Construction of office for Sub-Registrar and Asst. Inspector General of Registration at Morbi, Dist.Morbi

Name of Work :-Construction of office for Sub-Registrar and Asst. Inspector General of Registration at Morbi, Dist.Morbi

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

1 0.50 Clearing and grubbing road land including uprooting rank vegetation grass Hect 28455.09 Rupees Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Thousand Four Hundred

and disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five Paise Nine Only

2 2308.00 Earthwork for embankment including breaking clods, dressing with all lead and lift (A) Cum 157.91 Rupees One Hundred Fifty

From Borrow pits within land width Seven Paise Ninety One

3 1552.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of Cum 264.16 Rupees Two Hundred Sixty

useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Four Paise Sixteen Only

4 306.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking Cum 287.21 Rupees Two Hundred

of useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Eighty Seven Paise Twenty

Murrum One Only

5 889.00 Box cutting the road surface to proper slope and camber for making a base for road work 0.00 109.24 Rupees One Hundred Nine

including removing the excavated stuff and depositing on the road side slope as directed Paise Twenty Four Only

6 2308.00 Rolling & Watering of earthwork in layers with power roller including filling in depressions Cum 22.96 Rupees Twenty Two Paise

which occur during the process. As directed Ninety Six Only

7 590.00 Providing and Laying W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm 0.00 1255.20 Rupees One Thousand Two

in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, including Hundred Fifty Five Paise

spreading, watering and cosolidation by vibratory roller as per MoRTH specifications etc. Twenty Only

complete as directed by Engineer-in-charge.

8 77.00 Providing and laying ordinary cement concrete M.150 for curing complete including cost of Cum 4727.19 Rupees Four Thousand

formwork and reinforcement for reinforced concrete work in Foundations, footings,Base of Seven Hundred Twenty

columns and Mass concrete. Seven Paise Nineteen Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

9 446.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3 coarse sand : 6- hand broken Cum 3095.25 Rupees Three Thousand

stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in Ninety Five Paise Twenty

(A) Foundation and Plinth Five Only

10 140.00 Pro. & laying controlled cement concrete M-250 and curing complete inclu. the cost of form Cum 4457.34 Rupees Four Thousand Four

work and foundation, footings, base of column and mass concrete. Hundred Fifty Seven Paise

Thirty Four Only

11 111.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.11 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Plinth Twenty Six Paise Eleven

12 76.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4245.09 Rupees Four Thousand Two

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Hundred Fourty Five Paise

Conventional Nine Only

13 571.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of Cum 136.92 Rupees One Hundred Thirty

foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited Six Paise Ninety Two Only

layer by ramming and watering.

14 70.00 Filling in plinth with sand under floors including watering ramming, consolidating and Cum 481.80 Rupees Four Hundred

dressing complete Eighty One Paise Eighty

15 158.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Cum 301.78 Rupees Three Hundred One

including watering, ramming and consolidating etc. complete. Paise Seventy Eight Only

16 349.00 Carring out plinth treatment to post construction / existing structure by spraying chemical SqM 124.35 Rupees One Hundred

solution for termite control treatment including labour and material consistment with I.S.I Twenty Four Paise Thirty

specification. Using Chlordene and Chiorpurfiles 20 EC.As Per 6131_paret-II Consentration Five Only

Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give

1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre

chemical /Sqm of surface is recommended as per I.S

17 104.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 7407.57 Rupees Seven Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Four Hundred Seven Paise

Column. Fifty Seven Only

18 149.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6482.69 Rupees Six Thousand Four

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Beam Hundred Eighty Two Paise

Sixty Nine Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

19 167.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6686.44 Rupees Six Thousand Six

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Slab Hundred Eighty Six Paise

Fourty Four Only

20 69.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6064.88 Rupees Six Thousand Sixty

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Four Paise Eighty Eight

Vertical and Horizontal fins. Only

21 11.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.11 Rupees Six Thousand

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintel Twenty Six Paise Eleven

22 14.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6510.42 Rupees Six Thousand Five

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Hundred Ten Paise Fourty

Chhajja Two Only

23 14.00 Providing and laying Controlled cement concrete M 250 and curing complete including the Cum 6989.20 Rupees Six Thousand Nine

cost of formwork and excluding cost of reinforcement for reinforced concrete work in Stair Hundred Eighty Nine Paise

Case. Twenty Only

24 118385.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and kg 77.29 Rupees Seventy Seven Paise

placing in position complete. Twenty Nine Only

25 410.00 Brickwork using common burnt Clay building bricks having crushing strength not less than Cum 4526.81 Rupees Four Thousand Five

35 kg./Sq.Cm. in Super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand). Hundred Twenty Six Paise

Eighty One Only

26 415.00 Half brick masonry in common brunt clay building bricks having crushing strength not less SqM 696.33 Rupees Six Hundred Ninety

than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm Six Paise Thirty Three Only

Mild steel round bars after every three course embedded in Cement Mortar in foundation and

plinth (B) Conventional

27 960.00 Providing 10mm thick cement plaster in Double coat on RCC Columns, Beams & Ceillings Sqm 122.26 Rupees One Hundred

for interior plastering With Single Coat Mala Plaster in(i)Cement mortar 1:4 (1-cement:4- Twenty Two Paise Twenty

28 2549.00 Providing 15mm thick cement plaster in Double coat on Rough (Similar)side of single or Sqm 211.82 Rupees Two Hundred

half brick walls,RCC Column, Beams for interior plastering and finished With Double Coat Eleven Paise Eighty Two

Mala Plaster in (i) Cement mortar 1:3 (1-cement:3-sand) Only

29 2908.00 20mm thick sand faced or Smooth cement plaster on walls upto height 10 metres above Sqm 315.69 Rupees Three Hundred

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and Fifteen Paise Sixty Nine

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.as directed. Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

30 1008.00 Providing and applying stonecrete plaster on external wall surfaces in cement mortar 1:3 (1 SqM 829.82 Rupees Eight Hundred

cement : 3 coarse sand) 20 mm thick (by using 10-12 mm as a basecoat) . The plaster shall Twenty Nine Paise Eighty

be finished with exposed natural stone aggregate (10–12 mm size, clean and angular) Two Only

uniformly distributed and chiselled to achieve a decorative stonecrete finish. Work includes

surface preparation, mortar application, embedding of stone chips, chiselling/exposure,

cleaning, curing, and protection of finished surfaces until acceptance also A cement slurry (2

kg/sqm) is applied, followed by the stonecrete mix. The aggregate is exposed by cleaning the

surface with water 1–2 hours after initial setting.. All surfaces shall be true to line and level,

with aggregate exposure consistent in texture and tone, Vertical and horizontal grooves

(10x10x10 mm Standard Size) are required every 2 metres (forming panels of approx. 4-5

SqM).executed under the direction of the Engineer‑in‑Charge.

31 28.00 Providing and filling cinder inlcuding watering and consolidation etc complete. SqM 602.25 Rupees Six Hundred Two

Paise Twenty Five Only

32 383.00 Providing throating or plaster drip and moulding to R.C.C.Chhajja. Rmt 43.05 Rupees Fourty Three Paise

33 267.00 Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at SqM 414.40 Rupees Four Hundred

junction the Brick.masonary and reinforcement cement concrete member, work done before Fourteen Paise Fourty Only

plastering work including scaffolding etc complete.

34 257.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm (Average) Sqm 3127.38 Rupees Three Thousand

thick for For Doors / WIndows cill & Jams Clading as per design incl. full moulded round One Hundred Twenty Seven

front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse Paise Thirty Eight Only

sand ) jointed with grey cement slurry including rubbing and polishing etc. complete.

35 742.00 P & L vitrified (Soluble Salt) 8 mm thick tile flooring over 20 mm (average) base of cement Sqm 1476.54 Rupees One Thousand Four

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Hundred Seventy Six Paise

adhesive material including dismentaling of existing flooring and jointed with color cement Fifty Four Only

slurry including finised with flush pointing & cleaning the surface etc. complete for shade

approved by architect as per Arch. drawing.

36 69.00 P & L vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 Sqm 1467.72 Rupees One Thousand Four

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material Hundred Sixty Seven Paise

including dismentaling of existing flooring and jointed with color cement slurry including Seventy Two Only

finised with flush pointing & cleaning the surface etc. complete for antiskit

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

37 63.00 P & L full body readymade vitrified step-tiles 10-12 mm thick tile of 150x30 cm treads and Sqm 1679.82 Rupees One Thousand Six

150x15 cm risers with half round nosing antiskit flutes in place 7.5 cm skirting of the same Hundred Seventy Nine

as aproved over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on Paise Eighty Two Only

new surface or fixing on existing flooring by adhesive material of existing flooring and

jointed with color cement slurry including finised with flush pointing & cleaning the surface

38 90.00 Providing and laying polished blue Kota stone slab flooring over 20mm (Average) thick base Sqm 1013.87 Rupees One Thousand

of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Thirteen Paise Eighty Seven

sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade Only

of slab including rubbing and polishing etc. complete. (A) 25mm thick

39 61.00 Providing and laying Ceramic tiles 6mm thick in flooring with 3mm groove & Epoxy Sqm 1138.50 Rupees One Thousand One

grouting laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Thirty Eight Paise

finishing with flush pointing in white cement. Fifty Only

(Extra for epoxy grouting 8 Rmt in 1 SqM = 15*8)

40 349.00 Providing and laying coloured glazed tiles of the size 8 mm to 10 mm in skirting, risers of Sqm 1488.24 Rupees One Thousand Four

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with Hundred Eighty Eight Paise

Colored cement slurry. Twenty Four Only

41 373.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 Sqm 779.70 Rupees Seven Hundred

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy

be tempered to bring mortar creme out upto surface using white cement including Only

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

42 389.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded Sqm 339.08 Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight

neat cement. (B) 50mm thick. Only

43 3509.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of Sqm 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and sand

papered smooth.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

44 3509.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on Sqm 89.89 Rupees Eighty Nine Paise

undecorated wall/Celing surface to give an even shade including throughly brushing the Eighty Nine Only

surface free from mortar droppings and other foreign matter and sand papered smooth.

45 3916.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give Sqm 120.26 Rupees One Hundred

an required shape even shade after thoroughly brushing the surface to remove all dirt, and Twenty Paise Twenty Six

remains of loose powdered materials.etc complete Only

46 132.00 Providing & laying weep hole in Aburtments, and returns by using PVC pipe of 100mm No 86.70 Rupees Eighty Six Paise

including laying in proper grede and jointing the completed as per detailed specification. Seventy Only

47 80.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 659.99 Rupees Six Hundred Fifty

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Nine Paise Ninety Nine

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Only

daimeters.(i) 300mm dia.

48 150.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 2107.87 Rupees Two Thousand One

culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of Hundred Seven Paise

slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following Eighty Seven Only

internal diameter. (iv) 600 mm dia.

49 16.00 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical No 2545.86 Rupees Two Thousand Five

gating complete. Hundred Fourty Five Paise

Eighty Six Only

50 356.00 Providing and laying in position Control concrete M-300 grade concrete for using cement Cum 5279.73 Rupees Five Thousand Two

content as per approved improve workability without impiring strength and durability as per Hundred Seventy Nine

direction of the engineer-in-charge. (Min cement level as per latestIS 456 shall be Paise Seventy Three Only

maintained) (Cement level 410kg) for require thickness Trimix C.C. Road with trimix work

with power trowling sheet form with M.S. Channles, surface vibrator with providing road

expansion joint having size thickness h/3 deep minimum by concrete cutter machine and

filled with Bitumin, finishing with Surface hardner 1 sqmt./1.5 kg etc. necessary all

eqipments, all labour charges complete.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

51 149.00 Road marking with hot applied thermoplastic paints with reflectorising glass beads on Sqm 367.72 Rupees Three Hundred

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick Sixty Seven Paise Seventy

including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is Two Only

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge

line/cut patta. The white color marking should provide liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance criteria for night

time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC

35-2015. Warranty for the Retro reflectivity should be two years.

52 1054.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm Rmt 374.92 Rupees Three Hundred

length,30cm height and 15cm thick of M250 grade concret as per approved design and Seventy Four Paise Ninety

including excavation for fixing in proper line and level,filling the joint with C:M 1:3 Two Only

(1cement:3fine sand) etc complete.

53 230.00 supplying and fixing Razor Concertina Coil G.I. wire 600mm dia 1.33kg/Mt (Streched Rmt 767.60 Rupees Seven Hundred

Length) including galvanised steel barbed wire weight 9.38kg per 100 metre strained (6 Sixty Seven Paise Sixty

layer of Barbed Wire) and fixed with Mild steel Angle 40mm x 40mm x 6mm at every 3.0m Only

interval for fencing on masonary wall including a coat of priming coat of red oxide and two

coated of oil paint on M.S. Angle etc. as per engineer-in-charge etc. complete.

54 24.00 Providing and fixing cattle trap of required size and design by providing GI pipes 50mm dia SqM 6506.17 Rupees Six Thousand Five

at 10 cm c/c including providing “c" chanels 100x50x6x6mm size including necessary Hundred Six Paise

excavation 10 CM thick CC 1:2:4 for foundation complete CC wall of CC 1:3:6 with cement Seventeen Only

plaster 15mm thick in CM 1:4 etc. complete as directed by Engineer – in – Charge.

55 251.00 Providing and fixing up to floor two level precast terracotta jali or grill of approved design SqM 3514.02 Rupees Three Thousand

and pattern, manufactured from natural fired clay units, minimum 100 mm thick, including Five Hundred Fourteen

reinforcement with 1.6 mm dia. mild steel wire where required, surface roughening, Paise Two Only

cleaning, fixing and finishing in cement mortar 1:3, and curing complete as per

specifications.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

56 618.00 Providing and fixing exposed brick cladding on external surfaces using machine‑made SqM 2705.75 Rupees Two Thousand

first‑class bricks of uniform size and color, laid in cement mortar 1:4 (1 cement : 4 coarse Seven Hundred Five Paise

sand). The bricks shall be selected for texture and tone consistency, laid with precise joints Seventy Five Only

(10 mm thick), and finished with raked pointing to achieve a natural exposed finish. Work

includes surface preparation, alignment, cleaning, curing, and protection of finished surfaces

until acceptance. All joints shall be uniformly struck or recessed, and the cladding shall be

flush with adjacent masonry or RCC surfaces as directed by the Engineer‑in‑Charge. The

exposed brickwork shall be executed in approved pattern and bond (stretcher or Flemish) to

match architectural intent. Rate includes scaffolding, materials, labour, curing, and finishing

57 4535.00 Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat Kg. 130.38 Rupees One Hundred Thirty

of primer and two coat oil paint as per details given by architect. as per attached detail Paise Thirty Eight Only

architectural drawing.

58 5.00 Providing And Fixing entrace door with floor spring & pivoted shutter made from T.W. 5 Sqm 9756.46 Rupees Nine Thousand

cm x 15 cm styles and 6 Nos. 5 cmx5 cm T.W. rails covered with 6 mm thhick water proof Seven Hundred Fifty Six

ply finished with both sides laminates colour and shape approved by architect. 60 cm long Paise Fourty Six Only

S.S. handel on both shutter And S.S.Fixtures & Locking Arrangement On Each Shutter, etc

As Per Selection. As Directed.

59 41.00 Providing And Fixing 38mm thick solid core Wooden Flush Shutter Confirming To Is:2202 Sqm 7191.28 Rupees Seven Thousand

& Isi Approved Manufacturer, Covered With 1mm Thick Laminates On Each Side Of One Hundred Ninety One

Shutter, 6mm Thick Polished Machine Glued Teakwood Beading On Periphery, 150mm - Paise Twenty Eight Only

200mm S.S.Handles And S.S.Fixtures & Locking Arrangement On Each Shutter, Fixed

With 4 Nos. 150Mm High S.S.Hinges,Door Stopper, etc As Per Selection. As Directed.

60 47.00 Providing and fixing Frame : 45x90 mm solid wpc (Wood plastic composite) door frame Sqm 5115.52 Rupees Five Thousand One

with rebate of 37mm. The door frame having density of 850 km/Cum. Including architrave Hundred Fifteen Paise Fifty

of 45 x 16mm (press fit fixing(. All joints are miter joints. Fully finished with selected PVC Two Only

Laminate foil. Brands : Flexibond/ Path / Kaka / Ecoste / Ecotimvber with 5 years warrenty.

Single shutter : 28 mm thick Solid WPC (wood plastic composite) door shutter, finished

with HPL lamination & UV coating. It should be having density of 850 Kg/Cum. Fully

finished with selected PVC leminate foil Flexibond/ Path / Kaka / Ecoste / Ecotimvber with

5 years warrenty.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

61 92.00 Providing and fixing window having extruded aluminum Colour anodized section frame Sqm 5041.86 Rupees Five Thousand

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track Fourty One Paise Eighty

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size Six Only

122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 3 shutter of 5 mm thick transparent bronze colour tinted float

glass & 1 shutter of SS mosquito net shutter with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

62 12.00 Providing and fixing Standard Extruded Colour Anodized Alluminium Section, Sqm 2822.09 Rupees Two Thousand

Equivalent To Jindal Section Frame - 21458, With 5Mm. Thick Frosted Glass Adjustable Eight Hundred Twenty Two

Louvers Of Standard Make as per instructions given by engineer in charge. Paise Nine Only

63 70.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof plywood ( ISI SqM 10227.52 Rupees Ten Thousand Two

710) and fixing minimum 0.8 mm thick decorative lamination sheet (20 mm x 2 mm) Hundred Twenty Seven

Plywood frame having a size 7 cm x 4 cm and also provide drawer with tendum of min Paise Fifty Two Only

60cm size and min 3 no. of shelves using necessary fixtures, fastening, nails, fevicol, ball

catch, magnet and innerside of cupboard oil painting two coats with primer coat etc.

complete as per detailed drawing and laminate will be selected by engineer in charge.

64 43.00 Providing and fixing stainless steel modular side mounted railing at 900-1000mm height and Rmt 3254.87 Rupees Three Thousand

of SS pipe with support of horizontal pipe as 15mm dia at required spacing as per design by Two Hundred Fifty Four

engineer in charge and SS having 316 grade and 15 guage pipe including fastening, hold Paise Eighty Seven Only

fast, clumps, coach bolts for fixing to wall including touching finishing to wall etc complete

approved by Architect.

65 116.00 Providing and fixing fix louvers: 114 mm wide G.I. sheet having thickness of 0.55 mm & Rmt 3694.58 Rupees Three Thousand Six

weight not less than 490 gm /meter, roll formed to create 84 mm wide louver snap fixed on Hundred Ninety Four Paise

special shaped G. I. Channel. Fix louvers & Channels shall finished with powder coating of Fifty Eight Only

55 micron per detailed drawing and as directed by Engineer in charge etc.complete.

66 34.00 Providing & laying Granite shelves to C.B. with making the grooves in the walls and fixing SqM 2197.45 Rupees Two Thousand One

the same complete. Hundred Ninety Seven

Paise Fourty Five Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

67 75.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 170.36 Rupees One Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Seventy Paise Thirty Six

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[A] 15 mm.

68 75.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 253.82 Rupees Two Hundred Fifty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Three Paise Eighty Two

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[C] 25 mm.

69 100.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 447.72 Rupees Four Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Fourty Seven Paise Seventy

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Two Only

complete.[E] 40 mm.

70 100.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 660.58 Rupees Six Hundred Sixty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Fifty Eight Only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete.[F] 50 mm.

71 300.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

72 300.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

73 320.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 148.12 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

74 570.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

75 600.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt 280.23 Rupees Two Hundred

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

76 640.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 297.80 Rupees Two Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Ninety Seven Paise Eighty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-110mm Dia

77 380.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 613.27 Rupees Six Hundred

suitable for potable water with ring fit joints including cost of rings, as per IS specification Thirteen Paise Twenty

no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Seven Only

inspection charges, loading, unloading conveyance to the site and including cost of joining

materials etc. complete.

PVC pipe Test pressure 6 Kg/cm3-160mm Dia

78 20.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred

Ninety Three Paise Four

79 20.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Rupees Five Hundred Five

Paise Seventeen Only

80 30.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise

Eighty Three Only

81 45.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

82 30.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

Paise Eighty Three Only

83 18.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred

Eighty Six Paise Eighty

84 18.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred

Twenty Paise Sixty Three

85 30.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 663.43 Rupees Six Hundred Sixty

Three Paise Fourty Three

86 18.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

87 60.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Each 186.83 Rupees One Hundred

polished bright. (i) 15mm dia. Eighty Six Paise Eighty

88 15.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks Each 308.73 Rupees Three Hundred

and back nuts. (i) 15mm dia. Eight Paise Seventy Three

89 6.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Each 282.16 Rupees Two Hundred

Eighty Two Paise Sixteen

90 15.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

91 15.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

92 6.00 Providing and fixing Urinal or approved quality including conecting the Urinal with waste Each 1074.86 Rupees One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Seventy Four Paise Eighty

260mm x 350mm. Six Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

93 12.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S Each 1356.81 Rupees One Thousand

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

94 9.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Each 987.14 Rupees Nine Hundred

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Eighty Seven Paise

Vitreous China.(I) Long pattern = White colour Fourteen Only

95 18.00 Providing and fixing toilet paper holder.(A) C.P. Brass Each 427.99 Rupees Four Hundred

Twenty Seven Paise Ninety

96 18.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Each 616.42 Rupees Six Hundred

plugs with C.P. brass scews.(B) 600mm x 20mm size. Sixteen Paise Fourty Two

97 9000.00 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required Lit 3.95 Rupees Three Paise Ninety

capacity each with all necessary fittings and connection etc. complete on terrace. Five Only

(Confirming IS 12701) aprooved makes only.

98 8.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends each 2932.93 Rupees Two Thousand Nine

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with Hundred Thirty Two Paise

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to Ninety Three Only

be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

99 40.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 2027.98 Rupees Two Thousand

finished with radium sticker including necessary scaffolding for fixing with epoxy material Twenty Seven Paise Ninety

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eight Only

consider as a half letter)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

100 915.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm SqM 706.93 Rupees Seven Hundred Six

thick with grade of concrete M250 pnumatic compressed/vibrated mechanically and as per Paise Ninety Three Only

approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018

etc. Complete. equivalent to vyara and saple must selected by office.

101 1046.00 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having SqM 1674.15 Rupees One Thousand Six

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Hundred Seventy Four

Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible Paise Fifteen Only

as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043°w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and size of 24X38mm made from

mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of

the 1200X600mm panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of

0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with

25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineerin- charge.Note:- Only calcium silicate

false ceiling area will be measured from wall to wall. No deduction shall be made for

exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC.Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos

and 0.75 NRC for Globe, light reflection 85% noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best

thermal Insulation

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

102 300.00 Drilling of 215mm dia bore hole in over burden strata (alternative layer of lime stone and Rmt 551.46 Rupees Five Hundred Fifty

yellow stridly formation) by DTH regi. up to required depth including fixing of 175/180 dia One Paise Fourty Six Only

ERW/PVC pipe if required drilling by 165mm dia bore hole in hard rock strata DTH drilling

method up to total 120 mt.

103 220.00 HDPE Pipe for require dia. Rmt 551.46 Rupees Five Hundred Fifty

One Paise Fourty Six Only

104 1.00 Providing and fixing of M.S. Bore plug of required capacity etc. complete. No 1919.00 Rupees One Thousand Nine

Hundred Nineteen Only

105 210.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for No 1968.38 Rupees One Thousand Nine

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Hundred Sixty Eight Paise

in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Thirty Eight Only

daimeters.(iii) 600mm dia.

106 24.00 Providing and constructing 'A' type Sewer manholes, scraper manhales and unit house No 18995.07 Rupees Eighteen Thousand

connection chamber, as per the type design m brick masonry m CM15 and inside and Nine Hundred Ninety Five

outside 20mm thick plastering in C. M 1-3 necessary 100 mm coping with reinforcement in Paise Seven Only

RC CM 200 fixing C 1 steps and fixing manhole frame and covers over manholes and house

connection chambers and fixing Manhole covers over scraper manhole etc complete.

providing and fixing safety chain wherever necessary as per the stipulations in the type

design complete as per latest CPHEEO manual.

107 1539.00 Plantation of carpet type lawn including labour materials , watering and growing etc. and SqM 113.12 Rupees One Hundred

maintaining same upto six months. Thirteen Paise Twelve Only

108 385.00 Plantation of flower bed with selected flower plant including planting the same at 45 CM SqM 441.37 Rupees Four Hundred

apart and growing the same including maintenance upto six months. Fourty One Paise Thirty

109 20.00 Planting of hedge with selected hedge plant like Golden , Duranta, Red Bhaji or selected Rmt 207.05 Rupees Two Hundred Seven

plant @ 45 CM apart and maintenance upto six months. Paise Five Only

110 20.00 Planting of selected shrubb trees like Ticoma, Nerium or other selected plant including No 70.70 Rupees Seventy Paise

preparing pit of size 30 x 30 x 30 CM and filing with selected garden soil including manure, Seventy Only

fertilizer and maintenance up to six months.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

111 20.00 Providing Three plants having minimum 1.00 mt. hight and healthy growth of various kinds No 80.80 Rupees Eighty Paise Eighty

as like peltroform, Gulmahore, Karanj, Ambla, Rain tree, Sapparni, Cherry, Cryjeliya, Only

Spethodiya, Paras Pipala, Garmali, Neem, Borsalli, Kadam, Buch, Chanpo, Asopalav and as

112 20.00 Providing tree plants having minimum 1.00 mt height and health growth of bottle palm tree, No 2903.75 Rupees Two Thousand Nine

Cycus palm and other palm tree planting including 30 x 30 x 30 Cm. pit filling with selected Hundred Three Paise

garden soil including manure, fertilizer and maintenance upto six month. Seventy Five Only

113 40.00 Providing and installing RCC three‑seater garden benches of size approx. 1.5–1.8 m length, No 7979.00 Rupees Seven Thousand

cast in M25 grade concrete with integrated seat, backrest, and supports. Bench finished with Nine Hundred Seventy Nine

waterproof acrylic coating/polished stone chips, edges rounded for safety, and securely fixed Only

on PCC foundation. Complete as per engineer’s direction.

114 29700.00 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in Kg 58.19 Rupees Fifty Eight Paise

position and applying a priming coat of red lead paint. (A) In beams and joists, channels Nineteen Only

angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like.

115 660.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The SqM 959.50 Rupees Nine Hundred Fifty

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Nine Paise Fifty Only

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

116 6.00 Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including No 2731.34 Rupees Two Thousand

necessary excavating 23 Cum. brickwall, beding CC 1:2:4, top RCC slab, 15mm thick Seven Hundred Thirty One

plaster and connection of rain water pipes as per detail drawings and as directed by engineer Paise Thirty Four Only

117 4.00 Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth No 13212.57 Rupees Thirteen Thousand

including necessary excavation 23cm brickwall beding CC 1:2:4 top RCC slab. 15mm thick Two Hundred Twelve Paise

plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt. Kapachi 10 to 12mm size Fifty Seven Only

and coarse sand 0.60 mt. etc. as directed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

118 24.00 Providing and fixing acrylic multilingual Braille (raised dots \ DIRECTIONAL No 2641.15 Rupees Two Thousand Six

SIGNBOARDS of size 225 x 150mm designed as per accessibility standards and having Hundred Fourty One Paise

3.5mm thick acrylle base plate with Upper Case San Serif words made of white acrylic non Fifteen Only

glare cut out letters of height 15mm ralsed not less than 0,8mm above base plate and the

equivalent word written in Hindi with Devanagari non glare acrylic letters of height 15mm

raised not less than 0.8mm above base plate and having a non -glare acrylic cut arrow

pointing in the required direction. Each signboard to be fixed as per manufacturers

specifications on the wall at the approved location and at a height of 1200mm from FL

complete as per design / specifications and guidelines as per the entire satisfaction of

the Engineer in charge

119 24.00 Providing and Fixing braile indicator of size 170 mm x 35mm for handrails of the approved Rmt 1099.89 Rupees One Thousand

design and make have braile dots raised 0.5 mm above base plate to be installed at specific Ninety Nine Paise Eighty

locations as per direction of engineer in charge Nine Only

120 153.00 Providing and fixing of conspectus tape 50mm wldth on of treads in staircase including Rmt 417.13 Rupees Four Hundred

cutting pasting etc . As per harmonised guidelines complete in all respect to the entire Seventeen Paise Thirteen

satisfaction of engineer in charge. Only

121 30.00 Providing and Fixing Size : L. 75mm X W 75mm x I 1200 1 15 mum thick U shape corner No. 966.57 Rupees Nine Hundred Sixty

Rubber Reflective Guards with yellow reflective Patti fixing on RCC/brick surface including Six Paise Fifty Seven Only

all fitting and materfat charges & It shall be Chemical Resistant, Fade Proof, Frost - Heat &

Weather Proof, High Flexural Strength, Illghly Durablo, Stain Resistance as per detailed

drawing etc. complete as directed by Architect or Engineer in charge.

122 78.00 Providing and Fixing 15 mm thick 300 mm 300 mm Tactile Warning Tiles Attention Tiles SqM 1468.54 Rupees One Thousand Four

i.e. Tactile Warning Surface Indicator (TWSI)) of Johnsan Endura Tac Button Yellow Plus Hundred Sixty Eight Paise

or eduvglent make in flooring laid on 20 mm thick cement mortar 1:6 (1 cement: 6 coarse Fifty Four Only

sand) on new surface and jointed with cement slurry including finished with flush pointing

& cleaning the surface for all floors as per detailed drawing etc. complete as directed by

Architect or Engineer in charge. The tiles shall be Anti Skid, Chemical Resistant, Fade

Proof, Frost - Ileat & Weather Proof, iligh Flexural Strength, Highly Durable, Stain

Resistance .All Tactile Warning Tiles meet the specifle size and dimenslon standards as

required by 150/FDIS

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

123 5.00 Providing and Fixing a set of wall mounted 30 man dir U shapelf horizontal stainless steel Set 4242.00 Rupees Four Thousand Two

collapsible grab bar , 36mm vertical stainless steel fixed grab rail of grade SS 304 from Hundred Fourty Two Only

round ple supported and 75 mm dia 8 mm thick SS 304 base flange on wall including anchor

fasteners, nuts, accessorles as per dotalled drawing etc. complete ns directed by Architect or

Engineer in charge.

124 36.00 Supply & Installing of ABC Type - 6 Kg, Capacity Fire Extinguisher as per IS -2171 ISI - No 5899.41 Rupees Five Thousand

mark , with necessary Fittings etc. complete. Eight Hundred Ninety Nine

Paise Fourty One Only

125 36.00 Supply & Installing of Gas Co2 Type–4.5 Kg.. Capacity Fire Extinguisher as per IS And No 6912.44 Rupees Six Thousand Nine

ISI - mark , with necessary Fittings etc. complete. Hundred Twelve Paise

Fourty Four Only

126 165.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Pt. 491.87 Rupees Four Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Ninety One Paise Eighty

erected in existing pipe of following size (Specifically for control panel, relays, power Seven Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(j) in existing pipe erected concealed in wall/ceiling complete

127 9.00 Bell Point Pt. 491.87 Rupees Four Hundred

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Ninety One Paise Eighty

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seven Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(j) in existing pipe erected concealed in wall/ceiling complete

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

128 75.00 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of Pt. 144.43 Rupees One Hundred

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand Fourty Four Paise Fourty

copper wires, in below type of pipe to be erected complete with earth continuity and Three Only

necessary connection with primary light with accessories erected on Metal / PVC / wooden

box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

(j) in existing pipe erected concealed in wall/ceiling complete

129 84.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI Pt. 667.61 Rupees Six Hundred Sixty

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Seven Paise Sixty One Only

in below type of pipe erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(j) in existing pipe erected concealed in wall/ceiling complete Cat. III

130 43.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 511.06 Rupees Five Hundred

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in Eleven Paise Six Only

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

(j) in existing pipe erected concealed in wall/ceiling complete Cat. III

131 46.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 681.75 Rupees Six Hundred Eighty

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in One Paise Seventy Five

below type of pipe erected complete with Modular type switch & 5 pin Plug erected on Only

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(j) in existing pipe erected concealed in wall/ceiling complete

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

132 76.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected Pt. 309.06 Rupees Three Hundred

on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Nine Paise Six Only

metallic/white front plate modules erected on / in wall / ceiling with following type

133 3.00 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 Pt. 617.11 Rupees Six Hundred

sq.mm (green) both are of .ISI marked 1.1 kV grade FRLS PVC insulated multi strand Seventeen Paise Eleven

copper wires erected in below type of pipe with 6A Modular type switches and following Only

type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as

(j) in existing pipe erected concealed in wall/ceiling complete

134 8.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

135 60.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 25.25 Rupees Twenty Five Paise

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Twenty Five Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single

136 41.00 Providing following type of Modular Type Accessories mounted with PVC / Ea. 160.59 Rupees One Hundred Sixty

metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only

front plate , modules erected with necessary connections as per site situation directed by

Engineer In charge.

(8) Computer RJ-45 socket Cat.III

137 3410.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr. 24.24 Rupees Twenty Four Paise

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Twenty Four Only

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

138 98.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr. 33.33 Rupees Thirty Three Paise

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Thirty Three Only

boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved

manner as directed

139 10.00 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC Mtr. 21.21 Rupees Twenty One Paise

bushes, Check-nuts etc. complete of following sizes. Twenty One Only

140 941.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 78.78 Rupees Seventy Eight Paise

Copper conductor wire in following type of pipe to be erected concealed in /flushed on Seventy Eight Only

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(E) in existing pipe

(b) 2 wire 2.5 sq. mm

141 106.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr. 498.94 Rupees Four Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Ninety Eight Paise Ninety

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Four Only

continuity of following size

(E) in existing pipe

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

142 30.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 70.70 Rupees Seventy Paise

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seventy Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(e) One wire 6.00 sq. mm

143 96.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 115.14 Rupees One Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Fifteen Paise Fourteen Only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(f) One wire 10.00 sq. mm

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

144 6.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 295.93 Rupees Two Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Ninety Five Paise Ninety

erected in existing pipe of following size (Specifically for control panel, relays, power Three Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(h) One wire 25.00 sq. mm

145 30.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 376.73 Rupees Three Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seventy Six Paise Seventy

erected in existing pipe of following size (Specifically for control panel, relays, power Three Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(i) One wire 35.00 sq. mm

146 18.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 588.83 Rupees Five Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Eighty Eight Paise Eighty

erected in existing pipe of following size (Specifically for control panel, relays, power Three Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(j) One wire 50.00 sq. mm

147 6.00 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr. 837.29 Rupees Eight Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Thirty Seven Paise Twenty

erected in existing pipe of following size (Specifically for control panel, relays, power Nine Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

(k) One wire 70.00 sq. mm

148 384.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI Mtr. 58.58 Rupees Fifty Eight Paise

marked copper wires of following size to be erected as directed. Fifty Eight Only

(e) 1.50 Sq.mm 3 core round PVC sheathed

149 163.00 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE Mtr. 14.14 Rupees Fourteen Paise

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS Fourteen Only

PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

150 882.00 Supplying & erecting approved make LAN cable of following size in existing pipe as per Mtr. 47.47 Rupees Fourty Seven Paise

direction Fourty Seven Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

151 41.00 Providing & erecting Switch board for Computer or electric apparatus consisting of Ea. 1133.22 Rupees One Thousand One

following modular type accessories mounted with PVC / Metallic concealed/open box with Hundred Thirty Three Paise

single mounting base frame covered with textured/metallic /white front plate,modules Twenty Two Only

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories Cat. III

152 9.00 Decorative call bell Ting-tong box type 250 volts complete erected Ea. 71.71 Rupees Seventy One Paise

Seventy One Only

153 51.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 535.30 Rupees Five Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Thirty Five Paise Thirty

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Only

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

154 21.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, Ea. 112.11 Rupees One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Twelve Paise Eleven Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

155 150.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea. 589.84 Rupees Five Hundred

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Eighty Nine Paise Eighty

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high Four Only

U.V. & corrosion resistance with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 kV

156 45.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 5080.30 Rupees Five Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Eighty Paise Thirty Only

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(iii) 60 - 89 watts Cat-lll

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

157 10.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 4760.13 Rupees Four Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Seven Hundred Sixty Paise

and corrosion free High pressure die cast aluminum housing with smooth finish powder Thirteen Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(B) Flood Light (IP-65), Surge protection -4kV integral and ,Light must have 440VAC line

supply with over-voltage protection.

(ii) 48 - 59 Watts

158 2.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 3478.44 Rupees Three Thousand

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Four Hundred Seventy

and corrosion free High pressure die cast aluminum housing with smooth finish powder Eight Paise Fourty Four

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, Only

with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage capacity between the ranges

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun

aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired up to terminal block.IP

(i)20- 30W Cat-lll

159 1.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter Ea. 5482.28 Rupees Five Thousand Four

connection suitable to following size of moulded case circuit breaker having CT ratio & Hundred Eighty Two Paise

MCCB rating as following along with shunt trip 220V AC. with all internal connections & Twenty Eight Only

complete erected in existing M.S.housing..

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

160 7.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 6790.23 Rupees Six Thousand Seven

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Hundred Ninety Paise

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all Twenty Three Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only

161 3.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 8861.74 Rupees Eight Thousand

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Fixed Eight Hundred Sixty One

thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all internal Paise Seventy Four Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

162 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 17843.67 Rupees Seventeen

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Thousand Eight Hundred

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Fourty Three Paise Sixty

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing Seven Only

ICS=100% of ICU only Cat III

163 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 19628.04 Rupees Nineteen Thousand

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Six Hundred Twenty Eight

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Paise Four Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

( Added 10% For Enclosure )

164 1.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel Ea. 2611.86 Rupees Two Thousand Six

mounting with operating mechanism A.C.23 duty confirming to IS for Hundred Eleven Paise

(A)32-40A Cat-lll Eighty Six Only

165 1.00 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 1961.42 Rupees One Thousand Nine

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Hundred Sixty One Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Fourty Two Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(A) Suitable for 100 Amp. Capacity

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

166 2.00 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 3202.71 Rupees Three Thousand

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Two Hundred Two Paise

sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Seventy One Only

phase sequence of following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.

(B) Suitable for 200 Amp. capacity

167 57.00 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having Ea. 297.95 Rupees Two Hundred

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Ninety Seven Paise Ninety

Mark Cat.III Five Only

168 72.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on Ea. 123.22 Rupees One Hundred

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Twenty Three Paise Twenty

confirming to IS 8828/1996 with ISI Mark Two Only

169 28.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Ea. 362.59 Rupees Three Hundred

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Sixty Two Paise Fifty Nine

following capacity Only

(B) 40 Amp. Cat.III

170 1.00 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having Ea. 702.96 Rupees Seven Hundred Two

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Paise Ninety Six Only

(b)40 Amp. Cat.III

171 21.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having Ea. 736.29 Rupees Seven Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Thirty Six Paise Twenty

(b)40 Amp. Nine Only

172 3.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Ea. 176.75 Rupees One Hundred

Seventy Six Paise Seventy

173 6.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 3874.36 Rupees Three Thousand

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Eight Hundred Seventy

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Four Paise Thirty Six Only

used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type

(b) sheet steel double door

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

174 3.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 2166.45 Rupees Two Thousand One

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Hundred Sixty Six Paise

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Fourty Five Only

all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed

175 18.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 2458.34 Rupees Two Thousand Four

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Hundred Fifty Eight Paise

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Thirty Four Only

all advance feature & do not incorporate any electronic component. for following Max.

rating erected as directed

(ii) 40Amps. DP

176 20.00 Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Kg. 794.87 Rupees Seven Hundred

Transformer, LT panel board, Motors etc. using copper clamp. Ninety Four Paise Eighty

177 4.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Ea. 4591.46 Rupees Four Thousand Five

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free Hundred Ninety One Paise

hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Fourty Six Only

Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

178 5.26 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated Sq.Mtr 10468.65 Rupees Ten Thousand Four

indoor type cubical panel board necessary IP-42 and above protection as per approval from Hundred Sixty Eight Paise

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Sixty Five Only

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth

179 160.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Kg. 77.77 Rupees Seventy Seven Paise

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with Seventy Seven Only

cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection

on site as per direction of engineer in charge with necessary grouting, cementing, plastering

& finishing complete.

180 50.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 341.38 Rupees Three Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Fourty One Paise Thirty

of following size of cables Eight Only

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

181 65.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 454.50 Rupees Four Hundred Fifty

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Four Paise Fifty Only

of following size of cables

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

182 55.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Mtr. 589.84 Rupees Five Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Eighty Nine Paise Eighty

of following size of cables Four Only

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

183 1063.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr. 168.67 Rupees One Hundred Sixty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Eight Paise Sixty Seven

trench / pipe of following size of cables Only

(C) 4 core 10 Sq. mm

184 35.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Mtr. 184.83 Rupees One Hundred

Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing Eighty Four Paise Eighty

trench / pipe of following size of cables Three Only

(A) 4 core 16 Sq. mm

185 1070.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 74.74 Rupees Seventy Four Paise

laying any size of cable or locating the fault all over the run and back filling the same and Seventy Four Only

making the surface as normal ground.

186 20.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr. 357.54 Rupees Three Hundred

laying any size of cable or locating the fault all over the run and back filling the same and Fifty Seven Paise Fifty Four

making the surface as normal ground. Only

(B) If additional machinery like hammer driller or JCB use [Add]

187 20.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the Mtr. 226.24 Rupees Two Hundred

road crossing or on floor with necessary material in an approved manner and making the Twenty Six Paise Twenty

ground as per original. Four Only

(F) 100 mm dia.

188 1040.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 62.62 Rupees Sixty Two Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Sixty Two Only

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(A)50 mm outer dia

189 100.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 73.73 Rupees Seventy Three Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Seventy Three Only

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

(B)63mm outer dia

190 1.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 38.38 Rupees Thirty Eight Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Thirty Eight Only

(C) 2 to 4 core 10 Sq. mm

191 2.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea. 47.47 Rupees Fourty Seven Paise

insulated armoured cable complete with out going tails, insulating tape etc for following size Fourty Seven Only

(D) 2 to 4 core 16 Sq. mm

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

192 4.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 75.75 Rupees Seventy Five Paise

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Seventy Five Only

tape etc for following size of cables.

(B) 3 & 1/2 core 35/50 Sq. mm

193 2.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 103.02 Rupees One Hundred Three

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating Paise Two Only

tape etc for following size of cables.

(C) 3 & 1/2 core 70 Sq. mm

194 4.00 Providing and, fixing heavy duty flange type brass double compression type cable gland Ea. 131.30 Rupees One Hundred Thirty

with rubber ring for PVC insulated armoured cable complete with out going tails, insulating One Paise Thirty Only

tape etc for following size of cables.

(D) 3 & 1/2 core 95 Sq. mm

195 4.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 13.13 Rupees Thirteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Thirteen Only

brass/cadmium plated nut bolts in an approved manner.

196 8.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 15.15 Rupees Fifteen Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Fifteen Only

brass/cadmium plated nut bolts in an approved manner.

197 22.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 20.20 Rupees Twenty Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Only

brass/cadmium plated nut bolts in an approved manner.

198 6.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 25.25 Rupees Twenty Five Paise

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Five Only

brass/cadmium plated nut bolts in an approved manner.

199 12.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea. 40.40 Rupees Fourty Paise Fourty

size evenly crimped with high pressure tool & connected to switchgear terminals with Only

brass/cadmium plated nut bolts in an approved manner.

200 84.00 Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double Ea. 1948.29 Rupees One Thousand Nine

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Hundred Fourty Eight Paise

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with Twenty Nine Only

earthing.(Make shall be approved by Engineer in charge))

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

201 84.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod Mtr. 108.07 Rupees One Hundred Eight

erected duly painted for fan complete with proper insulation without leakage and earthing. Paise Seven Only

202 84.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up Ea. 108.07 Rupees One Hundred Eight

to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Paise Seven Only

complete erected concealed in Ceiling with necessary finishing.

203 84.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea. 18.18 Rupees Eighteen Paise

204 21.00 Supplying & erecting approved make low noise decorative exhaust fan having square frame Ea. 1366.53 Rupees One Thousand

ABS body with inbuilt lowers & square frame. Three Hundred Sixty Six

200mm with 1350RPM Cat.II Paise Fifty Three Only

205 17.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 13476.43 Rupees Thirteen Thousand

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Four Hundred Seventy Six

having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Fourty Three Only

shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box

with necessary accessories . The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[F] Overall length of 5 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without

Base) Anchor Base (Size 250X250 & 16mm th.)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

206 14.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 14288.47 Rupees Fourteen Thousand

by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Two Hundred Eighty Eight

having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Fourty Seven Only

shape, having smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor Base and it should be

heavy duty, or MS Material duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and

pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after

applying suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%

of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as per

standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box

with necessary accessories . The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(2) Suitable for base plate mounting Double arm Bracket.

[A] Overall length of 5 Mtr. Average Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/163mm ± 2mm approx.approx. Weight of Pole 31 kg approx.

(Without Base) Anchor Base (Size 300X300 &18mm th.)

( With Withstand Capacity Triple and Four Bracket Arm )

207 17.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea. 2569.44 Rupees Two Thousand Five

the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Hundred Sixty Nine Paise

(A) Single arm bracket Fourty Four Only

208 14.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea 3968.29 Rupees Three Thousand

the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Nine Hundred Sixty Eight

(B) Double arm bracket Paise Twenty Nine Only

209 12.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- Ea. 524.19 Rupees Five Hundred

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Twenty Four Paise Nineteen

for mounting mob & hinged doors as per requirement having locking arrangements with Only

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(E) 200mm x 140mm x 125mm [deep]

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

210 1.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years Ea. 3168.37 Rupees Three Thousand

operative and operate battery backup 1 channel day clock with 14 memory programme, One Hundred Sixty Eight

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup Paise Thirty Seven Only

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover

erected as required with necessary connection erected as directed.

211 1.00 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per Ea. 2782.55 Rupees Two Thousand

direction Cat III Seven Hundred Eighty Two

(D) 4 pole 440V 40 Amp. Paise Fifty Five Only

212 1.00 Providing and erecting Inverter based approved make split air-conditioning unit consisting Ea. 52667.46 Rupees Fifty Two Thousand

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary Six Hundred Sixty Seven

compressor with accessories etc. duly connected separately erected evaporating unit and Paise Fourty Six Only

blower motor with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A

plug top & Remote Control & MS Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(B) for 1.5 ton capacity

213 8.00 Supplying and erecting insulated pair of soft copper tubing open or concealed including Rmt 1158.47 Rupees One Thousand One

power and control cable,necessary PVC drain pipes for Split/Cassette AC machine up to 4 Hundred Fifty Eight Paise

TR capacity Fourty Seven Only

214 3.00 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ea. 61482.74 Rupees Sixty One Thousand

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C Four Hundred Eighty Two

within a hour, The water cooler should be comprising of hermetically sealed compressor, fan Paise Seventy Four Only

motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel and ISI Certified.

215 3.00 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. Ea. 29187.99 Rupees Twenty Nine

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon Thousand One Hundred

filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon Eighty Seven Paise Ninety

filter auto low & high pressure switches with following size of storage tank & LPH capacity Nine Only

& erected as directed

[C] 50 Ltr / Hr with 150 psi 2 nos booster pump

216 4.00 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 Ea. 1275.63 Rupees One Thousand Two

digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Hundred Seventy Five Paise

connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

217 4.00 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 Ea. 1558.43 Rupees One Thousand Five

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate Hundred Fifty Eight Paise

on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with Fourty Three Only

manufacturers calibration certificate.

218 8.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V Ea. 317.14 Rupees Three Hundred

on existing panel board with necessary connections. Seventeen Paise Fourteen

219 12.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 Ea. 274.72 Rupees Two Hundred

VA burden erected in existing CRCA box duly secured with insulating materials connected Seventy Four Paise Seventy

to the meter Two Only

220 12.00 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, Ea. 43.43 Rupees Fourty Three Paise

complete erected with necessary connections. Fourty Three Only

221 2.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea. 20621.17 Rupees Twenty Thousand

complete for three phase submersible motor having Six Hundred Twenty One

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to Paise Seventeen Only

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe

222 2.00 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made Ea. 7722.46 Rupees Seven Thousand

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Seven Hundred Twenty

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) Two Paise Fourty Six Only

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The isolator, overload

relay & contactors will be of L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

223 1.00 Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) Ea. 13605.71 Rupees Thirteen Thousand

made from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside Six Hundred Five Paise

with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator Seventy One Only

(AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete

unit), Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y-

B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each

with two way selector switch incoming wires duly socket Crimped, Panel to be erected on

angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay,

thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on

angle iron frame ground on wall.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

224 1.00 S.I.T.C. submersible pump set suitable for bore of 150 mm dia or more having 3 phase Ea. 48841.58 Rupees Fourty Eight

motor capacity not less than 10 HP with following capacity. Lifting and Lowering taken Thousand Eight Hundred

extra. Fourty One Paise Fifty

[B] 20 stage 210 to 160 LPM discharge at 148 to 173 mtr head for 50 mm dia delivery pipe Eight Only

225 1.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 2996.67 Rupees Two Thousand Nine

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Hundred Ninety Six Paise

wrenches after checking of threads of each pipe with coupling to take the load of the pump Sixty Seven Only

set and pipe assembly filled up with water

(C)Above 120 mtr.

226 2.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 856.48 Rupees Eight Hundred Fifty

Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Six Paise Fourty Eight Only

wrenches after checking of threads of each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water

(D)For Open well Horizontal submersible pump set for sump well

227 40.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 146.45 Rupees One Hundred

copper cable approved make of following Size. Fourty Six Paise Fourty

(C) 3 Core x 4 Sq. mm Five Only

228 300.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 172.71 Rupees One Hundred

copper cable approved make of following Size. Seventy Two Paise Seventy

(D) 3 Core x 6 Sq. mm. One Only

229 9.00 Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using Ea. 189.88 Rupees One Hundred

insulating material, water proofing material, & making the joint complete. Eighty Nine Paise Eighty

(A) Up to 10Sq. mm Eight Only

230 30.00 Supplying of following size of HEAVY UPVC column pipe with coupler and wire lock RMT. 359.56 Rupees Three Hundred

[B] 50 mm dia Fifty Nine Paise Fifty Six

231 3.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump Per Set 1489.75 Rupees One Thousand Four

guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed Hundred Eighty Nine Paise

by Engineer - in - charge with necessary plumbing as desired. Seventy Five Only

232 1.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm Ea. 9416.23 Rupees Nine Thousand

long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse Four Hundred Sixteen Paise

current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory Twenty Three Only

as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

233 1.00 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use Mtr. 728.21 Rupees Seven Hundred

exclusively for lightning protection (Vertical Riser/Down Conductor which shall be Twenty Eight Paise Twenty

concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With One Only

Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector

used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector

to connect Earth fixing point to vertical raiser/Down conductor, SS Straight Splicer at every

4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every 3 mtr suitable for

interconnecting round conductor with reinforcement inside the concrete for structural

earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing

point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning &

Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test )

conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to

meet the requirements of IS/IEC

234 1.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as Mtr. 154.53 Rupees One Hundred Fifty

required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used Four Paise Fifty Three Only

exclusively for lightning protection earthing system and ring equipotential bonding.

235 1.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 Per Set 5992.33 Rupees Five Thousand Nine

micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as Hundred Ninety Two Paise

per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Thirty Three Only

clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

236 1.00 Supplying, Erecting, Testing & Commissioning the passenger lift having following main Ea. 1474779.78 Rupees Fourteen Lakh

features: Seventy Four Thousand

8 / 10 Passengers, Ground plus 2 upper floor with Rated Speed of 1.0 m/sec., Seven Hundred Seventy

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Nine Paise Seventy Eight

(A) GENERAL DESCRIPTION OF LIFTS.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase

V A. C. Permanent Magnet Synchronous motor of proper rating with high efficiency shall be

used.[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder

feedback closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/

Down Contactor with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain the impact load

cabin + passenger with safety factor of fire for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design suggested of engineer

in charge. of engineer in charge. Car doors shall be of stainless steel grade 304, hairline

finish with centre opening / telescopic automatic doors. Car panel will also be S.S.

finished with emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail language as

[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/

telescopic opening made of hairline finish steel grade of 304 with key holes and infrared

curtains with Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car along with alarm switch shall be

provided. Also, Emergency Light & Fan should start immediately without any Time Delay

as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator

shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity

with Manual Rescue Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over loading shall be provided such that

doors kept open till excess load is removed.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in

[14] Mechanical over speed governor with governor calibration as per actual site parameters

and submission of calibration certificate submission, door key holes in the floor doors,

fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift

pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever

required as / if directed by engineer in charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well

with proper numbers of light points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall be made available by department

in lift machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble

fixing around all landing door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for

obtaining all necessary permission from lift inspector and other authorities. [20] acrylic

transparent licence/display A4 size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift erection and provide report by

third party authorized by concern licensing authority 5.agency has to provide third party

insurance up to completion of free maintenance period and submit the document for the

[21] Car Panel Operating Buttons at an accessible height from wheelchair for handicapped

person and raised numbers with brail mark with floor position indicator/buttons must be of

Auto Glow type clearly visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade

of 304 should be provided at appropriate 900mm height on the Rear & Side Wall Panels in

Lift Car. [23] With Necessary kVA rating voltage controlled Stabilizer suitable for your

controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which

rating is sugested by CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site programming

facility, Anti nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring

system having necessary connectivity for remote monitoring & other suitable supporting

hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and

hall lantern & TFT Screen in the car with MP3 Voice Announcer.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for

car and all Doors, All landing doors must have fire rating up to 2 hours and car door must

have multi-level crisscross beam door protection.

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and

Each elevator are equipped with remote monitoring system.agency has to provide mobile

app and user id and password for monitoring

Amount in Words :

Rupees Four Crore Eighty Eight Lakh Seventy Eight Thousand Six Hundred Sixteen Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Contractor Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division