REPAIRS TO ROOF TREATMENT ROOF SHEET TRUSSES FALSE CEILING SUNKEN FLOORS REPAIR TO FLOORINGS AND CLEANING OF SEWAGE LINES SEPTIC TANK MANHOLES AND TANK CLEANING AND IN IU MMT INS VIRBAHU AND SATAVAHANA

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing excavated spoil to a distance exceeding 1.50KM but not exceeding 5.0KM and depositing where directed at a level n. exc 1.5 m above the starting point all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even with out using extra cement complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth complete all as specified and as directed.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Clearing jungle including uprooting of vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared complete all as specified and as directed.

Demolition of Concrete in any floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in surface channels, drains complete all as specified and as directed.

Plain Cement Concrete (1:2:4) Type B-1 (using 20 mm graded brocken stone aggregate) as in copings, haunching on top of drain and the like including necessary moulds and form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 50 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc. complete as specified and as directed.

Cleaning of Manholes, inner area upto 1.00 sqm and depth upto 1.00 m, by pumping out the sewage waste completely removing the sludge and other materials from the manholes by suitable means and removing all the materials obtained from the manholes out side MD land and cleaning the complete area including making good any damages to the manholes complete all as required and as directed by Engineer in charge.

Cleaning of Manholes inner area upto 1.00 sqm and depth upto 3.00 m, by pumping out the sewage waste completely removing the sludge and other materials from the manholes by suitable means and removing all the materials obtained from the manholes out side MD land and cleaning the complete area including making good any damages to the manholes complete all as required and as directed.

Demolition and breaking up drain pipes of SWG/PVC pipes set in cement mortar upto150 mm dia of pipe complete all as required and as directed.

Demolition and breaking up drain pipes of SWG pipes set in cement mortar for 200 mm dia of pipe complete all as required and as directed.

PCC type C-2, 1:3:6 (Using 40mm grded granite stone aggregate ) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 150 mm dia of pipes complete all as required and as directed.

PCC type C-2, 1:3:6 (Using 40mm grded granite stone aggregate ) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid tested for pipes of 200 mm dia of pipes complete all as required and as directed.

150 mm bore Salt Glazed stone ware drain pipes of grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

200 mm bore Salt Glazed stone ware drain pipes of grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Precast reinforced cement concrete 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes, drains etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Clearing the blockage in the 150 mm bore sewage line completely, preferably by mechanical means, to enable the sewage to flow freely to the next manholes, removal of sludge and other materials obtained from the sewage line to outside MD land in sealed containers and clearing the complete area including making good any damages to the line or manholes complete all as required and as directed.

Clearing the blockage in the 200 mm bore sewage line completely, preferably by mechanical means, to enable the sewage to flow freely to the next manholes, removal of sludge and other materials obtained from the sewage line to outside MD land in sealed containers and clearing the complete area including making good any damages to the line or manholes complete all as required and as directed.

Cleaning of Septic tanks by pumping out the sewage water completely removing the sludge and other materials by suitable means and removing all the materials obtained to out side MD land and cleaning the complete area including making good any damages complete all as required and as directed. Note : Depth of sludge shall only be measured for volume.

Cleaning the blockage in the Gully Trap / floor trap / nahani trap completely to enable the the sewage to flow freely to the next manholes by suitable means and removing all the materials obtained to out side MD land and cleaning the complete area including making good any damages to the manholes complete all as required and as directed.

Cutting holes through brick work/RCC built in CM and making good in cement mortar 1:3 of RCC 1:2:4 Type B1 as required superficial area exc. 400 sqcm but not exc. 0.1 SqM complete all as specified and as directed.

Removing silt, grit , mud and other materials from covered drain in foul condition including removing materials from the site to out side MD land and clearing the complete area including making good any damages complete all as specified and as directed.

Cleaning and degermination of water storage tank 500 litres capacity of any description and in any position comprising following seven stages of operation complete all as under :- (i) Drain out water by opening wash out pipe or any other suitable method approved by Engr in Charge. (ii) Cleaning the algae formation inside the tank by using TERBAC G5 laboratory tested chemical test (Test result to be submitted before the operation of work) (iii) Scrubbing the walls of tank throughly with mechanical scrubber and cleaning with fresh water using high speed jet pump. (iv) Degermification by using TERBAC-G5 halogen compound (v) Cleaning the floor of tank using industrial vaccum cleaner. (vi) Second bacteria screening by sterilising method using ultra violet ray within the tank to remove all suspended bacteria. (vii) Final cleaning with fresh water and third bacteria screening to sterilise the floor of water tank using laboratory certified branded strong oxidising agent TERBAC-G65 and reconning the pipe. Note Cost of staging and necessary working platform shall deemed to be included in quoted rate.Contractor shall ensure necessary saftey precations of workers during execution of work.

Cleaning and degermination of water storage tank 1000 litres capacity of any description and in any position comprising following seven stages of operation complete all as under :- (i) Drain out water by opening wash out pipe or any other suitable method approved by Engr in Charge. (ii) Cleaning the algae formation inside the tank by using TERBAC G5 laboratory tested chemical test (Test result to be submitted before the operation of work) (iii) Scrubbing the walls of tank throughly with mechanical scrubber and cleaning with fresh water using high speed jet pump. (iv) Degermification by using TERBAC-G5 halogen compound (v) Cleaning the floor of tank using industrial vaccum cleaner. (vi) Second bacteria screening by sterilising method using ultra violet ray within the tank to remove all suspended bacteria. (vii) Final cleaning with fresh water and third bacteria screening to sterilise the floor of water tank using laboratory certified branded strong oxidising agent TERBAC-G65 and reconning the pipe. Note Cost of staging and necessary working platform shall deemed to be included in quoted rate.Contractor shall ensure necessary saftey precations of workers during execution of work.

Cleaning and degermination of water storage tank 2000 litres capacity of any description and in any position comprising following seven stages of operation complete all as under :- (i) Drain out water by opening wash out pipe or any other suitable method approved by Engr in Charge. (ii) Cleaning the algae formation inside the tank by using TERBAC G5 laboratory tested chemical test (Test result to be submitted before the operation of work) (iii) Scrubbing the walls of tank throughly with mechanical scrubber and cleaning with fresh water using high speed jet pump. (iv) Degermification by using TERBAC-G5 halogen compound (v) Cleaning the floor of tank using industrial vaccum cleaner. (vi) Second bacteria screening by sterilising method using ultra violet ray within the tank to remove all suspended bacteria. (vii) Final cleaning with fresh water and third bacteria screening to sterilise the floor of water tank using laboratory certified branded strong oxidising agent TERBAC-G65 and reconning the pipe. Note Cost of staging and necessary working platform shall deemed to be included in quoted rate.Contractor shall ensure necessary saftey precations of workers during execution of work.

In repair gun metal, globe or gate valves, 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

In repair gun metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

In repair gun metal, globe or gate valves, 15 mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

In repairs 20 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 210 grams, screwed for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

In repairs 25 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 210 grams, screwed for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Dismantling water tanks of capacity in litres exc. 500 ltrs and n exc 1000 complete all as specified and as directed.

Dismantling water tanks of capacity in litres exc 1000 ltrs and n exc 2000 complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs complete all as specified and as directed. (Work from GF to roof top) Make : Sintex / Polycon / Rotex

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs complete all as specified and as directed. (Work from GF to roof top) Make : Sintex / Polycon / Rotex

Preparing newly plastered wall surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer complete all as specified and as directed.

Preparation of old painted surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

Preparation of old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ) Make : Super-Snocem / Durocem / Aquacem

Preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed.

25 mm thick, PCC 1:2:4, Type B-0, using 10mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled with power road roller of 8 to 12 ton capacity and consolidated to required gradient and camber complete all as specified.

100 mm thick, PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in Floors / Hard standing / Path etc., surface finished fair and even complete all as specified and as directed.

Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size not exceeding 0.36 Sq.m, 9 to 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size not exceeding 0.36 Sq.m, 9 to 10 mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including backing coat of 10 mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including backing coat of 10 mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.36 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.36 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10 mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. Make : Johnson / Kajaria / Orient / Cera / Asian

Dismantling of stone slabs and tiles of any description or thickness laid dry and pointed in any mortar, in floors, aprons etc.

Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire height of Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and joints shall match with the flooring complete all as specified and as directed.

Glazed Polish finished coloured Chequered Cement Concrete Tiles of thickness 23 to 25 mm, made with M-25 Grade Precast Cement Concrete, Hydraulically pressed of size not less than 300 X 300 mm, of approved shape, colour and pattern, set, jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

100 mm thick, PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Sub base for flooring complete all as specified and as directed.

Sand Filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Inter Locking Paving Blocks of 60mm thick, made with M35 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floors complete all as specified and directed. Make: A-one tile/ Bansal /wonder crete/ Bharat pavers / NITCO/ Ultra Tiles Pvt Ltd / Mehtab Tiles

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over screed bed 20 mm thick CM 1:6 complete all as specified and directed.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto and including backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12 mm dia holes up to 300 mm deep and 300 mm centre to centre including plugging holes complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.

Demolition of un-reinforced cement concrete in any floors and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M & L for filling Polymer Modified Non Shrinking Slurry using Brush Bond Powder and Nitobond BB Acrylic Emulsion of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Batik India Pvt. Ltd. for Sunken Floors for Toilets by drilling holes at 60cm interval to a depth of 60 mm, 20mm dia and applying slurry mixed with Conbextra EP 10 (Epoxy resin injection grout) of M/s Fosroc Chemicals or equivalent approved chemical all as per manufacturer's instructions complete all as directed.

Preparing surfaces of sunken floor and applying a coat of Brush bond of M/s Fosroc Chemicals or equivalent approved water proofing coating as per manufacturer's instructions complete all as required and as directed.

In repairs UPVC Pipe of 50 mm bore, of pressure rating 10 Kgf / Sq.cm including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, sockets etc and fixed to walls, ceiling, and laid on floors including testing complete all as specified and as directed. Make: Astral / Ashirwad Flowguard / Kisan / Reliance / Supreme / Prince

PCC 1:4:8, Type D2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.

Taking down Chowkats or frames including shutters not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed.

In repair solid PVC Door frame of size 50 mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specified complete all as specified and as directed. Make: Kumar Arch Tech Pvt. Ltd / Sintex India Ltd. / Polywood / Rajashri Plastiwood Ltd. / Marino / Hindopan

In repair Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as specified and as directed. Make: Kumar Arch Tech Pvt. Ltd / Sintex India Ltd. / Polywood / Rajashri Plastiwood Ltd. / Marino / Hindopan

100mm long medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning complete all as specified and as directed.

15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning complete all as specified and as directed.

20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning complete all as specified and as directed.

25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Refixing old steel tubing of 25 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

Taking up or down 40 mm bore steel tubing and connections, including cleaning complete all as specified and as directed.

40 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Refixing old steel tubing of 40 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

Two way CP bib tap for providing connection for health faucet complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs Health Faucet with 1 m long flexible tube, wall hook, non return valve complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs. 20mm bore brass chromium plated tubular towel rail, 'D' type, 60cm long between flanges complete all as specified and as directed. Make: Prayag / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine

PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved pattern and design complete all as specified and as directed. Make : PRAYAG, CAT No - 551.

Cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc, cutting n.exc. 10cm girth in stone, concrete block or concrete slab for concealling the water supply pipes complete all as specified and as directed.

In repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :Jaquar, M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s Cera ( All are 1st quality)

In repairs Plastic Water Closet Seat, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. Make: Johnson Peddar / Parryware / Cera

Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make : M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

Toilet paper holder of vitreous china or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. MAKE : JAQUAR Cat log no. ACN-1153 S or equivalent in Cera / Plumber

In repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including brackets, waste coupling, PVC Connection, concealed brackets, cutting and pinning in ends of brackets or erecting stand complete all as specified and as directed. Make : Jaquar & Company Pvt. Ltd. / Prayag / Kohler / Roca / Cera [First Quality] / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

In repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make: Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

In repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

In repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

In repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

PVC (SWR) junction single T equal or unequal over 110 mm bore complete all as specified and as directed.

PVC (SWR) junction single T equal or unequal over 75 mm bore complete all as specified and as directed.

PVC (SWR) junction double T equal or unequal over 110 mm bore complete all as specified and as directed.

PVC (SWR) junction double T equal or unequal over 75 mm bore complete all as specified and as directed.

In repairs Stainless steel grating 100mm dia outlet fixed with white / colour cement complete all as specified and as directed.

Hacking out broken glasses (any thickness ; size or design portion ) from wooden /metal frame complete all as specified and as directed.

4mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan

In repair stainless steel wire mesh of 0.36 mm dia and average width of aperture 1.4 mm dia fixed with stainless steel wire staples and necessary welding work complete all as specified and as directed.

In repair of soap dish holder fixing to wall complete all as specified and as directed.

In repairs 15 mm bore chromium plated bib tap of fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs stop valve fancy type, chromium plated with long shank and cup (concealed type), screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs stop valve/ angular stop cock fancy type, chromium plated, screwed alloy, screed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed 15m bore pipe complete all as specified and as directed. Make : Jaquar / Hindware / Orient / Seiko / Dripless /Cera

In repairs pillar cock with 200mm extension body complete all as specified and as directed. Make : M/s Leader, M/s Zenith, M/s Crescent

In repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

In repairs 32mm dia, 1m long PVC waste pipe fixed to Wash Hand Basin / Kitchen Sinks complete all as specified and as directed. Make : M/s Prayag / M/s Poly Tuf

Dismantling of boarding any description fixed in any position with nail complete all as specifed

Anodized aluminium snap grid frame work with size of grid 605x605mm made out of aluminium ‘T’ of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls for false ceiling including 4mm dia Galvanized mild steel wire suspender, making position for light fittings, including provision of 6mm thick non asbestos fibre cement building, E-board (decorative) , fixed or laid/ inserted to timber/GI/ aluminium frame work with screw complete all as specified and as directed.

In repairs Seamless Calcium Silicate False Ceiling made out of 10mm thick, 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and applying two or more coats of Cement based Wall Care Putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using GI perimeter channels of 0.55 mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, fixed to wall with nylon sleeves and screws at 450 mm intervals, GI intermediate channels of size 45 mm X 15 mm X 0.90 mm supported with GI ceiling angles of size 25 mm X 10 mm X 0.55 mm fixed to soffits with steel expansion fasteners / GI cleats at 1220 mm intervals, ceiling section of 0.55 mm thick having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to intermediate channel with connecting clips and in direction perpendicular to the intermediate channels at 457 mm centre to centre complete all as specified and as directed. Make : Armstrong / India Gypsum / Lafarge / Gypstone / Saint Gobain / Everest

Cutting holes in brick walls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and as directed.

MS bends, straps clamps hold fast similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Preparing surfaces of steel and iron surfaces treated with tar or coal tar treating small articles such as stop, covers, gully gratings, hold fasts, end of posts, back of chowkats etc area n exc 0.1 Sqm each complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl nainital or similar pattern roof covering.

Pre-painted Galvalume steel sheets of Trapezoidal profile having pitch 190mm, depth 29mm or Tiled Profile and thickness 0.50mm [Galvalume base-PPGL trapezoidal profile sheets], having tensile strength of 550 Mpa, fixed with aluminium self tapping screws, neoprene and EPDM washers of suitable size in roof covering complete all as specified and as directed. Make : MAKE : M/s TATA BLUE SCOPE, M/s SAXENA MARINE TECH PVT LTD, M/s BUILD TECH / JINDAL

Pre-painted Galvalume steel Plain Sheets and thickness 0.50mm [Galvalume base-PPGL Sheets], having tensile strength of 550 Mpa, in ridges, hips, valley gutters, drip and straight flashing cut to length & bent to shape, girth sheets fixed with aluminium self tapping screws of size 50/75mm and neoprene and EPDM washers of suitable size in roof covering / cladding / eves trim / rake trim and closure trim / valley rain water gutter / down spouts and top rafters etc. complete all as specified and as directed. Make : MAKE : M/s TATA BLUE SCOPE, M/s SAXENA MARINE TECH PVT LTD, M/s BUILD TECH / JINDAL

Dismantling of Structural Steel work including Doors, Gates etc. but excluding framed trusses complete all as specified and as directed.

Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Roof Trusses [framed], trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing [Beam, tee, angle, channel or flat sections] including distance pieces, cleats etc. complete all as specified and as directed.

Mild Steel work conforming to Fe - 290, Grade E-165, as in framed work such as Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.

Grinding,rubbing and polishing of old existing kota/terrazzo floor/dado etc to achieve granite finish complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, PCC 1:2:4 25 mm thick concreting and rendering 15 mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m and finished with a coat of bituminous aluminium paint @ 100 grams per Sq.m on top for water proofing treatment on top for water proofing treatment complete including taking down existing Roof Treatment of any description including PCC padding of any description and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. Make: M/s. HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

Supply only integral Water Proofing Compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Cement concrete tiles 250 x 250x 22mm thick machine pressed set jointed and pointed in cement mortar 1:3 (joint thickness not to exceed 5 mm) mixed with crude oil 5% by wt of cement laid over and including 20 mm thick screed bed in CM(1:6) complete all as specified and as directed. Make:Ultra / Bansal / Nitco / Anjali / Multiwyn

SRIESWARI ENTERPRISES

sai ganesh enterprises

K SATYANARAYANA ENTERPRISES

VIJAY VINAYAKA INFRA

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS