PROVN OF OTM ACCN FOR STN HQ AT BINNAGURI MIL STN UNDER GE (NORTH) BINNAGURI

Amount

SCHEDULE 'A' PART-I (BUILDING & STRUCTURE)

Lump sum price worked out by the contractor for BUILDING & STRUCTURE (Provn of administrative bldg (double storey) in permanent RCC framed structure, ATT, mosquito proofing, roof treatment, seismic measure etc) as listed in Schedule ‘A’ Part-I of (Representing ___________% _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs.97,16,010.00 (INR Ninety Seven Lakh Sixteen Thousand &Ten Only) inserted by the MES in Schedule ‘A’ Part-I on Serial Page No. 22.

Lump sum price worked out by the contractor for BUILDING & STRUCTURE (Provn of storage accn block (single storey) in permanent RCC framed structure, ATT, mosquito proofing, roof treatment, seismic measure et) as listed in Schedule ‘A’ Part-I of (Representing ___________% _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 19,04,333.00 (INR Nineteen Lakh Four Thousand Three Hundred & Thirty Three Only) inserted by the MES in Schedule ‘A’ Part-I on Serial Page No. 22.

Lump sum price worked out by the contractor for BUILDING & STRUCTURE (Provn of a block of 04 garages (single storey) in permanent RCC framed structure, roof treatment, seismic measures including provn of apron for vehicle etc. complete all as specified and shown on drawing/design) as listed in Schedule ‘A’ Part-I of (Representing ___________% _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 16,30,556.00 (INR Sixteen Lakh Thirty Thousand Five Hundred & Fifty Six Only) inserted by the MES in Schedule ‘A’ Part-I on Serial Page No. 22.

SCHEDULE 'A' PART-II (EARTH WORK AND EXCAVATION EXCLUDING BUILDING & STRUCTURE)

Lump sum price worked out by the contractor for EARTH WORK AND EXCAVATION as listed in Schedule ‘A’ Part-II of (Representing ________________% ________ _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 2,68,806.27 (Rupees Two Lakh Sixty Eight Thousand Eight Hundred & Six and Paise Twenty Seven Only Only) inserted by the MES in Schedule ‘A’ Part-II on Serial Page No. 23 to 24.

SCHEDULE 'A' PART-III (ROAD PATH AND CULVERT)

Lump sum price worked out by the contractor for ROAD PATH AND CULVERT as listed in Schedule ‘A’ Part-V of (Representing ________________% ____________________ Persentage) @ ABOVE/ BELOW the lump sum price of Rs. 10,37,172.88 (Rupees Ten Lakh Thirty Seven Thousand One Hundred & Seventy Two and Paise Eighty Eight Only Only) Serial Page No. 25 to 28.

SCHEDULE 'A' PART-IV (AREA DRAINAGE)

Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-III of (Representing ________________% ____________________ Persentage) @ ABOVE/ BELOW the lump sum price of Rs. 5,43,430.39 (Rupees Five Lakh Forty Three Thousand Four Hundred & Thirty and Paise Thirty Nine Only Only) Serial Page No. 29 to 30.

SCHEDULE 'A' PART-V (INTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-VII of (Representing ________________% ______ _______________Percentage) @ ABOVE/BELOW the lump sum price of Rs. 7,70,670.91 (Rupees Seven Lakh Seventy Thousand Six Hundred & Seventy and Paise Ninety One Only Only) inserted by the MES in Schedule ‘A’ Part-VIII on Serial Page No. 31 to 38.

SCHEDULE 'A' PART-VI (EXTERNAL ELECTRIFICATION)

Lump sum price worked out by the contractor for (EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-VIII of (Representing ________________% ________ _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 58,397.70 (Rupees Fifty Eight Thousand Three Hundred & Ninety Seven and Paise Seventy Only Only) inserted by the MES in Schedule ‘A’ Part-IX on Serial Page No. 39.

SCHEDULE 'A' PART-VII (SEWAGE DISPOSAL)

Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI of (Representing ________________% ________ _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 76,054.10 (Rupees Seventy Six Thousand &Fifty Four and Paise Ten Only Only) inserted by the MES in Schedule ‘A’ PartVII on Serial Page No. 40 to 41.

SCHEDULE 'A' PART-VIII (EXTERNAL WATER SUPPLY)

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV of (Representing ________________% ________ _____________ Percentage) @ ABOVE/BELOW the lump sum price of Rs. 20,451.96 (Rupees Twenty Thousand Four Hundred & Fifty One and Paise Ninety Six Only Only) inserted by the MES in Schedule ‘A’ Part-IV on Serial Page No. 42.

SCHEDULE 'A' PART-IX (STEEL GATE AND FENCING)

Lump sum price worked out by the contractor for STEEL GATE AND FENCING as listed in Schedule ‘A’ Part-V of (Representing ________________% ____________________ Persentage) @ ABOVE/ BELOW the lump sum price of Rs. 4,59,224.87 (Rupees Four Lakh Fifty Nine Thousand Two Hundred & Twenty Four and Paise Eighty Seven Only Only) Serial Page No. 43 to 46.

SCHEDULE 'A' PART-X (MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (TO BE QUOTED BY CONTRACTOR))

M&L for construction of valve pit of internal size 60 cm X 60 cm X 60 cm with one brick thick brick masonry wall in cement mortar (1:4), PCC foundation 10cm thick (1:4:8) type D-2 with 15cm offsets, PCC copping 5 cm thick (1:2:4) type B-1, plastering 15mm thick in cement mortar (1:4), 50X50X4mm angle iron frame and 3mm thick MS sheet cover with locking arrangement including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer and necessary excavation and earth work including dismantling of existing one complete all as specified and directed complete all as per specified and as directed by Engineer-in-charge.

M & L for horizontal boring across the existing road without disturbing the road surface for inserting up to 50 mm GI pipe, Complete all as specified and directed by Engineer-in-Charge. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit rate. (ii) GI pipe will be measured and paid respective item under relevant item of this schedule.

M&L for 2.5 mm thick painting to road surfaces as in lines, dashes, arrows, letters , zebra crossing etc on roads, pavements and like with thermoplastic road marking paint @ 5 kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfaces while the painted surfaces are hot by mechanical means including cleaning surfaces, complete all as specified and directed by Engineer-in-charge. (Note. The painting shall be carried out through mechanical appliances by the company's approved applicator).

S&F 18 W LED tube light set with sensor illumination control circuit (reducing to 25% illumination on no-motion), 4 ft long, made of Aluminium body with PC Milky diffuser, IP-20 of colour temperature 6500K with special features of microwave motion sensor covering sensing range of upto 6 mtr radial distant at corridor with all necessary fittings and testing, complete all as specified and directed by Engineer-in-charge.

S & F decorative mirror light with LED inbuilt driver of 12 W, of colour cool white made of Aluminium die cast white body with IP 20, complete all as specified and directed by Engineer-in-charge.

S&F surface panel round lights of 30W of dimension Ø 300mm x 35mm including inbuilt driver, housing & finish made of Aluminium die cast & PC diffuser, colour- cool white, 230 Volt, complete all as specified and directed by Engineer-in-charge.

S&F surface panel round lights of 18W of dimension Ø 240mm x 35mm including inbuilt driver, housing & finish made of Aluminium die cast & PC diffuser, colour-cool white, 230 Volt, complete all as specified and directed by Engineer-in-charge.

S & F LED focus lights 12 W, with beam angle of 36 degree, 230V, pf > 0.95 with surge protection of 4KV made of die cast aluminium white/black body with 360° rotation mounted on track, complete all as specified and directed by Engineer-in-charge.

S & F channel of length 1mtr (each length) including necessary connector of white colour suitable for mounting of tract focus light, complete all as specified and directed by Engineer-in-charge.

S&F of modular TV socket outlet 1 module with sheet metal box and top plate, complete all as specified and as directed by Engineer-in-charge.

S&F of modular RJ11 telephone jack socket 1 module with shutter & Sheet metal box and top plate, complete all as specified and as directed by Engineer-in-charge.

M&L for laying concealed conduit pipe medium grade 25 mm dia suitable for drawing TV cable with all fittings and accessories such as Tee, bend, junction box, etc, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing MCB blanking Plate for fixing at empty space of MCB Distribution board, complete all as specified and as directed by Engineer-in-charge.

S & F exhaust fan 300 mm sweep MS body with antidust painting, 3 blade with motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery- 1600 CMH complete with all accessories as bird guard/louvers shutters etc incl making connection with 3 core flexible multi strander copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM (1:4) and finishing the surface as per existing colour scheme complete all as specified and as directed., complete all as specified and as directed by Engineer-in-charge.

MS SHRI B.C. DAS