Infrastructural Improvement of Parcel Offices at Ambala Cantt,Rupnagar,Una Himachal,Nangal Dam ,Kalka,Yamuna nagar Jagadhari,Patiala, Dhuri & Abohar Station over ambala division.

01-Part "A" for DSR-2021 Items (Infrastructural Improvement of Parcel

02-Part "B" for IRUSSOR-2021 items (Infrastructural Improvement of

03-Part "C" for DSR-2021 Items (Infrastructural Improvement of Parcel

04-Part "D" for DSR-2021 items (Infrastructural Improvement of Parcel

05-Part "E" for IRUSSOR-2021 items (Infrastructural Improvement of

06-Part "F" for NS items (Infrastructural Improvement of Parcel Offices

Providing and fixing of wall panelling on grid made of PVC profile section of size 1 21mm x 17mm x 1.5 mm filled with UPVC profile section of size 150mm x 10mm x 1.0mm. The edge and periphery covered by extruded PVC beeding of section 28mm x 12mm x 1.0mm complete job including fixing with screws, dash fasteners and other accessories as required Above/

07-Part "G" for DSR-2021 items (Infrastructural Improvement of Parcel

08-Part "H" for IRUSSOR-2021 items (Infrastructural Improvement of

09-Part "I" for NS items (Infrastructural Improvement of Parcel Offices at

Providing and fixing of wall paneling on grid made of PVC profile section of size 1 21mm x 17mm x 1.5 mm filled with UPVC profile section of size 150mm x 10mm x 1.0mm. The edge and periphery covered by extruded PVC beeding of section 28mm x 12mm x 1.0mm complete job including fixing with screws, dash fasteners and other accessories as required.

Supplying printing and fixing banner made of Flex Fibre Cloth with digital printing as per Railways approved matter, colour, pattern etc. complete job Above/

10-Part "J" for DSR-2021 items (Infrastructural Improvement of Parcel

Cantt Station under ADEN/UMB.)

AMBALA DIVISION-ENGG/NORTHERN RLY

Item- 1 %age above , at par or below on all Chapter of DSR 2021 Edition.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from

natural sources)

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources: 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 50 307.95 15397.5

for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, Sqm 50 608.35 30417.5

bressumers and cantilevers

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Kg 3000 89.65 268950

Fe-500D or more.

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

8.0 CLADDING WORK

8.20S STONE WORK DRY CLADDING

AMBALA DIVISION-ENGG/NORTHERN RLY

8.31 Providing and fixing Ist quality ceramic glazed Sqm 120 1063.45 127614

wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of

approved make, in all colours, shades except

burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick

bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white

cement mixed with pigment of matching

shade complete.

8.32 Designing, fabricating, testing, installing and Sqm 148 4474.2 662181.6

fixing in position Curtain Wall with Aluminium

Composite Panel Cladding, with open grooves

for linear as well as curvilinear portions of the

building , for all heights and all levels etc.

including: (a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the

structural and functional design. (b) Providing,

fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan

shape in metalic colour of approved shades

made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR

grade mineral core sandwiched between two

Aluminium sheets (each 0.5mm thick). The

aluminium composite panel cladding sheet

shall be coil coated, with Kynar 500 based

PVDF / Lumiflon based fluoropolymer resin

coating of approved colour and shade on face

# 1 and polymer (Service) coating on face # 2

as specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone

sealant, backer rods etc. (c) The fastening

brackets of Aluminium alloy 6005 T5 / MS with

Hot Dip Galvanised with serrations and

11 serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor

bolts of approved make in SS 316, Nylon

separators to prevent bi-metallic contacts all

complete required to perform as per

specification and drawing The item includes

cost of all material & labour component, the

cost of all mock ups at site, cost of all samples

of the individual components for testing in an

approved laboratory, field tests on the

assembled working curtain wall with

aluminium composite panel cladding, cleaning

and protection of the curtain wall with

aluminium composite panel cladding till the

handing over of the building for occupation.

Base frame work for ACP cladding is payable

under the relevant aluminium item.s The

Contractor shall provide curtain wall with

aluminium composite panel cladding, having

all the performance characteristics all

complete , as per the Architectural drawings,

as per item description, as specified, as per

the approved shop drawings and as directed

by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on

the external face of the curtain wall with

Aluminum Composite Panel Cladding

(including width of groove) shall be measured

in sqm. up to two decimal places.

10.0 STEEL WORK

AMBALA DIVISION-ENGG/NORTHERN RLY

10.1 Structural steel work in single section, fixed Kg 3000 93.05 279150

with or without connecting plate, including

12 cutting, hoisting, fixing in position and

applying a priming coat of approved steel

primer all complete.

10.2 Structural steel work riveted, bolted or welded Kg 2500 111.95 279875

in built up sections, trusses and framed work,

13 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

10.16.3 Electric resistance or induction butt welded Kg 3000 140.85 422550

11.0 FLOORING

11.41S VITRIFIED FLOOR TILES

Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar

1:4 (1 cement: 4 coarse sand) jointing with

11.41A grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and

matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet

for placing the tiles gently and easily.

Glazed vitrified floor tiles polished finish of

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

12.0 ROOFING

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the

12.40 masonry surrounded with 12 mm thick cement

mortar of the same mix, as that of masonry

(lead caulking will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised

- PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.5 Bend 87.5 degrees

13.0 FINISHING

13.11S CEMENT PLASTER IN TWO COATS

AMBALA DIVISION-ENGG/NORTHERN RLY

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint

13.48 system for interiors and exteriors using Primer

as per manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25 Sqm 1502.68 158.95 238850.99

20 ltr/10 sqm over and including one coat of

Special primer applied @ 0.75 ltr /10 sqm

17.0 SANITARY INSTALLATIONS

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,

17.1 with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and

making good the walls and floors wherever

17.1.1 White Vitreous china Orissa pattern W.C. pan Each 2 5781.35 11562.7

21 of size 580x440 mm with integral type foot

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush

17.2 pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and

making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic Each 2 5540.55 11081.1

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

17.7 C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and

making good the walls wherever require:

17.7.3 White Vitreous China Wash basin size 550x400 Each 2 2040.85 4081.7

mm with a pair of 15 mm C.P. brass pillar taps

17.8 Providing and fixing white vitreous china Each 2 1500.05 3000.1

pedestal for wash basin completely recessed

at the back for the reception of pipes and

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 2 299.35 598.7

with flexible tube upto 1 metre long with S.S.

25 triangular plate to Eureopean type W.C. of

quality and make as approved by Engineer - in

Providing and fixing mirror of superior glass (of

approved quality) and of required shape and

17.32 size with plastic moulded frame of approved

make and shade with 6 mm thick hard board

17.34 Providing and fixing toilet paper holder :

18.0 WATER SUPPLY

18.4S PP-R PIPES

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS 15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes testing of

joints complete as per direction of Engineer-in-

Charge. -Internal Exposed on walls

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801 UV stabilized & anti -

microbial fusion welded, having thermal

18.6 stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, including trenching, refilling &

testing of joints complete as per direction of

Engineer-in-Charge. -External work

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end) :

Providing and fixing ball valve (brass) of

18.18 approved quality, High or low pressure, with

plastic floats complete :

Providing and fixing uplasticised PVC

connection pipe with brass unions :

18.21.2 45 cm length

C.I. SLUICE VALVES/ FIRE HYDRANTS &

18.48 Providing and placing on terrace (at all floor Litre 1000 9.7 9700

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without

fittings and the base support for tank.

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass angle valve for

18.53 basin mixer and geyser points of approved

quality conforming to IS:8931

18.54S PTMT FITTINGS

Providing and fixing PTMT bib cock of

approved quality and colour.

18.54.1 15mm nominal bore, 86 mm long, weighing Each 12 109.85 1318.2

not less than 88 gms

Providing and fixing PTMT pillar cock of

approved quality and colour.

not less than 110 gms

Providing and fixing PTMT, push cock of

approved quality and colour.

not less than 75 gms

18.59S AIR VALVE & WATER METER (BULK TYPE)

AMBALA DIVISION-ENGG/NORTHERN RLY

18.65 Providing and fixing PTMT soap Dish Holder Each 4 96.75 387

having length of 138mm, breadth 102mm,

38 height of 75mm with concealed fitting

arrangements, weighing not less than 106

19.0 DRAINAGE

Providing and fixing square-mouth S.W. gully

trap class SP-1 complete with C.I. grating brick

masonry chamber with water tight C.I. cover

19.4 with frame of 300 x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per

standard design:

Providing and laying non-pressure NP2 class

(light duty) R.C.C. pipes with collars jointed

19.6 with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

21.0 ALUMINIUM WORK

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with

extruded built up standard tubular sections/

appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required

dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides

with required EPDM rubber/ neoprene gasket

etc. Aluminium sections shall be smooth, rust

free, straight, mitred and jointed mechanically

wherever required including cleat angle,

Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and

the directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness Kg 200 466.3 93260

of powder coating 50 micron)

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots

and making provision for fixing of fittings

wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings

shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness Kg 180 564.8 101664

of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings

and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid

in basic item):

21.3.2 With float glass panes of 5 mm thickness Sqm 30 1325.55 39766.5

(weight not less than 12.50 kg/sqm)

Schedule 02-Part "B" for IRUSSOR-2021 items (Infrastructural Improvement of Parcel Offices at

Ambala Cantt Station under ADEN/UMB.)

Item- 1 %age above , at par or below on all items of all chapter of SOR 2021 edition.

S No. Item No Description of Item Unit Qty Rate Amount

AMBALA DIVISION-ENGG/NORTHERN RLY

Hiring of machinery for minor miscellaneous

works for short duration including

operator/driver, fuel, lubricants and

consumable. The contractor shall arrange all

statutory permits as required by rules and

regulations prevailing in the area of work.

Payment shall be made for actual working

1 211201 JCB Backhoe Loaders 3DX Plus or similar with Hour 30.00 858.69 25760.70

minimum 1.10 cum bucket capacity

Schedule 03-Part "C" for DSR-2021 Items (Infrastructural Improvement of Parcel Offices at

Rupnagar, Una Himachal & Nangal dam Station under ADEN/SIR.)

Item- 1 %age above , at par or below on all Chapter of DSR 2021 Edition.

S No. Item No Description of Item Unit Qty Rate Amount

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from

natural sources)

Providing and laying cement concrete in

retaining walls, return walls, walls (any

thickness) including attached pilasters,

columns, piers, abutments, pillars, posts,

4.2 struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks,

plain window sills, fillets, sunken floor etc., up

to floor five level, excluding the cost of

centering, shuttering and finishing:

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources).

Centering and shuttering including strutting,

propping etc. and removal of form work for :

3 4.3.1 Foundations, footings, bases for columns Sqm 40 307.95 12318

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded Kg 10000 111.95 1119500

in built up sections, trusses and framed work,

5 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

10.16.3 Electric resistance or induction butt welded Kg 3250 140.85 457762.5

11.0 FLOORING

AMBALA DIVISION-ENGG/NORTHERN RLY

11.5 62 mm thick cement concrete flooring with Sqm 450 928.65 417892.5

concrete hardener topping, under layer 50 mm

thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm

nominal size) and top layer 12mm thick

cement hardener consisting of mix 1:2 (1

7 cement hardener mix : 2 graded stone

aggregate, 6mm nominal size) by volume,

hardening compound mixed @ 2 litre per 50

kg of cement or as per manufacture's

specifications. This includes cost of cement

slurry, but excluding the cost of nosing of

steps etc. complete.

12.0 ROOFING

Providing and fixing on wall face unplasticised

- PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.50 Providing and fixing precoated galvanised iron Sqm 400 671.55 268620

profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-

charge) 0.50 mm (+ 0.05 %) total coated

thickness with zinc coating 120 grams per sqm

as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the

sheet and polyester top coat 15-18 microns.

Sheet should have protective guard film of 25

8 microns minimum to avoid scratches during

transportation and should be supplied in

single length upto 12 metre or as desired by

Engineer-in-charge. The sheet shall be fixed

using self drilling /self tapping screws of size

(5.5x 55 mm) with EPDM seal, complete upto

any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters

and trusses and including cutting to size and

shape wherever required.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Schedule 04-Part "D" for DSR-2021 items (Infrastructural Improvement of Parcel Offices at Kalka

Station under ADEN/SML.)

Item- 1 %age above , at par or below on all Chapter of DSR 2021 Edition.

S No. Item No Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

By Mechanical Transport including

loading,unloading and stacking

1.1.18 Disposal of moorum/building rubbish/ malba/ cum 5 411.3 2056.5

similar unserviceable, dismantled or waste

material by mechanical transport including

1 loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km

for all lifts, complete as per directions of

Engineer-in-charge.

2.0 EARTH WORK

AMBALA DIVISION-ENGG/NORTHERN RLY

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from

natural sources)

derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from

natural sources)

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources: 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.3 Reinforced cement concrete work in beams, cum 2 10719.3 21438.6

suspended floors, roofs having slope up to 15

degree landings, balconies, shelves, chajjas,

lintels, bands, plain window sills, staircases

and spiral stair cases above plinth level up to

6 floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources).

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.3 Suspended floors, roofs, landings, balconies Sqm 10 766.55 7665.5

and access platform

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 400 89.65 35860

Fe-500D or more.

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

AMBALA DIVISION-ENGG/NORTHERN RLY

8.0 CLADDING WORK

8.20S STONE WORK DRY CLADDING

8.31 Providing and fixing Ist quality ceramic glazed Sqm 20 1063.45 21269

wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of

approved make, in all colours, shades except

burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick

bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white

cement mixed with pigment of matching

shade complete.

9.0 WOOD AND P.V.C. WORK

ANODISED ALUMINIUM FITTINGS (ALL FITTINGS

SHALL BE ISI MARKED)

Providing and fixing aluminium tower bolts, ISI

marked, anodised (anodic coating not less

9.97 than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor

door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS :

1868) transparent or dyed to required colour

and shade, with necessary screws etc.

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded Kg 50 111.95 5597.5

in built up sections, trusses and framed work,

14 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

10.22 Welding by gas or electric plant including cm 50 3.4 170

transportation of plant at site etc. complete.

Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in

10.25 position and applying a priming coat of

approved steel primer using structural steel

etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 50 142.3 7115

brackets, gates and similar works

11.0 FLOORING

Cement concrete flooring 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate)

11.3 finished with a floating coat of neat cement,

including cement slurry, but excluding the cost

of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone Sqm 20 545 10900

11.41S VITRIFIED FLOOR TILES

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement :

4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the

joints with white cement and matching

pigments etc., complete.

12.0 ROOFING

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the

12.40 masonry surrounded with 12 mm thick cement

mortar of the same mix, as that of masonry

(lead caulking will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised

- PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.5 Bend 87.5 degrees

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.80 Providing and applying white cement based Sqm 30 123.85 3715.5

putty of average thickness 1 mm, of approved

23 brand and manufacturer, over the plastered

wall surface to prepare the surface even and

smooth complete.

Applying priming coats with primer of

13.85 approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

Distempering with 1st quality acrylic

distember (Ready mix) having VOC content

less than 50 grams/ litre of approved brand

and manufacture to give an even shade :

13.91 Removing dry or oil bound distemper, water Sqm 70 20.85 1459.5

proofing cement paint and the like by

25 scrapping, sand papering and preparing the

surface smooth including necessary repairs to

scratches etc. complete.

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

14.0 REPAIRS TO BUILDING

14.72S FINISHING

AMBALA DIVISION-ENGG/NORTHERN RLY

14.75 Repair to plaster of thickness 12mm to 20 mm Sqm 8 540.35 4322.8

in patches of area 2.5 sqm and under,

including cutting the patch in proper shape,

raking out joints and preparing plastering the

wall surface with white cement based polymer

modified self curing mortar, including disposal

of rubbish, all complete as per the direction of

Engineer-In-Charge.

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per direction

of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 2 2007.1 4014.2

equivalent design mix)

15.3 Demolishing R.C.C. work manually/ by cum 1 2928.1 2928.1

mechanical means including stacking of steel

29 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead :

Taking out doors, windows and clerestory

15.13 window shutters (steel or wood) including

stacking within 50 metres lead :

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

17.0 SANITARY INSTALLATIONS

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,

17.1 with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and

making good the walls and floors wherever

17.1.1 White Vitreous china Orissa pattern W.C. pan Each 1 5781.35 5781.35

36 of size 580x440 mm with integral type foot

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush

17.2 pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and

making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic Each 1 5540.55 5540.55

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing white vitreous china flat

back half stall urinal of size 580x380x350 mm

with white PVC automatic flushing cistern, with

fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P.

brass) with waste fitting as per IS : 2556, C.I.

trap with outlet grating and other couplings in

C.P. brass, including painting of fittings and

cutting and making good the walls and floors

wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. Each 1 10128.3 10128.3

automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

17.7 C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and

making good the walls wherever require:

17.7.2 White Vitreous China Wash basin size 630x450 Each 1 1913.75 1913.75

mm with a single 15 mm C.P. brass pillar tap

17.31 Providing and fixing 600x450 mm beveled Each 1 1411.15 1411.15

edge mirror of superior glass (of approved

40 quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass

screws and washers complete.

17.33 Providing and fixing 600x120x5 mm glass Each 1 942.15 942.15

shelf with edges round off, supported on

anodised aluminium angle frame with C.P.

brass brackets and guard rail complete fixed

with 40 mm long screws, rawl plugs etc.,

18.0 WATER SUPPLY

18.4S PP-R PIPES

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS 15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes testing of

joints complete as per direction of Engineer-in-

Charge. -Internal Exposed on walls

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

18.5 random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes the cost of

cutting chases and making good the same

including testing of joints complete as per

direction of Engineer-in-Charge. -Concealed

work,including cutting chases and making

good the wall etc.

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801 UV stabilized & anti -

microbial fusion welded, having thermal

18.6 stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, including trenching, refilling &

testing of joints complete as per direction of

Engineer-in-Charge. -External work

AMBALA DIVISION-ENGG/NORTHERN RLY

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long nose bib

cock of approved quality conforming to IS

standards and weighing not less than 810

Providing and fixing C.P. brass long body bib

cock of approved quality conforming to IS

standards and weighing not less than 690

Providing and fixing C.P. brass angle valve for

18.53 basin mixer and geyser points of approved

quality conforming to IS:8931

18.53A Providing and fixing C.P. Brass extension Each 1 61.7 61.7

nipple (size 15mmx50mm) of approved make

and quality as per direction of Engineer-in-

22.0 WATER PROOFING

22.9 Providing and laying six courses water Sqm 50 675 33750

proofing treatment with bitumen felt over

roofs consisting of first, third and fifth course

of blown bitumen 85/25 or 90/15 conforming

to IS : 702 applied hot @ 1.45, 1.20 and 1.45

Kg per square metre of area respectively,

50 second and fourth courses of roofing felt type

3 grade I conforming to IS : 1322 (Hessian

based self finished bitumen felt) , sixth and

final course of stone grit 6 mm and down size

or pea sized gravel spread at 6 cubic

decimeter per sqm including preparation of

surface but excluding grading, complete.

22.12 Supplying and applying bituminous solution Sqm 50 50.25 2512.5

51 primer on roof and / or wall surface at 0.24

22.14 Grading roof for water proofing treatment with

Schedule 05-Part "E" for IRUSSOR-2021 items (Infrastructural Improvement of Parcel Offices at

Kalka Station under ADEN/SML.)

Item- 1 %age above , at par or below on all items of all chapter of SOR 2021 edition.

S No. Item No Description of Item Unit Qty Rate Amount

Hiring of machinery for minor miscellaneous

works for short duration including

operator/driver, fuel, lubricants and

consumable. The contractor shall arrange all

statutory permits as required by rules and

regulations prevailing in the area of work.

Payment shall be made for actual working

1 211201 JCB Backhoe Loaders 3DX Plus or similar with Hour 5.00 858.69 4293.45

minimum 1.10 cum bucket capacity

Schedule 07-Part "G" for DSR-2021 items (Infrastructural Improvement of Parcel Offices at Yamuna

nagar Jagadhari station under ADEN/SRE.)

Item- 1 %age above , at par or below on all Chapter of DSR 2021 Edition.

S No. Item No Description of Item Unit Qty Rate Amount

1.0 CARRIAGE OF MATERIALS

By Mechanical Transport including

loading,unloading and stacking

AMBALA DIVISION-ENGG/NORTHERN RLY

1.1.18 Disposal of moorum/building rubbish/ malba/ cum 5 411.3 2056.5

similar unserviceable, dismantled or waste

material by mechanical transport including

1 loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km

for all lifts, complete as per directions of

Engineer-in-charge.

2.0 EARTH WORK

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from

natural sources)

derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from

natural sources)

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources: 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.3 Suspended floors, roofs, landings, balconies Sqm 10 766.55 7665.5

and access platform

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 650 89.65 58272.5

Fe-500D or more.

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

8.0 CLADDING WORK

AMBALA DIVISION-ENGG/NORTHERN RLY

8.20S STONE WORK DRY CLADDING

8.31 Providing and fixing Ist quality ceramic glazed Sqm 20 1063.45 21269

wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of

approved make, in all colours, shades except

burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick

bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white

cement mixed with pigment of matching

shade complete.

9.0 WOOD AND P.V.C. WORK

ANODISED ALUMINIUM FITTINGS (ALL FITTINGS

SHALL BE ISI MARKED)

Providing and fixing aluminium tower bolts, ISI

marked, anodised (anodic coating not less

9.97 than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor

door stopper, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS :

1868) transparent or dyed to required colour

and shade, with necessary screws etc.

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded Kg 200 111.95 22390

in built up sections, trusses and framed work,

13 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

10.22 Welding by gas or electric plant including cm 50 3.4 170

transportation of plant at site etc. complete.

Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in

10.25 position and applying a priming coat of

approved steel primer using structural steel

etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, Kg 160 142.3 22768

brackets, gates and similar works

11.0 FLOORING

Cement concrete flooring 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate)

11.3 finished with a floating coat of neat cement,

including cement slurry, but excluding the cost

of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone Sqm 150 545 81750

11.41S VITRIFIED FLOOR TILES

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement :

4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the

joints with white cement and matching

pigments etc., complete.

12.0 ROOFING

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the

12.40 masonry surrounded with 12 mm thick cement

mortar of the same mix, as that of masonry

(lead caulking will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised

- PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.5 Bend 87.5 degrees

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.80 Providing and applying white cement based Sqm 100 123.85 12385

putty of average thickness 1 mm, of approved

22 brand and manufacturer, over the plastered

wall surface to prepare the surface even and

smooth complete.

Applying priming coats with primer of

13.85 approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

Distempering with 1st quality acrylic

distember (Ready mix) having VOC content

less than 50 grams/ litre of approved brand

and manufacture to give an even shade :

13.91 Removing dry or oil bound distemper, water Sqm 100 20.85 2085

proofing cement paint and the like by

24 scrapping, sand papering and preparing the

surface smooth including necessary repairs to

scratches etc. complete.

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

14.0 REPAIRS TO BUILDING

14.72S FINISHING

AMBALA DIVISION-ENGG/NORTHERN RLY

14.75 Repair to plaster of thickness 12mm to 20 mm Sqm 20 540.35 10807

in patches of area 2.5 sqm and under,

including cutting the patch in proper shape,

raking out joints and preparing plastering the

wall surface with white cement based polymer

modified self curing mortar, including disposal

of rubbish, all complete as per the direction of

Engineer-In-Charge.

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per direction

of Engineer - in - charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 5 2007.1 10035.5

equivalent design mix)

15.3 Demolishing R.C.C. work manually/ by cum 2 2928.1 5856.2

mechanical means including stacking of steel

28 bars and disposal of unserviceable material

within 50 metres lead as per direction of

Engineer - in- charge.

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead :

Taking out doors, windows and clerestory

15.13 window shutters (steel or wood) including

stacking within 50 metres lead :

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

16.0 ROAD WORK

16.49S MISCELLANEOUS

Providing and laying factory made chamfered

edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light

traffic parking etc, of required strength,

thickness & size/ shape, made by table

vibratory method using PU mould, laid in

required colour & pattern over 50mm thick

compacted bed of sand, compacting and

proper embedding/laying of inter locking

paver blocks into the sand bedding layer

through vibratory compaction by using plate

vibrator, filling the joints with sand and cutting

of paver blocks as per required size and

pattern, finishing and sweeping extra sand.

complete all as per direction of Engineer-in-

16.91.1 60mm thick cement concrete paver block of Sqm 10.05 932.35 9373.85

35 M-35 grade with approved colour, design &

17.0 SANITARY INSTALLATIONS

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing water closet squatting

pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe,

17.1 with manually controlled device (handle lever)

conforming to IS : 7231, with all fittings and

fixtures complete, including cutting and

making good the walls and floors wherever

17.1.1 White Vitreous china Orissa pattern W.C. pan Each 1 5781.35 5781.35

36 of size 580x440 mm with integral type foot

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush

17.2 pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and

making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic Each 1 5540.55 5540.55

Providing and fixing white vitreous china flat

back half stall urinal of size 580x380x350 mm

with white PVC automatic flushing cistern, with

fittings, standard size C.P. brass flush pipe,

spreaders with unions and clamps (all in C.P.

brass) with waste fitting as per IS : 2556, C.I.

trap with outlet grating and other couplings in

C.P. brass, including painting of fittings and

cutting and making good the walls and floors

wherever required :

17.5.1 Single half stall urinal with 5 litre P.V.C. Each 1 10128.3 10128.3

automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

17.7 C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and

making good the walls wherever require:

17.7.2 White Vitreous China Wash basin size 630x450 Each 1 1913.75 1913.75

mm with a single 15 mm C.P. brass pillar tap

17.31 Providing and fixing 600x450 mm beveled Each 2 1411.15 2822.3

edge mirror of superior glass (of approved

40 quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass

screws and washers complete.

17.33 Providing and fixing 600x120x5 mm glass Each 2 942.15 1884.3

shelf with edges round off, supported on

anodised aluminium angle frame with C.P.

brass brackets and guard rail complete fixed

with 40 mm long screws, rawl plugs etc.,

18.0 WATER SUPPLY

18.4S PP-R PIPES

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS 15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes testing of

joints complete as per direction of Engineer-in-

Charge. -Internal Exposed on walls

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

18.5 random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes the cost of

cutting chases and making good the same

including testing of joints complete as per

direction of Engineer-in-Charge. -Concealed

work,including cutting chases and making

good the wall etc.

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS:15801 UV stabilized & anti -

microbial fusion welded, having thermal

18.6 stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, including trenching, refilling &

testing of joints complete as per direction of

Engineer-in-Charge. -External work

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931 :

Providing and fixing C.P. brass long nose bib

cock of approved quality conforming to IS

standards and weighing not less than 810

Providing and fixing C.P. brass long body bib

cock of approved quality conforming to IS

standards and weighing not less than 690

Providing and fixing C.P. brass angle valve for

18.53 basin mixer and geyser points of approved

quality conforming to IS:8931

18.53A Providing and fixing C.P. Brass extension Each 1 61.7 61.7

nipple (size 15mmx50mm) of approved make

and quality as per direction of Engineer-in-

22.0 WATER PROOFING

22.9 Providing and laying six courses water Sqm 100 675 67500

proofing treatment with bitumen felt over

roofs consisting of first, third and fifth course

of blown bitumen 85/25 or 90/15 conforming

to IS : 702 applied hot @ 1.45, 1.20 and 1.45

Kg per square metre of area respectively,

50 second and fourth courses of roofing felt type

3 grade I conforming to IS : 1322 (Hessian

based self finished bitumen felt) , sixth and

final course of stone grit 6 mm and down size

or pea sized gravel spread at 6 cubic

decimeter per sqm including preparation of

surface but excluding grading, complete.

22.12 Supplying and applying bituminous solution Sqm 100 50.25 5025

51 primer on roof and / or wall surface at 0.24

22.14 Grading roof for water proofing treatment with

AMBALA DIVISION-ENGG/NORTHERN RLY

Schedule 08-Part "H" for IRUSSOR-2021 items (Infrastructural Improvement of Parcel Offices at

Yamuna nagar Jagadhari station under ADEN/SRE.)

Item- 1 %age above , at par or below on all items of all chapter of SOR 2021 edition.

S No. Item No Description of Item Unit Qty Rate Amount

Hiring of machinery for minor miscellaneous

works for short duration including

operator/driver, fuel, lubricants and

consumable. The contractor shall arrange all

statutory permits as required by rules and

regulations prevailing in the area of work.

Payment shall be made for actual working

1 211201 JCB Backhoe Loaders 3DX Plus or similar with Hour 10.00 858.69 8586.90

minimum 1.10 cum bucket capacity

Schedule 10-Part "J" for DSR-2021 items (Infrastructural Improvement of Parcel Offices at Patiala,

Dhuri & Abohar station under ADEN/PTA & ADEN/BTI.)

Item- 1 %age above , at par or below on all Chapter of DSR 2021 Edition.

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 40 mm nominal size derived from

natural sources)

derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from

natural sources)

5.0 REINFORCED CEMENT CONCRETE

5.1S CAST IN SITU

Reinforced cement concrete work in walls (any

thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five

level, excluding cost of centering, shuttering,

finishing and reinforcement :

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources)

AMBALA DIVISION-ENGG/NORTHERN RLY

5.3 Reinforced cement concrete work in beams, cum 1 10719.3 10719.3

suspended floors, roofs having slope up to 15

degree landings, balconies, shelves, chajjas,

lintels, bands, plain window sills, staircases

and spiral stair cases above plinth level up to

5 floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)

derived from natural sources : 3 graded stone

aggregate 20 mm nominal size derived from

natural sources).

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.3 Suspended floors, roofs, landings, balconies Sqm 28 766.55 21463.4

and access platform

5.9.5 Lintels, beams, plinth beams, girders, Sqm 12 608.35 7300.2

bressumers and cantilevers

5.9.16 Edges of slabs and breaks in floors and walls

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 240 89.65 21516

Fe-500D or more.

6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

level in all shapes and sizes in :

8.0 CLADDING WORK

8.20S STONE WORK DRY CLADDING

8.31 Providing and fixing Ist quality ceramic glazed Sqm 199 1063.45 211626.55

wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of

approved make, in all colours, shades except

burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick

bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white

cement mixed with pigment of matching

shade complete.

9.0 WOOD AND P.V.C. WORK

Providing and fixing 25 mm thick shutters for

cup board etc. :

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)

decorative type, core of block board

9.20 construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with

vertical grains or cross bands and face

veneers on both faces of shutters.

9.20.1 35 mm thick including ISI marked Stainless Sqm 7 3086.1 21602.7

Steel butt hinges with necessary screws

9.70S STAINLESS STEEL FITTINGS

Providing and fixing IS : 12817 marked

9.70 stainless steel butt hinges with stainless steel

screws etc. complete :

AMBALA DIVISION-ENGG/NORTHERN RLY

ANODISED ALUMINIUM FITTINGS (ALL FITTINGS

SHALL BE ISI MARKED)

Providing and fixing aluminium sliding door

bolts, ISI marked anodised (anodic coating not

9.96 less than grade AC 10 as per IS : 1868),

transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI

marked, anodised (anodic coating not less

9.97 than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

9.98 Providing and fixing aluminium pull bolt lock, Each 1 89.9 89.9

ISI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868) transparent

or dyed to required colour and shade, with

necessary screws bolts, nut and washers etc.

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

9.100 than grade AC 10 as per IS : 1868) transparent

or dyed to required colour or shade, with

necessary screws etc. complete :

9.105S GYPSUM BOARD PARTITIONS

9.119 Providing and fixing factory made P.V.C. door Metre 5 408.25 2041.25

frame of size 50x47 mm with awall thickness

of 5 mm, made out of extruded 5mm rigid PVC

foam sheet, mitred at corners and joined with

2 Nos of 150 mm long brackets of 15x15 mm

M.S. square tube, the vertical door frame

18 profiles to be reinforced with 19x19 mm M.S.

square tube of 19 gauge, EPDM rubber gasket

weather seal to be provided through out the

frame. The door frame to be fixed to the wall

using M.S. screws of 65/100 mm size,

complete as per manufacturer's specification

and direction of Engineer- in-Charge.

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing factory made panel PVC

door shutter consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of

19 mm x 19 mm for styles and 15x15 mm for

top & bottom rails. M.S. frame shall have a

coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm

thick heat moulded PVC 'C' channel of size 30

mm thickness, 70 mm width out of which 50

mm shall be flat and 20 mm shall be tapered

in 45 degree angle on both side forming styles

and 5 mm thick, 95 mm wide PVC sheet out of

which 75mm shall be flat and 20 mm shall be

tapered in 45 degree on the inner side to form

top and bottom rail and 115 mm wide PVC

sheet out of which 75 mm shall be flat and 20

mm shall be tapered on both sides to form

lock rail. Top, bottom and lock rails shall be

provided both side of the panel. 10 mm (5 mm

x 2 ) thick, 20 mm wide cross PVC sheet be

provided as gap insert for top rail & bottom

rail, paneling of 5 mm thick both side PVC

sheet to be fitted in the M.S. frame welded/

sealed to the styles & rails with 7 mm (5

mm+2 mm) thick x 15 mm wide PVC sheet

beading on inner side, and joined together

with solvent cement adhesive. An additional 5

mm thick PVC strip of 20 mm width is to be

stuck on the interior side of the 'C' Channel

using PVC solvent adhesive etc. complete as

per direction of Engineer-in-charge,

manufacturer's specification & drawing.

19 9.120.2 30 mm thick pre laminated PVC door shutters Sqm 1.65 2455.1 4050.92

10.0 STEEL WORK

10.2 Structural steel work riveted, bolted or welded Kg 5143 111.95 575758.85

in built up sections, trusses and framed work,

20 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

11.0 FLOORING

11.5 62 mm thick cement concrete flooring with Sqm 295 928.65 273951.75

concrete hardener topping, under layer 50 mm

thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm

nominal size) and top layer 12mm thick

cement hardener consisting of mix 1:2 (1

22 cement hardener mix : 2 graded stone

aggregate, 6mm nominal size) by volume,

hardening compound mixed @ 2 litre per 50

kg of cement or as per manufacture's

specifications. This includes cost of cement

slurry, but excluding the cost of nosing of

steps etc. complete.

11.26S KOTA STONE FLOORING

Kota stone slab flooring over 20 mm (average)

thick base laid over and jointed with grey

cement slurry mixed with pigment to match

the shade of the slab, including rubbing and

polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

AMBALA DIVISION-ENGG/NORTHERN RLY

11.41S VITRIFIED FLOOR TILES

Providing and laying Polished Granite stone

flooring in required design and patterns, in

linear as well as curvilinear portions of the

building all complete as per the architectural

drawings with 18 mm thick stone slab over 20

mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed

with cement slurry and pointing with white

cement slurry admixed with pigment of

matching shade including rubbing , curing and

polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Black, Sqm 35 3908.8 136808

Cherry/Ruby Red or equivalent

12.0 ROOFING

Providing, fixing and embedding sand cast iron

accessories for rain water pipes in the

12.40 masonry surrounded with 12 mm thick cement

mortar of the same mix, as that of masonry

(lead caulking will be paid for separately):

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised

- PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

12.42.5 Bend 87.5 degrees

12.50 Providing and fixing precoated galvanised iron Sqm 65 671.55 43650.75

profile sheets (size, shape and pitch of

corrugation as approved by Engineer-in-

charge) 0.50 mm (+ 0.05 %) total coated

thickness with zinc coating 120 grams per sqm

as per IS: 277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the

sheet and polyester top coat 15-18 microns.

Sheet should have protective guard film of 25

27 microns minimum to avoid scratches during

transportation and should be supplied in

single length upto 12 metre or as desired by

Engineer-in-charge. The sheet shall be fixed

using self drilling /self tapping screws of size

(5.5x 55 mm) with EPDM seal, complete upto

any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters

and trusses and including cutting to size and

shape wherever required.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.44S EXTERIOR FINISHING

Finishing walls with Acrylic Smooth exterior

paint of required shade :

29 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm)

AMBALA DIVISION-ENGG/NORTHERN RLY

Finishing with Deluxe Multi surface paint

13.48 system for interiors and exteriors using Primer

as per manufacturers specifications :

13.48.1 Two or more coats applied on walls @ 1.25 Sqm 1200 158.95 190740

30 ltr/10 sqm over and including one coat of

Special primer applied @ 0.75 ltr /10 sqm

Painting with synthetic enamel paint of

13.61 approved brand and manufacture to give an

Lettering with black Japan paint of approved letter

brand and manufacture per cm

13.80 Providing and applying white cement based Sqm 250 123.85 30962.5

putty of average thickness 1 mm, of approved

33 brand and manufacturer, over the plastered

wall surface to prepare the surface even and

smooth complete.

14.0 REPAIRS TO BUILDING

14.75AS ROUTINE MAINTENANCE WORK

14.87 Providing and laying in situ five course water Sqm 500 454.8 227400

proofing treatment with APP (Atactic

Polypropylene) modified Polymeric

memberane over roof consisting of first coat

of bitumen primer @ 0.40 litre per sqm, 2nd &

4th courses of bonding material @ 1.20

kg/sqm, which shall consist of blown type

bitumen of grade 85/25 conforming to IS : 702,

3rd layer of roofing membrane APP modified

Polymeric membrane 2.0 mm thick of 3.00 Kg/

sqm weight consisting of five layers

prefabricated with centre core as 100 micron

HMHDPE film sandwiched on both sides with

polymeric mix and the polymeric mix is

protected on both side with 20 micron

HMHDPE film. 5th, the top most layer shall be

finished with brick tiles of class designation 10

grouted with cement mortar 1:3 (1 cement : 3

fine sand) mixed with 2% integral water

proofing compound by weight of cement over

a 12 mm layer of cement mortar 1:3 (1

cement : 3 fine sand) and finished neat (item

of laying brick tiles shall be paid for

15.0 DISMANTLING AND DEMOLISHING

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per direction

of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c cum 6 1239.6 7437.6

equivalent design mix)

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead :

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

AMBALA DIVISION-ENGG/NORTHERN RLY

15.56 Dismantling old plaster or skirting raking out Sqm 250 45.05 11262.5

joints and cleaning the surface for plaster

including disposal of rubbish to the dumping

ground within 50 metres lead.

15.57 Dismantling aluminium/ Gypsum partitions, Sqm 50 46.5 2325

doors, windows, fixed glazing and false ceiling

40 including disposal of unserviceable material

and stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge.

15.60 Disposal of building rubbish / malba / similar cum 10 219.35 2193.5

unserviceable, dismantled or waste materials

by mechanical means, including loading,

41 transporting, unloading to approved municipal

dumping ground or as approved by Engineer-

in-charge, beyond 50 m initial lead, for all

leads including all lifts involved.

17.0 SANITARY INSTALLATIONS

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low level

white P.V.C. flushing cistern, including flush

17.2 pipe, with manually controlled device (handle

lever), conforming to IS : 7231, with all fittings

and fixtures complete, including cutting and

making good the walls and floors wherever

17.2.1 W.C. pan with ISI marked white solid plastic Each 2 5540.55 11081.1

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32 mm

17.7 C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and

making good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size Each 1 1679.6 1679.6

43 550x 400 mm with single 15 mm C.P. brass

17.7A Providing and fixing wash basin with C.I. Each 1 3459.05 3459.05

brackets, 15 mm dia CP Brass single hole

basin mixer of approved quality and make,

including painting of fittings and brackets,

cutting and making good the walls wherever

required:- (a) White Vitreous China Wash basin

size 550x400 mm with a 15 mm CP Brass

single hole basin mixer

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 1 299.35 299.35

with flexible tube upto 1 metre long with S.S.

45 triangular plate to Eureopean type W.C. of

quality and make as approved by Engineer - in

17.31 Providing and fixing 600x450 mm beveled Each 4 1411.15 5644.6

edge mirror of superior glass (of approved

46 quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass

screws and washers complete.

Providing and fixing PTMT towel rail complete

with brackets fixed to wooden cleats with CP

brass screws with concealed fittings

arrangement of approved quality and colour.

17.73.1 450 mm long towel rail with total length of Each 1 573.6 573.6

47 495 mm, 78 mm wide and effective height of

88 mm, weighing not less than 170 gms

18.0 WATER SUPPLY

18.4S PP-R PIPES

AMBALA DIVISION-ENGG/NORTHERN RLY

Providing and fixing 3 layer PP-R (Poly

propylene Random copolymer) pipes

confirming to IS 15801, UV stabilized & anti -

microbial fusion welded, having thermal

stability for hot & cold water supply, including

all PP - R plain & brass threaded polypropylene

random fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes testing of

joints complete as per direction of Engineer-in-

Charge. -Internal Exposed on walls

Providing and fixing uplasticised PVC

connection pipe with brass unions :

18.21.2 45 cm length

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass angle valve for

18.53 basin mixer and geyser points of approved

quality conforming to IS:8931

18.54S PTMT FITTINGS

Providing and fixing PTMT bib cock of

approved quality and colour.

not less than 88 gms

18.59S AIR VALVE & WATER METER (BULK TYPE)

18.65 Providing and fixing PTMT soap Dish Holder Each 1 96.75 96.75

having length of 138mm, breadth 102mm,

52 height of 75mm with concealed fitting

arrangements, weighing not less than 106

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

Providing, laying and jointing glazed

stoneware pipes class SP-1 with stiff mixture

19.1 of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints

etc. complete :

Providing and laying cement concrete 1:5:10

(1 cement : 5 coarse sand : 10 graded stone

19.2 aggregate 40 mm nominal size) all-round S.W.

pipes including bed concrete as per standard

Constructing brick masonry manhole in

cement mortar 1:4 ( 1 cement : 4 coarse sand

) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded

stone aggregate 20 mm nominal size),

foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (Zone-III) : 8 graded stone

aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar

1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement :

2 coarse sand : 4 graded stone aggregate 20

mm nominal size) finished with a floating coat

of neat cement complete as per standard

AMBALA DIVISION-ENGG/NORTHERN RLY

Inside size 120x90 cm and 90 cm deep

including C.I. cover with frame (medium duty)

500 mm internal diameter, total weight of

cover and frame to be not less than 116 kg

(weight of cover 58 kg and weight of frame 58

19.7.2.1 With common burnt clay F.P.S. (non modular) Each 2 24405.9 48811.8

bricks of class designation 7.5

Providing and fixing in position pre-cast R.C.C.

19.19 manhole cover and frame of required shape

and approved quality

56 19.19.2.2 Circular shape 500 mm internal diameter Each 2 1056.65 2113.3

21.0 ALUMINIUM WORK

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with

extruded built up standard tubular sections/

appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required

dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides

with required EPDM rubber/ neoprene gasket

etc. Aluminium sections shall be smooth, rust

free, straight, mitred and jointed mechanically

wherever required including cleat angle,

Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and

the directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness Kg 120 466.3 55956

of powder coating 50 micron)

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots

and making provision for fixing of fittings

wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings

shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness Kg 140 564.8 79072

of powder coating 50 micron)

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc.

with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings

and the directions of engineer-in-charge .

(Cost of aluminium snap beading shall be paid

in basic item):

21.3.2 With float glass panes of 5 mm thickness Sqm 4 1325.55 5302.2

(weight not less than 12.50 kg/sqm)

21.17 Providing and fixing anodised aluminium grill Kg 15 560.85 8412.75

(anodised transparent or dyed to required

shade according to IS: 1868 with minimum

anodic coating of grade AC 15) of approved

design/pattern, with approved standard

section and fixed to the existing window frame

with C.P. brass/ stainless steel screws @ 200

mm centre to centre, including cutting the grill

to proper opening size for fixing and operation

of handles and fixing approved anodised

aluminium standard section around the

opening, all complete as per requirement and

direction of Engineer-in-charge. (Only weight

of grill to be measured for payment).

22.0 WATER PROOFING

AMBALA DIVISION-ENGG/NORTHERN RLY

22.14 Grading roof for water proofing treatment with

61 sand : 4 graded stone aggregate 20mm

26.0 NEW TECHNOLOGIES AND MATERIALS

Providing and fixing false ceiling at all heights

with integral densified calcium silicate

reinforced with fibre and natural filler false

ceiling tiles of Size 595x595mm of approved

texture, design and patterns,as per CPWD

Specification 2019, to be laid in true horizontal

level suspended on inter-locking metal T-Grid

of hot dipped galvanised iron section of

0.33mm thick (galvanized @ 120 grams per

sqm including both sides) comprising of main-

T runners of size 24x38 mm of length 3000

mm, cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T

of size 24x32 mm of length 600mm to form

grid module of size 600 x 600 mm, suspended

from ceiling using galvanised mild steel items

(galvanizing @ 80 grams per sqm) i.e. 12x50

mm long dash fasteners, 6 mm dia fully

threaded hanger rod upto 1000 mm length

and L-shape level adjuster of size 76

x25x25x1.6 mm fixed with grid and Z cleat of

size 25x37x25x1.6mm thick with precut hole

on both 25mm flange to pierce into 12x50mm

or even bigger size dash fastener if require,

fixed with Galvanised iron perimeter wall

angle of size 24x24x0.40 mm of length 3000

mm to be fixed on periphery wall / partition

with the help of plastic rawl plugs at 450 mm

center to center and 40 mm long dry wall S.S

screws. The work shall be carried out as per

specifications, drawing and as per directions

of the Engineer-in-Charge.

26.22.1 With 15 mm thick tegular edged light weight Sqm 55 1777.5 97762.5

calcium silicate false ceiling tiles.