SPECIAL REPAIR TO BLDG NO SP-62 OF CWE (A) AHMEDABAD AND PROVISION OF ATTACHED TOILET FOR ASSISTANT RECRUITING OFFICER AT ARO UNDER GE (A) AHMEDABAD

Amount

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium anodised powder coated door single/double shutter with frame size 100 x 44 x 1.98 mm with one or more rebate and shutter pull and push type or side hung type ( with or without shah bar) comprising of top and lock rails of section 115 x 44 x 1.98 mm thick , bottom rail of section 150x44x1.98 mm thick and styles of section 85x 44 x 1.98 mm thick including necessary joiting cleats , glazing clips , rubber packing anodised aluminum beading , screws , anodised aluminum fittings such as floor springs or hinges 100 mm size with hydraulic door closer , handles D type 125 mm , floor door stopper, tower bolt 200 mm sliding door bolt 300 mm or mortise lock , 5 mm thick tinted glass panes top and prelaminated particle board bottom including making good wall surfaces etc. complete all as specified and directed.

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass incl necessary channel frame work, including rubber gasket and and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified.

S&F mild steel angle iron work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. Fe290 (Gde-E-165)

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed & directed

S&F solid PVC door/ cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic coloured tiles double charged light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed withneat cement slurry and pointed with 3 mm pvc spacer filled with epoxy joint filler to match the sahde incl 15mm thick Screed bed in CM 1:4 complete all as specified and directed.

All as per item No 13 above but on Vertical Surfaces with incl 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for Non Skid joint free ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat CM 1:3 complete all as specified and directed.

M&L for wall cladding tiles for external surface incl 10mm thick backing coat CM 1:3 complete as specified and directed by Engineer in charge.

M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3) including rounding of all exposed edges complete all as specified and directed.

M&L machine pressed pre-cast concrete rubber moulded coloured, prepolished interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.

M&L Sand filling under floor/over floor or in foundations including well ramming complete all as specified and directed.

Dismantling wall and celing board , including frame work any description fixed in any position complete all as specified and directed.

S&F 4mm thick coloured textured designer ceiling board (Everest) of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete with material,fixing, jointing etc complete all as specified and directed. ( Make:- METROC or METACIL or any other equivalent make as approved by GE.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in, levelling coarse in sub base complete all as speificed and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for rendering on other than fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @2 % by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and fair without using extra cement complete all as specified and directed.

M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral waterproofing compound complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

Demolition of cement concrete unreinforced concrete in ground floors and pavings and for where directed.

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed in walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed in walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting existing tanks exc 500 but not exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).

S&F in repair Ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, 20mm bore, fixed in repair complete all as specified and directed.

S&F in repair stop cock / angle cock 15mm cast copper alloy,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair stop cock 15mm cast copper alloy concealed type ,screwed down, with chromium plated fancy type high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repairs 10 litre capacity PVC flushing cistern, valve less symphonic type low level or high level with inlet, ball valve float chains pull and brackets complete with flush pipe 32mm dia complete all as specified and directed.

S&F in repair PVC connection 600mm long of dia 15mm complete all as specified and directed.

S&F in repairs coloured vertical venetian blind roll on type having minimum 75 mm width of strip complete with all accessories fixed to wall with screws all as specified and directed by Engineer -in -charge.

S&F in repair Vitreous china urinal half stall type white (excluding flushing cistern, flush pipe ) incl 32m dia polyethylene waste pipe complete including providing & fixing plugs bedding urinal against wall in cm(1:2) securing urinal to plug with bran screw complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) coloured including fixing bolt and plastic water closet seat black closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed.

S &F in repair vitreous china coloured under counter wash basins Oval shape type bowl size ( 460x330x200 mm) including brackets complete all as directed by Engineer in charge,32m dia polyethylene fush pipe complete all as specified and directed.

Supply & fix in repair health faucet spray type,incl flexible tube or equivalent complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete all as specified and directed.

S&F grating PTMT square of size 150mm complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed.

Demolition and breaking up drain pipes ( CI ,salt glazed ware,AC or Reinforced concrete) set in cement mortar internal dia of pipein 100mm complete all as specified and directed.

S&F C I 75 mm bore vent cowl complete all as specified and directed.

S & F Branch pieces 100 mm bore , single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment and applying three coat of white washing on wall surface complete all as specified and directed.

M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L Preparation of old surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L for preparation of new plastered surfaces on wall and applying two coats of exterior emulsion paint with anti algal properties over one coat of primer on walls with 1mm thick Exterior wall care putty anti algal properties(Apex ultima or equivalent) on complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying applying two coats of exterior emulsion paint with anti algal properties over one coat of primer on walls with 1mm thick Exterior wall care putty anti algal properties (Apex ultima or equivalent) on complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Stainless steel railing (grade 304 ) made of hollow tubes/squres ( 40 mm for horizontal and 50 mm for vertical post ) , channels, plates etc including welding grinding, buffing polishing and making curvature ( where required) and fitting the same with necessary stainless steel nuts and aaccessoriesall complete all as specified and directed.

S&F raised type PVC wall panelling with decorative finish/ wood finish having thick ness minimum 5 mm thick premium qty over supporting standard grid to rest panelling complete all as specified and directed.

S&F designer false ceiling made of 12 mm thick gypsum board of Saint gobin or equvivalent over and including all GI grid of standard quality to hold false ceiling including two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty complete all as directed and specified.

Excavation in trenches n./exc. 1.5m wide and n/exc. 1.5m in depth for foundation etc., for shafts walls, cesspits manholes pier holes etc. n/exc 10 Sqm on plan and n/exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at alevel 1.5 m above the starting point complete all as specified and directed.

Retrurning filling in soft/loose soil including spreading leveling watering and wall ramming in layers n/exc. 25 cm thick complete all as specified and directed.

M&L for brick work with FLY ASH bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.

M & L 40 mm thick damp proof course in cement concrete 1:2:4, Type B-0 to horizontal or vertical surfaces including water proof compound and necessary form work

M&L PCC (1:4:8) type D-2 (using 40mm graded stone agg.) of in foundation sub base complete all as specified and directed.

M&l for hardcore of guage n. exc 63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, copings, bed plates, and like including weathering slightly rounded or chamfered angles and throating, as directed complete, including necessary formwork complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brickwork for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore , etc., to store and disposed of rubbish not exc. 50 m complete all as specified and directed.

M&L forming jambs, etc., to opening (to foregoing item), including cutting, toothing and properly bonding into old work, new bricks work built in Cement mortar 1:4, also facing, jointing and pointing to match existing work complete all as specified and directed.

M&L Making good under cills or over arches, Lintels and bressummers, including all-pinning when necessary new brick work built in Cement mortar 1:4 complete all as specified and directed.

M & L 15mm thick plastering in cement mortar 1:3 mixed with and includin approved water proofing compound on RCC roof surfaces complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of block masonary or concrete surfaces in 1:6 finished even and fair complete all as specified and directed.

M & L 5 mm thick rendering cement plaster on brickwork or concrete surfaces in cement mortar 1:3 on ceiling , finishing the surfaces even and fair complete all as specified and directed.

M&L PCC type C-1Mix 1:3:6 (20mm graded stone aggregate), 50mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete all as specified and directed.

M&L for brick work with FLY ASH bricks built in CM (1:4) straight or curved on plan to any radius in half brick thick walls with old size bricks complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F 125mm size aluminium handles cast type, anodized complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm length of bolt complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm long complete all as specified and directed.

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed.

M&L RCC 1:2:4 (nominal mix )as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as directed

M & L TMT bars 10mm dia and over cut to length bent to shape required in spacers and binders including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT 8mm dia and over upto including 10mm dia in stirrups spacers and binders cut to length bend to shape required including mild steel wire(annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L white washing three coats on ceiling surfaces including preparation of newly plastered untreated surfaces ceiling complete all as specified and directed.

M&L for prepararion of new plsatered surface of wall and two coat of cement base paint over a coat of primer complete all as specified and directed.

S&F Bib taps 15mm bore cast copper alloy fancy type chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F stop valves, cast copper alloy fancy type chromium plated screwed down high pressure fancy type CP, screwed both ends for 15mm dia bore GI tubing complete all as specified and directed.

S & F Rotational moulded polythelene water storage tank 500 Ltr (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F Cast iron floor trap 75 mm dia, with gratingincluding jointing to waste pipe in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F 15 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density ball screwed for iron pipe and fixed complete all as specified and directed.

S & F 20 mm bore stop valves/gate valve , cast copper alloy screwed down high pressure , with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Vitreous china urinals, half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with & including 60 mm long brass screw, fixing flush pipe, brass CP grating and union for discharge pipe, PVC telescopic waste pipe of suitable length etc complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete all as specified and directed.

S&F PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified and directed.

S&F health faucet with one meter tube and hook complete all as specified and directed.

S&F Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, pillar taps, PVC connection of suitable length, brackets and cutting for & pinning in ends of brackets etc complete all as specified and directed.

S&F PVC connection 600mm long of dia 15mm complete all as specified and directed.

S&F Towel rail chromium plated 600 mm long complete all as specified and directed.

S&F sand cast iron waste/vent pipes 75 mm dia in any length with or without ears with cement joints laid in trenches or in floor/fixed on wall complete all as specified and directed.

S&F sand cast iron soil waste pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor/ on walls complete all as specified and directed.

S&F CI bend any radius dimensioning pieces or tappers for 100 mm pipe complete all as specified and directed.

S&F CI vent cowl for 100 mm bore pipe complete all as specified and directed.

S&F CI bend any radius dimensioning pieces or tappers for 75 mm pipe complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F angle holder, insulated polycarbonate body with back plate complete all as specified and directed.

S&F modular switch one way 6 amp 1 module complete all as specified and directed.

S&F modular switch one way 16 amp 1 module complete all as specified and directed.

S&F modular bell push, 6 amp, 1 module complete all as specified and directed.

S&F modular socket 6/16 - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6 amp 2/3 pin combined 2 module complete all as specified and directed.

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F modular hum free electronic step fan regulator, 100 watt 2 module complete all as specified and directed.

S&F bell multi music type, AC, 240 volts complete all as specified and directed.

S & F in replacement existing unsv distribution board iron clad, double door with IP-43 IK-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 160 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge

S&F MCB distribution board SPN, 240 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete all as specified and directed.

M & L for LED 10 Watt mirror light fittings watts, 2 feet with diffuser complete with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings ( fittings shall be fitted on two plastic square/round block, power factor should not be less than 0.90. complete all as specified and directed.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

S&F In repair energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable, complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Single pole 6 to 16 amp.

Double pole 32 amp.

Four pole 63 amp. Make-Legrand cat ref no. 408702 or equivalent in Schneider or Hager as approved.

S&F Telephone socket double RJ-11, 1 module as per Legrand Mylinc cat ref no. 675544 or equivalent in Schneider Zencelo or MK Blenz as approved complete all as specified and directed.

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified and directed.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.

Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and keeping in safe castody for repair complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable ceiling rose or connector to fan complete all as specified and directed.

S&F MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed. Make : Bajaj / Havells / Crompton

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.. Make - Havells / Polycab / Finolex as approved.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete all as specified and directed.

M&L for galvanized iron water tubing medium grade ISI marked with all fittings laid in trenches for the 20 mm bore complete all as specified and directed.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed.

M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.

M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete all as specified and directed.

M/s Matadeen Ramchandra Agarwal