Kerala

To Be Opened

Works

Electrical Works

GENERAL-Kannur Municipal Corporation Septage Treatment Plant at Chelora - Providing APFC panel. -Project No. MKC-Note-30/26 (1 B)-General Electrical Work

Local Self Government Department

Kannur corporation | Kannur, Kerala

Amount: ₹1.2 LCloses: 24 Jul 2026Closed

Timeline

Published17 Jul 2026
Closed24 Jul 2026
Bid Opening27 Jul 2026

Tender Value

₹1.2 L

EMD Value

₹2,909

Closing Date

24 Jul 2026, 6:00 pmClosed

Tender Inviting Organisation

Name

EE Kannur Muncipal Corporation

Address

Kannur Municipal Corporation

Work Description

GENERAL-Kannur Municipal Corporation Septage Treatment Plant at Chelora - Providing APFC panel. -Project No. MKC-Note-30/26 (1 B)-General Electrical Work

Tender Information

Tender ID

2026_LSGD_861159_4

Reference Number

E7-DB/TN-02(4-A)/2026-27 Dated 17.07.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

90 days

Location

Kannur corporation

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredForm of tender (.pdf)

RequiredAffidavit and Integrity pact (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredE Payment Form (.pdf)

RequiredRegistration, PAN and GST (.pdf)

RequiredSBD with NIT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹2,909

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

17 Jul 2026

Published

17 Jul 2026

Bid Opening

27 Jul 2026

Download Starts

17 Jul 2026

Download Ends

24 Jul 2026

Submission Starts

17 Jul 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (33 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Panel Boards
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	1	sqm	-	-
1.002	90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	-	metre	-	-
1.004	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	-	-
1.005	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	-	-
1.006	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	-	-
1.007	90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL	-	no	-	-
1.008	90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A	-	no	-	-
1.009	2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N	-	each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.15 MB

Work Item Documents

viewnitpanel.pdf

Tender Documents • 0.02 MB

viewsbdpanel.pdf

Tender Documents • 1.82 MB

BOQ_1456382.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Panel Boards
1.001	90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)	1	sqm	-	-
1.002	90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.	-	sqm	-	-
1.003	90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet	-	metre	-	-
1.004	90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board	-	kg	-	-
1.005	90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.	-	Cum cm	-	-
1.006	90.14.7:Supply and providing copper earth bus in the panel board	-	Cum cm	-	-
1.007	90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL	-	no	-	-
1.008	90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A	-	no	-	-
1.009	2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N	-	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Panel Boards

1.001

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

sqm

1.002

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

sqm

1.003

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

metre

1.004

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

1.005

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Cum cm

1.006

90.14.7:Supply and providing copper earth bus in the panel board

Cum cm

1.007

90.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

1.008

90.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

1.009

2.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

each