Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
20 Jan 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
60 days
Expenditure
General
RJT DIV.
3 conditions · 2 needing a document upload
We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of Contract (latest revision) and upon the terms of the Revised Special Conditions and Instructions for the Guidance of the Contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 12 of August 2018
Railways reserves the right to place order for entire/bulk quantity on firms who have successfully supplied same/similar items to any Railway /PUs for which documentary evidence must be furnished along with their offer evidencing execution of such the purchase orders
Authorized Dealer: Normally Railways prefer to deal with manufacturer. In case if manufacturer wants to submit offer through their authorized dealer, then Authorized dealer should submit tender specific valid authorization letter along with offer failing which their offer will liable to be passed over.
37 conditions
The Vendors are advised to fill "Compliance to special tender condition / Checklist" with each offer by specifically stating "yes" or "No" against each special condition / Checklist and in case of a "No" must fill reason for not agreeing with that special condition / Checklist in the remark entry box as provided therein.
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer are required to mention HSN Code of the offered goods and to quote correct applicable rate of GST. Tenderer will be solely responsible for correctness of the HSN code and the rate of GST for the offered goods
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 locations across Gujarat · 9 Set · 2 Numbers total
DIGITAL HEIGHT GAUGE / CASNUB Bogie gauges / trammeling gauge
87256227~WR
87256227
Open - Indigenous
Goods
Sabar Kantha, Gujarat
₹0
Exempted
20 Jan 2026
5 Jan 2026
6 items · 9 Set · 2 Numbers total
Supply of Sets of CASNUB Bogie gauges (Set of 18 gauges) as per RDSO Technical pamphlet no. G-95 with latest amend ment Rev.1 March 1997 (One set consisting of 18 gauges as per specification Attached Annexure-3) with calibration certificate. [ Warr anty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 2.00 Set |
| Total | 2 Set | |
DIGITAL HEIGHT GAUGE, Range 0 to 600mm specification as per annexure C. [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 2.00 Numbers |
| Total | 2 Numbers | |
Set of E type CBC Gauges consisting of 26 Nos as per the Annexure-1 enclosed and as per RDSO manual G-80.Make- Ga napathy, Paragon or similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 2.00 Set |
| Total | 2 Set | |
Gauges Used for Bogie LWLH 25 (G-112) STANDARD AS PER Annexure-2. MAKE: GANAPATHY OR SIMILAR. [ Warranty P eriod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 2.00 Set |
| Total | 2 Set | |
Gauges for inspection and Maintenance for LCCF-20(C) Bogie. 1. Pedestal jaw Gauge Qty-2 2.PedestalSide Gauge Qty-2 3.Pedestal Crown Roof Gauge-02 4.Slackness Draw Bar Not Go Gauge Qty-02 5.Side Bearer Arrangement Low Platform Container Bogi e Gauge No.1 Qty-02 6.Side Bearer Arrangement Low Platform Container Bogie Gauge No.2 Qty-02 7.Friction Shoe Wear Gauge Qty-02 8. Column Gauge Qty-02 9. Center Pivot Gauge No.1 Qty-02 10.Center Pivot Gauge No.2 Qty-02 11.Adapter Crown Lug Gauge Qty-02 1 2. Adapter Side Lug Gauge Qty-02 13. Adapter Side Gauge Qty-02 14.Gauge for Outer Spring of Bogie LCCF-20C Qty-02 15.Gauge for I nner Spring of Bogie LCCF 20 C Qty-02 16. Side Bearer Spring Gauge Qty-02 17. Filler Gauge 1 mm thickness & 12 inch Length Each st rip 25 strips Qty-05 18.Filler Gauge 0.5 mm thickness & 12 inch Length Each strip 25 strips Qty-05 [ Warranty Period: 30 Months aft er the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 2.00 Set |
| Total | 2 Set | |
Set of trammeling gauge for trammeling inspection of CASNUB 22 NL , NLB ,HS bogie with calibration certificate from NA BL approved lab. One set trammeling gauge is consisting of 1) Trammeling gauge with digital display with laser marker, measuring ra nge 3018 +/-4.50 mm, Qty-01 no. 2) Trammeling gauge with digital display with laser marker, measuring range 2260 +/-4.50 mm, Qty -01 no. of CASNUB bogies. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER (C&W) HAPA, WR | Gujarat | 1.00 Set |
| Total | 1 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .