ANNUAL RATE CONTRACT FOR MAINTENANCE, REPAIRING AND FEBRICATION WORK OF M.S.RALLING, G.I. CHAIN LINKS AND OTHER WORKS ON VARIOUS ROADS OF EAST (VARACHHA) ZONE-A AREA.

NAME OF WORK :- ANNUAL RATE CONTRACT FOR MAINTENANCE, REPAIRING AND FEBRICATION WORK OF

M.S.RALLING, G.I. CHAIN LINKS AND OTHER WORKS ON VARIOUS ROADS OF EAST (VARACHHA) ZONE-A

ITEM Qty. GST & Per Amount

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all lift,

1 watering etc. Comp. (A) Loose or Soft soil ,Executed With Mechanised 50.00 123.13 C.M.

Efforts / Machinaries

(1) 0.0 to 1.5 mt. depth.

Demolition of brick work and stone masonry including stacking of

2 serviceable materials and disposal of unserviceable materials with all 50.00 577.92 C.M.

lead and lift. (i) On Cement Mortar.

Demolition including stacking of serviceable materials with all

(i)) RCC Work 30.00 1,110.75 C.M.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

4 work incl. bending, binding & placing in position etc. comp. Upto 200.00 77.29 Kg.

Brick work using common burnt clay building bricks having crushing

5 strength not less than 35 kg./Sq.Cm. in foundation and plinth in 10.00 4441.11 C.M.

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement

: 1- sand) etc. complete.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form

7 work but exclu. Cost of reinforcement for reinforced concrete work in : 30.00 3741.69 C.M.

(A) Foundation,footing, Base of columns and Mass concrete.

Fabricating and fixing in position MS railing using structural steel

TATA/JINDAL/ Asian sections of YST 310 grade using hollow box

sections, plates, angles, tees, pipes, MS square polished bars as per

drawing. The rates shall include all kinds of welding, nut bolting, anchor

bolting and grouting the bolts using non-shrink cementitious grouts of

Sika or Fosroc make or The contractor shall be responsible in erecting

8 the railing assembly in the desired line, level and alignment. The railing 450.00 1749.00 RMT

shall be firmly fixed to the foundation concrete blocks and shall be in

place once fixed. The rates excluding excavation and foundation

concrete and including for marking of foundation pits, placing the

same in alignment of the road as directed by the Engineer in charge

and or as per drawing with Priming coat of Red lead paint etc. comp.

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Applying Priming coat over new steel and other metal surface after

over and including preparing the surface by throughly cleaning oil,

10 grease dirt and other foreign matter and scoured with brushed fine 5000.00 36.74 S.M.

steel wool, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Providing and fixing interlocking type Rubber Moulded cement

concrete paver block of approved shape, design and colour having

mm thickness (M-35), purchased from SMC's approved paverblock

manufacture only and fixing on fine sand bedding. Item includes

11 levelling by using plate vibrator compactor machine. Item also includes

all material colour, equipments, tools, plants, curing, watering,

cleaning, test required to be carriedout etc. complete.

With colour 40.00 524.00 S.M.

Without colour 40.00 524.00 S.M.

ITEM Qty. GST & Per Amount

Providing & fixing interlocking type Cement Concrete paver block of

approved shape & design having 60 mm thickness (M-40) purchased

from SMC's approved paverblock manufacturer only on fine sand

12 bedding. Item includes leveling by using vibratory plates compacted

machine. Item also includes all materials, Labour, euipments,

tools,plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 40.00 714.00 S.M.

Steel work welded in built up sections, framed work including cutting

,hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like.

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage

thick with nuts, bolts, washer or G.I. pins, excluding M.S. angles

etc.complete as per relevent IS specification & directed by engineer in

charge. (TATA or Jindal Make)

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in

15 1:1.5:3 concrete also horizontaly in line and connecting to purline 50.00 485.00 R.M.

angle etc by welding rereting etc. (a) Medium duty "B" Classss

Providing Supplying & Fixing jumbo swiss type traffic bollard made out

of 1.5 mm thick CRC sheet in conical shape having 188cms, bottom dia

30cms, top dia 22cms, with top circular direction plate of 30cms dia for

arrow fabricated as per attached drawing and coated with black epoxy

16 powder coating and Retro reflectorised three yellow strip 15cms wide 20.00 3729.97 NOS

and arrow Micro Prismatic grade sheeting as per ASTM 4956-09 Type-

XI Fixing with cement concrete M-25 grade, Foundation size

30cm*30cm*35cm as per the instruction of Engineer in charge.

Providing and Fixing of powder coating red matt finished MS pipe

bollards made from 100mm O.D & 7.5mm thick M.S pipe having length

of 1050mm, 3mm deep, 25mm wide groove covered by 25mm wide

white retro reflective strips hollow section shall be filled with cement

17 concrete foundation inclusive of excavation, fixing, refilling of 30.00 1610.00 NOS

excavated material, grouting with cement concrete and anchar bar/

anchar fastner (hilti or equivalent), removal of debris etc as shown in

drawing and directed by Engineer in charge. (Sample must be

Signage Pole (Safety Bollard) for Junctions (M.S.Cylindrical pipe of

approved brands) of Size, 8 inch Dia, height-8feet. Wall thickness of

pipe 3mm with base plate of 12mm M.S. base plate, round shape, cut

holes on surface. M.s cleats welded with base plate & pole surface of

90 deg. includes 4 nos. Bolts to fasten the pole & ground, with

18 chemical filling. work includees rectro reflective vinyl, Red/Blue & 10.00 10170.00 NOS

White High density, High grade 3M or equivalent-Diamond grade

Displaying: BRTS Letters with Arrow & Bus logo on the middle Blue

background with read & white band type display on top & bottom as

per the approved design. shall be installed over flexible or rigid

pavemen. As per instructions of engineer in charge.

Supplying of Molded Shank Raised Pavement Markers made of

polycarbonate and ABS molded body and eflective panels with micro

prismatic lens capable of providing total internal reflection of the light

entering the lens face and shall support a load of 16000 kg tested in

accordance to ASTM D 4280 Type H and complying to Specifications of

Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt

11.06.1997. The height, width and length shall not exceed 50 mm,

19 mm and 100 mm and with minimum reflective area of 13 Sqcm on 300.00 217.40 No.

each side and the slope to the base shall be 35 +/- 5 degree. The

strength of detachment of the integrated cylindrical shanks, (of

diameter not less than 19 +/- 2 mm and height not less than 30+/-

mm) from the body is to be a minimum value of 500 Kgf. Fixing will be

by drilling holes on the road for the shanks to go inside, without nails

and using epoxy resin based adhesive as per manufacturer’s

recommendation and complete as directed by the engineer. 3M or

Equivalent Brand)

ITEM Qty. GST & Per Amount

Supply and Fixing of Flexible Median Marker (FMM) from a

combination of tough, high impact resistant engineering thermoplastic

material with U shape structure having rebound/bounce*back

property having overall height, width and body thickness not less than

181mm, 120mm, and 6.5mm respectively The flourscent yellow retro

reflective sheeting meeting ASTM D4956 Typ-XI specifications, in the

20 FMM helps to highlight the medians and increase the visibility during 10.00 271.69 No.

the night. The flexible Median Marker should have integrated shank

having depth of min 30mm and a dia min 20mm fixed by drilling a hole

on the kerb for the shanks to go inside, without nails and using epoxy

resin based adhesive as per manufacturer's recommendation and

complete as directed by engineer in charge.(3M or Equivalent Brand)

Providing and laying cement concrete cast-in-situ Guard Stone

(1:1/2:3) (1 cement : 1/2 coarse sand : 3 graded stone aggregate of

mm nominal size) including cost of form work including, curing labour

,machinery, equipments required to execute this item etc. complete.

Providing and laying cement concrete cast-in-situ Guard Stone (1:2:4)

(1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

nominal size) including cost of form work including, curing

22 labour,machinery, equipments required to execute this item etc.

Dismantling / Cutting of Road divider railling including T&P and

scaffolding wherever necessary, sorting the dismantled material,

disposal of unserviceable material and stacking the serviceable

material with all lifts and lead of 1000 metres)

Repairing / Reinstalling / Welding Old railling including T&P and

scaffolding wherever necessary, sorting the dismantled material,

disposal of unserviceable material and stacking the serviceable

material with all lifts and lead of 1000 metres)

Executive Engineer

East(Varachha)Zone-A

Signature of Contractor Surat Municipal Corporation