 1.00 Rupees One Only

Dismantling the existing switchgears, DB and Busbar of any size complete with /

84 without board or angle iron frame. 10.00 Each 7.00 Rupees Seven Only

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete

85 with accessories, G.I. down rod, frame etc. and making the site clear. 50.00 Each 9.00 Rupees Nine Only

Total Amount (B) =

Total Amount (B) =

Total Amount (A+B) =

Total Amount (A+B) =

Dy. Ex. Engineer I/C Executive Engineer

G.S.P.C.H.Ltd. G.P.H.C.Ltd.

JamKhambnhalia Rajkot

Signature of the contractor.