Installation of firefighting systems in Planetarium building at Kerala State Science and Technology Museum

OD40692/2025-2026 Supply, erection, testing and commissioning of main diesel engine driven pump, centrifugal type suitable for automatic operation. They shall be rated for 2280 LPM at 80 head, volute type with cast iron casing, C.I impeller. The pump shall be coupled to a suitable industrial diesel engine. The engine shall be of continuously rated for the operation of the pump load. The engine shall be of direct injection four stroke sixcylinder, water cooled. The pump accessories include the fitments such as coupling, coupling guard, baseplate, foundation vibration damping arrangement, bolts etc. Accessories for engine include instrument panel with rpm indicator, Ammeter, oil pressure guage, starter pressure switch and standard fuel tank, tool kit, battery system, battery leads, etc. Make: LUBI/LHP/Kirloskar

OD40700/2025-2026 Supplying, installation, testing and commissioning of Electric Motor Driven Pump suitable for automatic operation rated for 2280 LPM @ 80 mtr Head, with high efficiency, volute type with cast iron casing, cast iron impeller Coupled to a squirrel cage induction motor, spdp /Monobloc type having suitable hp. The operating voltage is 415v 3 phase 50 Hz. The pump set is of foot mounted type including all accessories such as standard coupling, coupling guard, common base frame, foundation bolts, including cabling to panel etc complete.Make: LUBI/LHP/Kirloskar

OD40702/2025-2026 Supply, erection, Testing and Commissioning Electrically driven Mono block Jockey Pump of capacity 180 LPM, @ 80 mtr Head with all the necessary accessories operating on 3 Ph. 50 Hz. 415 V AC supply including foundation, bolts, cabling to panel etc. complete. Make: LUBI/LHP/Kirloskar

OD40691/2025-2026 Supply, installation, Testing and commissioning of Air cushion vessel made of MS 150 MM DIA pipe 120 cm in height with anchor fabricated stand and valves for drain and filling and connected to common header and made functional-MAKE : Fabricted

OD40695/2025-2026 Supply, installation, testing and commissioning of Pressure Gauge. Make: H-Guru / National

OD40701/2025-2026 Supply, installation, testing and commissioning of Pressure Switch for automatic operation.Make: Indfoss/danfoss

OD40704/2025-2026 Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standard lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc. complete. - 150 mm dia (Make:Kartar/Normex/InterValve/EQLNT )

OD40694/2025-2026 Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standard lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc. complete. -100 mm dia ( Make:Kartar/Normex/InterValve/EQLNT )

OD40696/2025-2026 Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standard lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc. complete. -80 mm dia (Make:Kartar/Normex/InterValve/EQLNT)

OD40693/2025-2026 Supplying, Installing, testing and commissioning CI Butterfly valve slim seal standard lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc. complete.-50 mm dia (Make:Kartar/Normex/InterValve/EQLNT)

OD40698/2025-2026 Supply, installation, testing and commissioning of C.I. Non-Return Valve slim seal type with required flanges, nuts & bolts, gasket etc. complete - 150 mm dia (Make: Kartar/Normex/InterValve/EQLNT )

OD40703/2025-2026 Supply, installation, testing and commissioning of C.I. Non-Return Valve slim seal type with required flanges, nuts & bolts, gasket etc. complete - 100 mm dia (Make: Kartar/Normex/InterValve/EQLNT )

OD40697/2025-2026 Supply and Installation of the following sizes of cast iron Foot valve for pump sets complete with bolts, nuts, gaskets etc.(for breaching inlet line) - 100 mm Dia ( Make: Kartar/Normex/Inter Valve/EQLNT )

OD40679/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. 150 mm Dia ( Make: Jindal )

OD40662/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. 100 mm Dia ( Make: Jindal )

OD40669/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade. 80 mm Dia ( Make: Jindal )

OD40671/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M.S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade-65 mm Dia ( Make: Jindal )

OD40666/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade-50 mm Dia ( Make: Jindal )

OD40664/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade-40 mm Dia ( Make: Jindal )

OD40683/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade-32 mm Dia ( Make: Jindal )

OD40670/2025-2026 Above Ground Piping: Supply, erection, testing and commissioning of M. S’B' class Pipes confirming to IS :1239 part - I with malleable specials confirming to IS:1239 part - II, such as elbows, reducers, flanges etc. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports, the pipe shall be painted with one coat of primer and two coats of synthetic enamel paint of approved colour / shade-25 mm Dia ( Make: Jindal )

OD40673/2025-2026 Supply, installation, testing and commissioning of instantaneous pattern SS Single Headed Hydrant valve of 63mm Dia, oblique type, instantaneous hose coupling adaptor with PVC blank cap etc. With ISI mark.( Make: Kartar/NewAge/Omex )

OD40674/2025-2026 Supply and placed in position of SS Branch Pipe, 63mm female instantaneous inlet,male threaded outlet, with hexagonal base nozzle. With ISI Mark.( Make: Kartar/NewAge/Omex )

OD40685/2025-2026 Supply and placed in position of ISI Marked Controlled Percolated Hose conforming to IS: 636, 63mm dia, 15 Mtrs length with heavy duty 63 mm pair of S.S male and female couplings with ISI MARK etc. ( Make: Kartar/ NewAge/ Omex )

OD40684/2025-2026 Supply, installation, testing and commissioning of Hydraulic Hose Reel drum completed with swinging type drum with 19mm dia Rubber braided hose of 30M. length and Shut off nozzle, as per EN standards with necessary fittings etc. complete. (Make: Kartar/NewAge/Omex)

OD40678/2025-2026 Supplying, installing, testing and commissioning of forged brass ISI Marked Ball valves with fittings of screwed end type. - 20mm Dia ( Make: Kartar/Eqlnt )

OD40663/2025-2026 Supply, installation, testing and commissioning of Double Door Hose Cabinet to accommodate one piece of hose pipe along with one pair of male and female coupling and one branch pipe. The cabinet is made of 20swg M.S Sheet, glass fronted with hinged door and lock. The cabinet is spray painted to scarlet red color.(Make: Kartar/New Age/Omex)

OD40665/2025-2026 Supply, installation, testing and commissioning of single acting Air Release Valve with screwed inlet 20 mm dia etc.(Make: Atam/kartar )

OD40672/2025-2026 Supply, installation, testing and commissioning of Fire Brigade Inlet connection with 4nos of 63 mm dia. built - in SS metal non-return valves instantaneous coupling type arranged on 100 mm dia.etc. Pipe manifold shall be connected to wet riser main. (Make: Kartar/New Age/Omex)

OD40675/2025-2026 Supply, installation, testing and commissioning of TANK FILLING INLET connection with 4 nos of 63 mm dia. built - in SS metal non-return valves instantaneous coupling type arranged on 150 mm dia etc. Pipe manifold shall be connected to wet riser main. Rate includes cost of all labour, materials, scaffolding charges, loading and unloading charges, conveyance, consumables, tools, machineries, all lead and lift etc. Complete as per the approved drawings, standards and direction of Company's Engineer in charge

OD40676/2025-2026 Supply, installation, testing and commissioning of DRAW OUT CONNECTION built - in SS metal with 100 mm dia pipe. Rate includes cost of all labour, materials, scaffolding charges, loading and unloading charges, conveyance, consumables, tools, machineries, all lead and lift etc. Complete as per the approved drawings, standards and direction of Company's Engineer in charge.

OD40682/2025-2026 Supply,Installation,Testing and Commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell and trims as required 150mm (Make: New Age/HD)

OD40687/2025-2026 Supply, installation, testing and commissioning of Sprinkler bulb 15mm size, having temprating 63 deg.C made out of forged brass and SS decorative finish with rosett plate and supports. -Pendant Type/Side Wall ( Make: Kartar/New Age/O mex )

OD40680/2025-2026 Supply, installing, testing and commissioning of Flow switch on sprinkler distribution header on each floor and shall be connected to Fire alarm panel through cable. Instead of flow switch shall we mention it as zone valve with test drain assembly

OD40668/2025-2026 Supplying, and fixing of ABC type fire extinguisher of 4 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, discharge hose, wall mounting bracket etc. With ISI Mark. (Make: Kartar/New Age/O mex)

OD40681/2025-2026 Supplying, and fixing of CO2 type fire extinguisher ISI mark ,4.5 kg capacity with initial charger and installation brackets.

OD40667/2025-2026 Supply, Installation of Fire Extinguisher ABC type Modular fire extinguisher ISI mark ,5 kg capacity with initial charger and installation brackets. Rate includes cost of all labour, materials, scaffolding charges, loading and unloading charges, conveyance,consumables, tools, machineries, all lead and lift etc. Complete as per the approved drawings, standards and direction of Company's Engineer in charge.

OD40677/2025-2026Supply, Installation, Testing and Commissioning of type stainer with CI body 150 mm dia

OD40686/2025-2026 Supply, installation, testing and commissioning of Water Monitor

OD40706/2025-2026 Supplying, and fixing of Addressable 4 LOOP 4 slot Fire Alarm Control Panel as per the technical specification land not limited to having Visual Display Unit (VDU) preferably 640(character LCD display with battery back up for 24 hours for normal (operation and 1 hours on alarm condition. The control panel, battery Nos charger etc, shall be UL listed / LPCB approved. The panel shall work in a flash scan protocol and shall be capable of networking with other compatible panels. (Make: Ravel/Ases/eqlnt )

OD40712/2025-2026 Supply,Installation, testing and commissioning of Manual Call Point break glass type as per standrad specification. (Make: Ravel/Ases/eqlnt)

OD40710/2025-2026 Supply, install, test and commission Addressable Type Horn rated at 82 dB @3Mtr. for audible annunciation and 75Candela flashing at 1Hz. for visual indication. Make: Ravel

OD40707/2025-2026 Supply, install, test and commission 2core x 1.5 mm2 FRLS unarmored Cables. (Approximate Quantity) (Make: Gloster/Polycab/Eqlnt )

OD40709/2025-2026 Supply, install, test and commissioning of Addressable Fault Isolator as per specification (Make: Ravel/Ases/eqlnt )

OD40705/2025-2026 Supply, install, test and commissioning of Intelligent Addressable Control /Input/Monitor Module (Make: Ravel/Ases/eqlnt )

OD40711/2025-2026 Supply, install, test and commissioning of External Power Supply Unit,24V, 5/6Amps. DC, with 7Ah. Battery Backup, for sounders, /sounder bases,etc (Make: Ravel/Ases/eqlnt )

OD40690/2025-2026 Supply, Installation, Testing and Commissioning of Public Address Speaker Cum Talkback unit with necessary required accessories(Make: Ravel/Agni/Seculite/Ases/Innovative)

OD40688/2025-2026 Supply, install, test and commission 2core x 1.5 mm2 FRLS unarmored Cables. (Approximate Quantity) (Make: Gloster/Polycab/Eqlnt )

OD40661/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm - FIRE EXIT

OD40659/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm - FIRE DUCT

OD40660/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm -EXIT

OD40658/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm -FIRE COMMAND CENTRE

OD40656/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm -ASSEMBLY POINT

OD40657/2025-2026 Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Nonreflective self-adhesive vinyl painted foam board. indicating the following boards, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm -LIFT

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.6 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of : i) I course of applying cement slurry @ 4.4 Kg/ sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) II course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) III course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. iv) IV course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/ sqm

50.18.9.13.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

50.18.9.15.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall

50.18.9.16.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall

OD40762/2025-2026 Supply and fixing 1" PVC valve and other accessories

OD40760/2025-2026 Supply and fixing 1.5" PVC valve and other accessories

OD40764/2025-2026 Supply and fixing 2" PVC valve and other accessories

OD40761/2025-2026 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 40mm dia Elbow

OD40763/2025-2026 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 40 mm dia Tee

OD40759/2025-2026 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 50 mm dia Elbow

OD40765/2025-2026 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 50mm dia Tee

OD40766/2025-2026 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 50x40 mm dia Reducer

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

19.18.1 Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

14.1.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

9.147C.1 Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

OD40789/2025-2026 Supplying and fixing Chequered plate 3MM Thickness fixing in position and applying a priming coat of approved steel primer all complete

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.6.1.8 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

5.9.5 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

50.13.1 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, Grey Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

9.1.3 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated Hollock wood

9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters

9.48.2 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete

9.55.1 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc, complete:125x65x2.12 mm

9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm

9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.7.4 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.7.6 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 16 sq. mm + 1 X 6 sq. mm earth wire

90.11.1.21 Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required12 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.3 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.14.3 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

OD40807/2025-2026 Supplying and fixing Single Tube set ( Electronics ) and other accessories

OD40806/2025-2026 Supplying and fixing 48" Ceiling fan and other accessories

Preparation Of Fire Drawing And Sanction Taken From Fire Force Including Applicable Fees Etc Complete