SPL REPAIR/REPLACEMENT OF BER PUMP MOTORS AND CONNECTED WORKS AT MIL STN KOTA

Amount

Supply, install, commissioning, lowering and testing of Borewell Submersible pump motor set through OEM, electric driven 415 V, TP suitable for 200/250 mm dia bore well (casing pipe size 200/250 mm), head range 43-167 m, 1000-400 litre per minute (LPM) discharge, outlet size 80 mm, 13 Nos of stages suitable for star delta connection with and including fully automatic star delta starter suitable for pump with accessories like contractor, protection relay range 25-45 Amps, phase preventor etc and including lifting existing borewell submersible pump and deposit to AGE E/M (MES) yard complete all as specified and directed. Note :- (i) Model No. KS6F-2013 of kirloskar or equivalent Model of Make Crompton Greaves/ KSB/ Mather & Platt. (ii) Capacity of pump shall not be less than 20 HP.

Supply, install, commissioning, lowering and testing of borewell Submersible pump motor set through OEM, electric driven 415 V, TP suitable for 200/250 mm dia bore well (casing pipe size 200/250 mm), 112 mtr head, 1340 litre per minute (LPM) discharge at 53 m head, outlet size 100 mm, 10 Nos of stages suitable for star delta connection with and including fully automatic star delta starter suitable for pump with accessories like contractor, protection relay range 30-50 Amps, phase preventor etc and including lifting existing borewell submersible pump and deposit to AGE E/M (MES) yard complete all as specified and directed. Note :- (i) Model No. KS6J-2510 of kirloskar or equivalent Model of Make Crompton Greaves/ KSB/ Mather & Platt. (ii) Capacity of pump shall not be less than 25 H.P.

Supply, install, commissioning and testing of Monobloc openwell submersible pump set through OEM, electric driven 230 V, 3HP, head range 8-20 m and discharge 12.8-4.8 LPS including suitable star delta starter with phase preventor for pump motor complete all as specified and directed. Make : Model No KOS-318+ of Kirloskar or equivalent Model of Make Crompton Greaves/ KSB/ Mather & Platt.

Supply install, commissioning and testing of Monobloc pump set through OEM recommended foundation, electric driven 230 V, Single phase, 2 HP capacity, head range 10-55m and discharge range 6000-1500 LPH including suitable DOL starter for pump motor complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply install, commissioning and testing of Monobloc pump set , electric driven voltage range 180-260 V, Single phase, 1 HP capacity, head range from 6-39 m, insulation 'F' Class and discharge range 4920-1200 LPH including suitable capacity DOL starter complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply, install, commissioning and testing of openwell submersible pump set, electric driven 230 Volts, single phase 1 HP capacity, head range 19.5-30m, discharge 180-50 LPM, Copper wounded including suitable capacity DOL starter complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply and install and testing of pressure booster pump set, 1 HP, 0.75 KW pressure range (2.2-3.6) kg/cm2, auto ON-OFF system complete with accessories for fixing complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply install, commissioning and testing of self priming monobloc pump set , electric driven Voltage range 180-260 Volts , Single phase, 0.5 HP capacity, head range 6-28 m and discharge range 2600-650 LPH, Insulation : 'F' Class, Brass impeller & including suitable capacity DOL starter complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply, install, commissioning and testing of openwell submersible pump set, electric driven 230 Volts, single phase 0.5 HP capacity, head range 5-16 m, discharge 100-20 LPM, Copper wounded including suitable capacity DOL starter complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply, install, commissioning and testing of Monoblock openwell submersible pump set suitable for 415 V ,3 phase system having capacity 5 HP, head range 8 to 22 m and discharge 22.6 to 10 LPS, delivery pipe size 80mm and including fully automatic star delta starter suitable for pump with accessories like contractor, protection relay range 10-15 Amps, phase preventor etc complete all as specified and directed. Make :- Model No KOS520+ of Kirloskar or equivalent Model of Make Crompton Greaves/ KSB/ Mather & Platt.

Supply, install, commissioning and testing of Monoblock openwell submersible pump set through OEM suitable for 415 V ,3 phase system, head range 36 to 60 m, discharge 90 M head, 1140-825 litre per minute (LPM), outlet size 80 mm, suitable for star delta connection with and including fully automatic star delta starter suitable for pump with accessories like contractor, protection relay range 25-40 Amps etc complete having capacity 20 HP, complete all as specified and directed. Make :- Kirloskar/ Crompton Greaves/ KSB/ Mather & Platt.

Supply, fixing, testing and commissioning of Air Cooled diesel engine centrifugal pump set 6.5 BHP through OEM complete all as specified and directed.

Supply, fixing and testing of of Air Cooled diesel engine centrifugal pump set 5 HP capacity complete all as specified and directed.

Supply, fixing, testing and commssioning of Non clog vertical submersible sewage pumps through OEM, head range 8-18m, discharge 4750-280 LPM with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing and including lifting existing submersible sewage pump and deposit to AGE E/M (MES) yard complete all as specified and directed. Capacity of pump shall not be less than 12.50 HP. Make :- Model No 11000CW 4PL of Kirloskar or equivalent Model & Make of KSB/ Mather & Platt/WASP.

Supply, fixing, testing and commssioning of 7.5 HP, Non clog vertical submersible sewage pumps through OEM, head range 6-22m, discharge-1560-360 with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing and including lifting existing submersible sewage pump and deposit to AGE E/M (MES) yard complete all as specified and directed. Make :- Model No 5500CW of Kirloskar or equivalent Model & Make of KSB/ Mather & Platt/WASP.

Supply, installation, testing and commissioning chlorine pressure feed, high pressure single head gear motorised adjustable dozing pump- 0-100 PSI (Pressure upto 0-7 kg) Gear motored having output 2U.S GPD to 40 U.S. GPD, Power 230 V, 50 Hz, RPM-44 with accessories including lead tubing ,conncting nuts ,injection check valves,clay weight, GI pipe for water connection, ferrules and power connection to motor with required cabling and electric fittings such as 15A switch, sockets & boards etc., complete all as specified and directed

Supply and installation altoch dozing system consisting of 40 ltr-100 ltr PE/FRP tank with lid and level guage along with agitator with shaft and blade in SS-316 (FRP/Epoxy coated ) / plastic mounted on tank including necessary base foundation in PCC for mounting of dozing system complete all as specified and directed.

Supply and fixing PVC insulated and sheathed 1100 volts grade flat type submersible cable three core multi stranded conductor of size 6 Sqmm, ISI marked complete all as specified and directed .

Supply and fixing PVC insulated and sheathed 1100 volts grade flat type submersible cable three core multi stranded conductor of size 10 Sqmm, ISI marked complete all as specified and directed .

Supply and fixing of HDPE pipe of 80 mm dia, PE-63, having minimum withstand pressure 6 kg/cm2 and conforming to IS-4984: 1995 for submersible pump complete all as specified and directed.

Supply and fixing of HDPE pipe of 100 mm dia, PE-63, having minimum withstand pressure 6 kg/cm2 and conforming to IS-4984: 1995 for submersible pump complete all as specified and directed.

S&F of cast iron foot valves flanged end swing type operation with rubber seat as per IS-4038 of 50 mm bore, including nuts, bolts and washers etc complete all as specified and directed.

S&F of cast iron foot valves flanged end swing type operation with rubber seat as per IS-4038 PN-10 of 80 mm bore, including nuts, bolts and washers etc complete all as specified and directed.

Supplying, laying, jointing testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade of cross-sectional area 50 Sqmm, 3.5 core, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall complete all as specified and directed.

Supply & laying/fixing 80 mm bore steel water tubing, galvanised, medium grade with and including all fitting, fixed to walls, ceilings or laid in floors, complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables/pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed.

Removal of excavated surplus soil to distance not exc 50 Mtr and deposting where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply and laying column pipe 100 mm bore both end flanged made out of GI tubing medium grade welded at end of column pipe cutting of groove to house submersible cable 3 core length of each column pipe not exc 3.10 mtr complete all as specified and directed.

Supply and laying column pipe 80 mm bore both end flanged made out of GI tubing medium grade welded at end of column pipe cutting of groove to house submersible cable 3 core length of each column pipe not exc 3.10 mtr complete all as specified and directed.

Suply and fixing MS chain made of 6 mm dia rod of size 20mm x 38mm for holding submersile pump set/ column pipe including pipe including necessary holding (MS) clamp nuts, bolts etc. complete all as directed.

Supply and installing, connecting and testing of cast iron non return valve, 100mm bore, double flanged/built weld end bolted cover, swing check type, ISI marked, designed as per BS-1868, pressure rating PN 1.6, including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc, complete all as specified and directed.

Supply and installing, connecting and testing of cast iron non return valve, 150mm bore, double flanged/built weld end bolted cover, swing check type, ISI marked, designed as per BS-1868, pressure rating PN 1.6, including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc, complete all as specified and directed.

Supply and installed, connecting and testing of sluice valve, class PN 1.6 double flanged CI body, wheel and brass spindle and nuts, long body type, IS-14846, ISI marked including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc, complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.

M/s Prem Associates