Construction Of Type III(02) Residential Building At Block Campus in Bhaisiyachhana. Distt Almora.

Amount

Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5 m, i/c disposal of surplus excavated soil within a lead of 50 m.

P/L in position CC 1:4:8 (1 Cement : 4 c/sand : 8 st. agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level.

RR stone masonry with hard stone in foundation and plinth i/c levellingup with CC 1:6:12 (1 cement: 6 coarse sand : 12 stone agg. 20mm size) at plinth level with cement mortar 1:6 (1 cement : 6 c/sand).

P/L in position RCC 1:1.5:3 (1 cement : 1.5 c/sand : 3 stone agg. 20 mm size) ex. the cost of c/shuttering, finishing and reinf. - All work upto plinth level (in foundation).

RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) in walls (any thickness), plinth and string courses, columns, pillars, piers, abutments, posts & struts etc. upto floor five level ex. cost of c/shuttering, finishing and reinf.

Same as above but RCC 1:1.5:3 in beams,lintels,S/S & suspended floors.

Centering and shuttering i/c strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering i/c strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering i/c strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering i/c strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Reinforcement for R.C.C work i/c straightening cutting bending placing in position and binding all complete- Thermo Machanically treated bars.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 c/sand).

Brick work with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:6 (1 cement : 6 c/sand).

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 c/sand).

Half brick masonry with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement :4 c/sand)

12 mm cement plaster of mix. 1:3 cement and fine sand mortar with neat finish.

12 mm cement plaster of mix. 1:6 cement and Course sand mortar.

Filling available excavated earth in trenches, plinth in layers consolidating by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Making plinth protection 50mm th. of CC 1:3:6 (1 cement : 3 c/sand : 6 stone agg. 20mm size) over 75mm bed of dry brick ballast 40mm size well rammed i/c finishing the top smooth.

P/F glass strips in joints of terrazo/ CC floors. -- 40 mm wide and 4 mm th.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

P/F M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints mitred and welded and grinded finish profiles required size with 15x3mm lugs 10cm long embedded in CC blocks 15x10x10cm of 1:3:6 necessary butt hinges and screws and applying a priming coat of approved steel primers.

P/L vitrified floor tiles in 60x60 cm. size of approved make in all colours and shades, laid on 20mm th. cement mortar 1:4 (1 cement: 4 c/sand) i/c grouting the joints with white cement and pigment etc.

P/L vitrified floor tiles in 60x60 cm. size in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.1 Size of Tile 500x500 mm sqm of approved make in all colours and shades, laid on 20mm th. cement mortar 1:4 (1 cement: 4 c/sand) i/c grouting the joints with white cement and pigment etc.

P/L Ceramic glazed floor tiles 300x300 mm 1st quality of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm th. cement mortar 1:4 (1 Cement : 4 c/sand) i/c pointing with white cement and pigment etc.

P/F 1st quality ceramic glazed wall tiles of approved make in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados over 12 mm th. bed of cement mortar 1:3 (1 cement : 3 c/sand) and jointing with grey cement slurry i/c pointing with white cement and pigment.

P/F 35 mm th. ISI marked flush door shutters i/c butt hinges with necessary screw non-decorative type.

P/L in position CC 1:2:4 (1 cement : 2 c/sand : 4 stone agg. 20 mm size) in bed blocks etc.excluding the cost of c/shuttering upto floor five level.

P/F on wall face unplasticised Rigid PVC RW pipesi/c jointing with seal ring single socketed pipes --110 mm dia.

P/F on wall face unplasticised Rigid PVC RW pipesi/c jointing with seal ring single socketed pipes --75 mm dia.

P/F PVC moulded fittings/ accessories PVC Shoe (Plain) for wall face unplasticised Rigid i/c jointing with seal ring single socketed pipes --110 mm dia.

P/F 110 mm unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.-110 mm dia.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of app.brand (two or more coats) to give an even shade on new work over and i/c priming coat with cement primer.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (Two or more coats) applied over an under coat of primer approved brand.

Painting wood work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.

Painting Steel work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.

P/F 4 mm thick float glass panes i/c all complete of work

P/F ISI marked alluminium sliding door bolts anodi coating not less thengrade AC 10 as per IS:1868 transperent or colour or shade with nuts and screw etc complete250x16

P/F ISI marked alluminium tower bolt anodised (a not less then grade AC 10 as per IS:1868) transperent or colour or shade with nuts and screw etc complete250x10

P/F ISI marked alluminium Hanndles anodised (a not less then grade AC 10 as per IS:1868) transperent or colour or dyed to req less then grade AC 10 as per IS:1868) with necessary screws etc complete:125 mm

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge

Providing and fixing water closet squatting pan of size 580x440mm with foot resta. (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

providing and fixing white vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar tap.

providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

provding and fixing stainless steel AISI 304(18/8) Kitchen sink with drain board 510x1040 mm bowl depth 225mm

providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. flexible pipe 32mm dia.

providing and fixing mirror of Superior glass (of approved quality) and of rectangular shape 453x357mm

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88mm, weighing not less than 170 gms.

Providing and fixing 15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

providing and fixing G.I. pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall 15 mm dia. Nomminal bore.

providing and fixing G.I. pipes complete with G.I. fittings including trenching sna refilling etc. (external work) 20 mm dia. Nominal bore.

providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) 20 mm nominal bore.

providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS: standards and weighing not less than 810 gms. 15mm nominal bore.

providing and fixing C.P. brass angle valve for basin mixer and geyser points of appoved quality conforming to IS: 8931 15mm nominal bore.

providing and fixing PTMT grating of approved quality and colour Circular type 100mm nominal dia.

P/F 18 mm th. mirror prepolished & premoulded Granite of any colour and shade Area of slab over 0.50 sqm sqm for kitchen platforms, vanity counters ,window sills, facias and similar locations of req. size laid over 20mm th. base of cement mortar 1:4

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

providing and placing on terrace (at all floor levels) polyethylene water storage tark ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing With 12 mm mild steel U beading fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete

Providing and laying factory made 60mm thick cement concrete paver block of M-35 grade chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made bytable vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.1 with approved colour, design & pattern.

Excavation in foundation for retaining & breast walls in all types of soils and rocks i/c lead, lift and disposal of surplus material.

RR stone masonary laid in 1:6 cement and sand mortar in breast, retaining walls etc. i/c supply of all materials, labour, T&P and royalties etc.

HP stone filling in back of walls i/c supply of all materials, labour T&P etc. required for proper completion of work.

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Sher Singh

R K Builders & Contractors

Ganesh Mehta