Construction of Guest House, Inspection Bungalow G2 building at Tiabon in the District of Jalpaiguri- Special Electrical Installation Works.

Amount

Fan Fittings & other accessories Supply & Fixing 18", 450 mm Metal Body AC wall bracket fan (Orient: Wall-II Tornado/Havells or Approved by EIC) on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) on 150mmX300mm best quality vernished wood or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [PWD/GS Page: C-4 Item: 29 ]

S&F EPC make 9" Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

S&F EPC make 12" Heavy Duty Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

Supply & Fixing 48" (1200mm) AC ceiling fan make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of UHSA/HAVELLS or approved by EIC) complete with down rod, canopy fork, blades with all other accessories etc. but without regulator. [PWD/GS Page: C-3 Item: 21/a] Supply & fixing additional safety arrangement of ceiling fan by stranded GI strain wire of suitable gauge with one end fixed at RC clamp with special type of socket, nut-bolts, thimbles which throughly crimped with the strain wire and the wire passing through down rod (for upto 8 ft) and also other end connected with armature spindle by its existing jam nut hole with special arrangement (sample approved by EIC). The length of the strain wire up to 9ft also considering any type of work required i.e. enlarging the existing hole by file etc. to complete the job including installation as per direction of EIC (Static & Dynamic Load Test (in rotation of 1:20) certificate must be provided with final bill jointly with concerned Junior Engineer & authorised Electrical Supervisor of Agency).

S&F single 4ft LED tube light fitting incl. 4ft LED tube (LTT8-20), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Crompton: IGP131LT8-16 or Equivalent of Philips or Havells/ Nordusk/ C&S] [PWD/GS Page: C-2 Item: 17]

S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube lamp (LTT8-20), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Crompton: IGP132LT8-16 or Equivalent of Philips or Havells/Nordusk/ C&S] [PWD/GS Page: C-2 Item: 17]

S&F of 312mmX312mm 15W LED cirrus Mini Pro surface mount light fitting complete with all accessories suspended from ceiling with all accessories [Philips: SM200C LED11S 6500 PSU OD WW or Equivalent of Havells, Crompton]

S&F of Philips Sleek SurfaceLED Downlight Square complete with all accessories suspended from ceiling (Philips: SM250C LED12S-6500 PSU WW or Equivalent of Havells, Crompton/Nordusk/ C&S approved by EIC)

S&F of Philips Bed side LED light 3 Watt 3000K complete with all accessories from wall (Philips: 48042/30/30 color Black or Equivalent of Havells, Crompton approved by EIC)

S&F of Philips Sleek Surface LED Downlight Square complete with all accessories suspended from ceiling (Philips: SM250C LED7S-6500 PSU WW or Equivalent of Havells, Crompton /Nordusk/ C&Sapproved by EIC)

Supply & fixing of Wall light fittings (mirror light) adjustable type 6W LED Picture Light complete with all accessories fixed at wall as per direction of EIC. (Philips: 30973IN91 or equvalent: Crompton or Equivalent of Havells)

Supply & Fixing of 10W LED Lamp. Havells or Equivalent of Philips or Crompton )

Compound Light or Security Light Supply & fixing Sintex loop box of size 250 x 200 x 105 (Syntex: GSJB-2520) with half round clamp on pole and supply & fixing a best quality 32A, 2-pole barrier terminal and 6A SP MCB inside it including all accessories.

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (KEI /Gloster / Havells / Approved by EIC)

2 core 10 sq. mm.

4 core 16 sq. mm.

4 core 25 sq. mm

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 2X10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [PWD/GS Page: F-1 Item: 2/b] Laying of one No. cable upto 35 sqmm [PWD/GS Page: F-2 Item: 1/a]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. Laying of one No. cable upto 35 sqmm [PWD/GS Page: F-2 Item: 1/a]

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. [PWD/GS Page No.: F-4 Item No.: 7/c]

2 core 10 sq. mm.

4 core 16 sq. mm.

4 core 25 sq. mm

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. [PWD/GS Page No.: F-5 Item No.: 8/b]

2 core 10 sq. mm.

4 core 16 sq. mm.

4 core 25 sq. mm

Distribution wiring in 1.1 KV 2x36/0.3 (2.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 19mm size polythine pipe incl. necy. fittings as required [equivalet to PWD/GS Page: E-2 & E-9 Item: 1 &1]

Supply & fixing of single arm header assembly made with 100mm dia GI pipe Jacket of 30cm long with 1.5 mtr. long 40mm dia GI pipe bracket duly welded with top cap at an angle of 110 degree with the vertical incl. 12 mm dia full threaded through nuts-bolts and 3 nos. supporting nut-bolts etc. including necessary painting as per direction of EIC.

S&F medium gauge 25mm dia HDPE Pipe Protection with necessary fittings as required.

Supply & delivery of 7mtr Height octagonal pole (make Calcutta poles/Bajaj/Utkarsh).

Erection of Single 7 Mtr. Long heavy gauge powder coated Decorative/ Ornamental Pole with sole plate & foundation bolt in CC foundation having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with Cement concrete (1:1.5:3) with well graded stone chips (20 mm graded nominal size) foundation/muffing of size 400x400x600 with proper placing of sole plate & foundation bolt as per guideline of pole making company and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.

Supply delivery & errection Garden Spike Outdoor Ambient Light fitting complete set made with high quality alluminium having 7W LED. (Philips: Garden spike-31385-Anthracite or Equivalent of Havells, Crompton approved by EIC)

Supply & fixing of LED street light 90W ( Make- Phillips/Havells/Nordusk/C&S).

Supply & fixing of LED security light 45W (Make- Phillips/Havells/Nordusk/C&S).

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire, with an average depth of 3.65 Mts. below the ground level (For soft Soil: ISI-Medium GI pipe) [PWD/GS Page No.: G-1 Item No.:2/a]

Excavation of soil for installation of Earth Electrode and filling & ramming. (Soft Soil) [PWD/GS Page: G-1 Item:1]

Connecting the equipments body to earth busbar including S&F galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat [PWD/GS Page:G-3 Item: 5/c]

Connecting the equipments to earth busbar including S & F 4SWG GI (Hot Dip) wire of size. [PWD/GS Page:G-2 Item: 5/a] S & F 6 SWG GI (Hot Dip) wire of size.

Feeder Pillar Box Feeder Pillar Box 1: Supply & errection of feeder piller box of 1200X1100X400 mm with Iron leg of 40X40X5mm having front and back opening hinged with door handle & panel locking arrangement it should have suitable size 2mm thick MS sheet at bottom of feeder pillar for cable glanding work and two nos. earth bus in two side wall of feeder pillar with shorting the cable glanding MS plate. The feeder pillar should be errected over suitable brick structure with plaster & neat cement finish as per direction of E.I.C. And interconnections for: 63A FP MCB is 40X5sqmm copper bar, & for 32A DP MCB is 16sqmm copper wire.

Supply and fixing of 15 ltr. Capacity Vertical Geyser (V Guard Model- IRISH-10 Ltr Digital) with incoming and outgoing pipe as per direction of EIC

Supply and fixing of TV Co- axial socket (Legrand make Cat No. 573425) with 1/2 module metal flush box with white 2 module as per direction of EIC.

LC S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1). (PWDE GS Page: J-1 Item: 1)

Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint (PWDE GS Page: J-1 Item: 2)

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works. (PWDE GS Page: J-1 Item: 9)

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work. (PWDE GS Page: J-1 Item: 11a)

Supply & fixing 30mm heat sinkable sleeve on GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal & vertical run.

Supplying & Fixing high quality Porceilain chair (Earth Bus support) of size 25mm breath& 30mm height including fix up of 8mm 2nos bullet on both side and 3" all thereded nut & bolt with 2 nos GI washer suitable on top middle portion for fixing 20X3mm GI Streep on wall (horizontal & vertical run) of the building as per direction of EIC.

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required. (PWDE GS Page: J-2 Item: 13)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire, with an average depth of 3.65 Mts. below the ground level (For soft Soil: ISI-Medium GI pipe) [PWD/GS Page No.: G-1 Item No.:2/a]

Excavation of soil for installation of Earth Electrode and filling & ramming for morrum soil. (PWDE GS Page: G-1 Item: 1a)

Extra for treatment of soil by using salt & charcoal or coke for plate electrode (PWDE GS Page: G-2 Item: 3b)

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe (PWDE GS Page: G-2 Item: 3a)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (PWDE GS Page: G-2 Item: 4b)

GHANASHYAM ELECTRIC STORES

MESSRS BHOWMIK AND CO