Balance Work for construction of 0.65 MGD water treatment plant at Hajin for WSS Hajin Town . Under Languishing .

Amount

Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in depth. 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth upto 25mtr from cutting edge, disposed earth to be levelled and neatly dressed in: All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push on joints to centrifugally (spun) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket. 150mm dia pipe

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 150mm dia D.I pipes

Providing and fixing of 150mm dia D.I bend 120°/ 110° complete job as directed by site Engineer incharge

Making connections with laid pipes at spots incld. cost of flanged joints, cutting of pipes, cost of nuts, bolts etc complete job as directed by site Engineer incharge

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Providing and laying stone soling hand packed on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone) aggregate 20mm nominal size Crushed.

Brick work with common burnt clay F.P.S (non-modualar) bricks of class designation 75 in foundation and plinth in : Cement mortar 1 : 4 mix (1 cement : 4 fine sand)

Extra for brick work in super structure above plinth level above plinth level upto floor V level. (by manual level)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level including curing but excluding cost cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement :1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars)

Centering and shuttering including straightening propping etc, and removal of form work for: Foundations, footing, bases of columns etc for mass concrete

Centering and shuttering including straightening propping etc, and removal of form work for: Suspended floors, roofs, landings, balconies and access plate form

Centering and shuttering including straightening propping etc, and removal of form work for: Edges of slabs.

Centering and shuttering including straightening propping etc, and removal of form work for: Columns, piers, abutments etc

Centering and shuttering including straightening propping etc, and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Dismentalling of side RCC wall of channel (inlet and out let) of PST upto required depth incld. making the lip edge good with rich mix cement concrete/plaster to make rest/view to flow the raw water in/out of PST, length of each cahnnel 11 mtrs or the depth of the channel to be cut is on 20cm. complete job incld. levelling of top complete job

Providing and laying of 250mm dia M.S pipe with performation of required dia to be provided at site during execution of the job to be blind flanged on either side incld. making of tee for flaging with raw water intake 250mm dia pipe (rising main) cost of blind flange etc inclusive incld. cost of nuts, bolts and rubber insertions and cost of 10mm thick M.S flange inclusive complete job to be paid in filled fixed and coming from with red oxide primer complete job as directed by site Engineer incharge

Errection of 50mm dia pipe for filling point upto a height of 3mtrs from ground incld. making of bends of required shape incld. cost of flanges 10mm thick. Making of side support make of ISA 50x50x6 angle with struts to be embended in : 2 : 4 incld. earth work excavation. The nut of the angle Iron support shall be 3mm thick incld. cost of 50mm dia heavy duty ISI mark Gate Valve coimplete job

Providing and fixing of M.S extension rods 20mm/25mm dia, 3mm thick incld. making of necessary arrangements for coupling with splinder rod of sluice valves of different dia's incld. providing and fixing of 65mm dia pedistals cut of 4mm thick pipe for operation of sluice valve complete job

Providing and fixing man hole cover made out of ISA 50x50x6 frame with 40mmx6mm flat iron, included in vertical portion incld. cost of locking arrangement and cost of one coat of red oxide primer of size of man hole on 0.90x0.90 to be embended in line of slab of sluice chamber complete job

15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing of M.S Grill around PST incld. one coat of primer of red oxide and two coats of enamelled painth. The grill to be errected after insertion of the bolts in concrete incld. welding of mason as required

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Cement/steel from Divisional store for avg. lead 15 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Soling stone for avg. lead 15 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Sand/Agg. for avg. lead 15 kms

Carriage of 150mm dia D.I pipes by Mechanical transport from source to actual site of work including loading, unloading and stacking of material for avg. lead 35 kms

shabir ahmad ganie