Provision of Internal and External Electrical Arrangements to the Additional ward in First Floor of OP Building in Government Hospital at Kodumudi in Erode District

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of 9W LED Bulb and Battern Holder for BH point

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48") sweep BLDC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clamp.

Supply and fixing of 300mm (12")sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia GI pipe (class B) with 1no. 32mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 3Nos. 6A two module 5pin socket, 3nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End.

Supply and fixing of 1No. 6/16A two module socket, 1no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 3Nos.6A two module socket , 1 no. 16A two module socket , 3 nos. 6A one module switch , 1 no. 16A one module switch with module cover plate (Plastic) on suitable module surface mounting Box (GI ) in flush with with connections. Higher End.(In Various Ward)

Supply and fixing of 20Amps flush wall socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection.[For AC Plug]

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of Vertical type 8 way triple pole neutral MCCB DB in sheet steel enclosure double break metal cover with IP 42 protection with 1No. 125A FP MCCB Switch as incoming 8Nos. 63A TP MCB as outgoing in flush with wall with earth connection only. The MCB DB and MCB's should be with the ISI mark .

Supply and fixing of 7Segment 4way TPN MCB Sheet Steel Distribution Board with metal/acrylic door cover flush type / surface type fitted with busbars and neutral links with single or three phase MCB outgoings and seperate 4way provision for accomodating 1No 4Pole incoming MCB/Isolator and another seperate 4Way provision for accodating 1No. 4Pole ELCB/RCD (Totally 8ways in one segment)(3x4 ways in each segment )and seperate provison for MCB/Isolators (Totally 12 Nos) for sub incomers in 3 segments with label holder an provison for taking of cable for size not less than 35 sq.mm with the following in flush with wall earth connection only. 1) 63A 4P MCB - 1No 2) 63A 4P 30MA RCCB/ELCB-1No 3) 63A DP MCB Isolator - 3Nos 4) 6A to 32A SP MCB - 12Nos

Supply and fixing of 7Segment 6way TPN MCB Sheet Steel Distribution Board with metal/acrylic door cover flush type / surface type fitted with busbars and neutral links with single or three phase MCB outgoings and seperate 4way provision for accomodating 1No 4Pole incoming MCB/Isolator and another seperate 4Way provision for accodating 1No. 4Pole ELCB/RCD (Totally 8ways in one segment)(3x4 ways in each segment )and seperate provison for MCB/Isolators (Totally 12 Nos) for sub incomers in 3 segments with label holder an provison for taking of cable for size not less than 35 sq.mm with the following in flush with wall earth connection only. 1) 63A 4P MCB - 1No 2) 63A 4P 30MA RCCB/ELCB-1No 3) 63A DP MCB Isolator - 3Nos 4) 6A to 32A SP MCB - 18Nos

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm .PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in all and ceiling with continuous earth wire connection of 4sq.mm coppe rwire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 4 sqmm PVC insulated SC unsheathed FRLS Copper wire Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 Sq.mm Copper wire and making good of the concealed portion with suitable colour. (For 4P MCB Switch)

Supply and run of 4 of 16 sq.mm.PVC insulated FRLS Copper wire unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 Sq.mm Copper wire with painting of suitable colour. (For 4W 7S TPNMCB DB and Lift Main Switch-2Nos)

Supply and run of 4 of 25 sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V grade in suitable PVC rigid pipe concelaed in wall and ceiling with continuous earth wire connection of 25Sq.mm Copper wire and making good of the concealed portion with painting of suitable colour.

Supply and fixing of 32A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher End make) (For Motor Switch)

Supply and fixing of 200A TPN Double break switch with HRC fuse and neutral on suitable angle iron frame work With earth connection only. (For Supply Point)

Supply and fixing of TNEB meter board suitable for 3phase 200A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12 mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 200A fuse units (500V), 1No. neutral link, copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse units by 16sq.mm PVC insulated copper wire with earth connection complete.

Supply and fixing of 3 phase 200 A aerial fuse unit for 3Nos. 200A fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps.

Supply and Laying of 3 ½ x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and clamping of 3½ x 150 sq.mm PVC LTUG armoured LTUG cable armoured Pipe on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 150 sq.mm PVC armoured LTUG cable, with earth connection.

Supply and providing cable end termination of 3½ x 150 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply erection testing commissioning of 2.00TR (6000 KCal/Hr) ABS Plastic split type Air Conditioner confirming to IS1391[Part 2] 1992 with Rotary compressor operating on refrigerant R-22/Non CFL suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three Star rating as per BEE Specification and capable of performing the following functions. A) Cooling, B) dehumidifying C) Air circulating D) Filtering the installation work for the above split type AC units includes the following. 1. Mounting /fitting indoor and outdoor units at their respective locations. 2. Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm 3. Insulating the suction pipe with expanded polythene foam 5mm thick tubing. 4. Laying 15mm dia flexible PVC drain pipe of 6mtrs length to throw out the condensate water being formed in the indoor unit. 5. Leak testing the entire gas unit. 6. Charging refrigerant gas in the unit. 7. suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit.

Supply and fixing of 5KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply

Supply and laying of 5/8'' and 3/8'' copper pipe (Extra beyond 3Mtrs supplied with AC Unit)

Supply and fixing of MS Stand for fixing angle iron stand for outdoor unit.

Supply and fixing of water drain line (1'' PVC Pipe) (For Split AC Unit)

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1No. 26 persons 1768kgs. Capacity Passenger cum Bed Lift (Gearless) With out Machine Room as per the following specifications. 1. Location : Govt Hospital at Kodumudi 2. No. of Lift : One No 3. Type of Lift : Passenger cum Bed Lift with machine room - Gearless model 4. Capacity of Lift : 26 Persons / 1768kgs 5. Speed : 1.0 mtr / sec 6. Type of Drive : V3F Drive with enhanced ride comfort and near Zero Level Functions. 7. No. of Floors : Ground floor + 1 Floor 8. Total Travel : 7.2 Mtr / Pit 1800mm / Head room 4800mm 9. Leveling accuracy : High level accuracy with smooth and jerk free stopping. 10 Construction of Lift well : RCC with brick masonary/ Brick well. 11.Car : 1.5mm hairine finish High Quality S.S. Car and Hand rail, Granite flooring and Stainless steel False Ceiling. 12 Position of Machinery : Directly above the Lift well – Gearless with machine room. 13 No. of Landings : 2Nos in the front side. 14 No. of Car Entrance : One in the front side. 15 Car Entrance : Power operated V3F Drive, side opening Sliding Stainless Steel (1.5mm) Hairline finish door. 16 Landing Entrance door : side opening Sliding Stainless Steel (1.5mm) hairline finish door with provision for Emergency Exit key at All landings. 17 Lift well : 2400mm (Wide) x 3000mm (Depth) as per IS 14655(Part 1) 2000. Lift shaft available. 18 Lift Pit : 1800mm (to be constructed) Depth.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and run of 3 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed FRLS Copper .Conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14SWG TC wire with painting of suitable colour. (For Lift Well Light Control)

Supply and fixing of 16A Two-way switch in suitable Modular type GI box on wall with suitable front cover plate with connection (Higher End) (For Lift well lighting Control)

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 module weather proof enclosure in flush with wall and making good of the concealed portion with earth connection (Higher end). (In Lift Machine Room)

Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (In Lift Machine Room)

Supply, testing, commissioning and handing over of 1No, 40KVA Diesel generator set of 0.8PF, 3phase, 415/ 420Volts, 50Hz, 1500 RPM CPCB IV + Norms and BIS Specifications. A) ENGINE : Water cooled diesel engine suitable for generator application with a shaft out put of 56BHP suitable at 1500 RPM under NTP conditions . The engine shall comprise the following standard scope of supply: 1) Dry type Air cleaner 2) Expansion bellow 3) Radiator, radiator fan and mounting 4) Air to air charge cooler 5) Exhaust gas turbo charger 6) Lube oil cooler and lube oil filter 7) Fuel filter (pre and micro) 8) In-line mono-block fuel injection pump with governor and fuel feed pump 9) Electronic governor 10) 12V / 24V battery charging alternator 11) 12V / 24V Volt electric starter motor 12) Engine test certificate 13) Residential Mufler 14) Fly wheel with starter ring. Engine instrument panel/mounting: Engine control panel consisting of ON/OFF/START/KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator. Safety system of Engine: The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure 2) High water temperature 3) Vee - belt failure and over speed 4) Low battery indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.

Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation.

Erection of Gen set: Providing suitable concrete foundation with cement concrete 1:2:4 with a mainmum height of 3 feet from the floor level with sand cushion all around the foundation for erection of 40KVA Diesel Generator set over the existing fountation and erection of generator set with proper alignment over the existing fountation.

Supply and demonstration of the following safety accessories. a) 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS.-5Nos b) Fire Buckets made out of 40 x 40 x 6mm MS Angle -4Nos c) First Aid Box complete with all First Aid Medicines-1No d) 11 kV rubber hand gloves - 2Nos. e) Shock Treatment chart in Tamil and English -1No f) Earth discharge rod -1No (g) PL Lamp

Preparation of site plan,physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG preparation of completion report, rectification report and arranging CEIG inspection and obtaining safety certificate preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in generator room and payment of CEIG inspection fees.

Supply and Laying of 3 ½ x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (In 40KVA New Gen.Old Gen Set & 40KVA Old Gen.Old Gen Set Cable )

Supply and Laying of 3 ½ x 50 sq.mm. PVC armoured LTUG cable in suitable size 50mm''GI pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and clamping of 3 ½ x 50 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 ½ x 50 sq.mm PVC armoured LTUG cable, with earth connection.

Supply and providing cable end termination of 3 ½ x 50 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/ supports on wall/ floor/ ground for earth connection.

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Please Enable Macros to View BoQ information