GE AF/AMB-T-37/2023-24 REPAIR/ REPLACMENT OF JOINERY FLOORING, DADO, PLUMBING, ALLIED B/R WORKS AND CAMOUFLAGE PAINTING TO RIGID PAVEMENT/ DISPERSAL AND SECURITY WALL AND WATCH TOWER IN TECHNICAL AREA UNDER GE (AF) AMBALA

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless area of each tile exc 0.06 but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for vetrified ceramic tiles 10mm thick in light/dark shade (square/rectangular) area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm th in cement mortar 1:6 complete all as specified and directed.

All as per item No 4 above but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat complete all as specified and directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level complete all as specified.

M & L for 100mm thick PCC 1 :4 :8 type D-2 ( using 40mm graded stone agg ) as in sub base of floors complete all as directed.

M&L 40mm thick PCC 1:2:4 type B 1 using 20 mm graded stone agg as in floor finish even and smooth using extra cement complete all as directed.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 20 mm graded aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement complete all as specified.

M&L for PCC (1 : 2 : 4) type B0 using 12.5mm graded mechanically crushed stone agg as in roof kerbs, mud stop, benching, padding and the like complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for Sand filling under floors/ firing range,Pavement or in foundations including watering and consolidation.

Material and labour prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete, laying over 25 mm thick sand cushioning, with the crushing strength not less than 250 Kg/Sqcm of approved design and shape, complete all as specified and directed

M&L for 20mm thick granite stone slab as in shelves over cooking plateform, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 20mm thick screed bed in CM 1 : 6 etc complete all as directed.

All as per Item 14.00 here-in-above but on vertical surface such as dado, skirting etc over 10 mm thick screed in CM 1:4.

Demolition of brick work built in cement mortar including all quoins arches pillars etc and removing from site as directed.

M&L brick work with sub class 'B' brick (old size) straight or curved on plan exc 6m mean radius in CM (1:6) complete as directed.

All as per srl item No 17.00 here-in-above but except bricks

M&L brick work as in half brick thick wall with sub class 'B' brick (old size) straight or curved on plan any radius in CM (1:4) complete as directed.

Taking down cement plaster on brick wall including racking out joints,soffits of slabs/chajja/sunshaded hacking for keys, scrubbing down with water etc complete as directed.

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cement finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick cement plaster in CM 1:4 in the soffits of slabs/chajjas/sunshade etc and finishing the surface even and smooth without using extra cement complete all as specified.

Supply only Dr fixit integral WPC /liquid complete all as specified and directed.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

M&L for preparing newly plastered surface of walls and applying two coats of exterior acrylic paint (water based) over a coat of primer in camoflaging pattern of any shade and pattern complete all as specified and directed.

M&L preperation of new plastered surface of walls and applying three coats of white wash as directed.

M&L for preparing newly plastered surface and applying two coats of distemper oil emulsion over a coat of primer 1mm putty complete all as specified and directed.

M&L preperation of new plastered surface of ceilings and applying three coats of white wash complete all as specified and directed.

Dismantling of boarding including fillets of any description fixed in any position with nails/screws etc complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixed at site on PVC frame as per specification and dwg complete all as specified and direcrted.

S&F 5mm thick PVC sheet fillets of width 35mm for wall penelling inclusive of fixing on to wall to make PVC frame etc complete all as specified and direcrted.

Demoliton of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets ) any thickness, including cover fillets.

S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves at appx 900mm cenetre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each swith lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified including 9 to 10mm thick ceiling tiles/board for insulation and accoustic purpose of size 600 x 600mm decorative type with silver foil coating on back side complete all as specified and directed. Ceiling board should of make : Saint Gobian/Armstrong/Gysboard/Hilux/Kingston for insulation and accoustic purpose fixed with staples with on snap grid and 4mm dia GI wire with nuts, bolts, adjustable arrangement and washers etc complete all as specified and directed.

S&F in repair 20mm dia powder coated MS curtain rod with require brackets, decorative piece on ends with teak finish appreance etc complete all as specified and directed.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

M&L in repairs venition blinds roller curtain 1mm thick flap with adjustable arrangements for vertical/horizontal movements including all necessary fittings for windows as per approved design complete all as specified and directed.

Supply and fixing in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as specified.

Supply and fixing in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe , flush pipe and waste pipe , CP urinal spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixing in repairs, vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

Supply and fixing in repairs coloured oval type wash hand basin, size 580x450 mm, wliile, flat back, irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed .

Supply and fixing in repair CP grating of size 125mm complete all as directed.

Supply and fixing in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

Supply and fixing in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed..

Supply and fixing in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete as specified.

Supply and fixing in repairs fancy type stop valve/angle valve/concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes of 15mm bore complete all as specified and directed.

Supply and fixing in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 20mm bore pipe, complete all as specified and directed.

Supply and fixing , 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

Refixing old steel tubing 15mm bore and connections (taken out GI tubing from item No. 50 above) in new or old position (walls, ceiling, floors, etc) incl cleaning.

Supply and fixing, 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete as specified and directed.

Refixing old steel tubing 20mm bore and connections (taken out GI tubing from item No. 51 above) in new or old position (walls, ceiling, floors, etc) incl cleaning.

Dismantling old unserviceable RCC/PVC water tank of capacity exc 250 but n. exc 500 ltrs cpacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed.

S&F in repairs110mm dia PVC (SWR) pipe single sicketed in any length with rubber ring joints laid in trenches or in floors/fixed to walls complete all as specified and directed.

Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, complete all as specified.

Supply and fixing in repairs UPVC floor trap suitable for 75 mm external dia, type-B pipes, ISI marked complete all as specified.

Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, ISI marked complete all as specified.

Supply and fixing in repairs PVC coloured/white water closet seat cover with & including mild steel chromium plated hinging device & rag bolts, complete all as specified.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm incl dismantling of brick work for hold fast complete all as specified and as directed.

Taking down Chowkats With shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but not exc 4 sqm incl dismantling of brick work for hold fast complete all as specified and as directed.

S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter sliding and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE : 100 X 44 X 1.60 MM THICK

S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter and aluminium guard bars ech shutter having two numbers aluminium hinges 100mm long , aluminium handle of 100mm size , 150mm long two Nos aluminium tower bolts and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE : 100 X 44 X 1.60 MM THICK

S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM

S&F anodised aluminium partition wall or fixed type window/ventilator made out of aluminium anodised standard hollow section 100 x 44 x 1.60mm thick snap fit beading standartd rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etc complete all as specified and as directed.

S&F anodised aluminium grill of approved design/pattern fixed to aluminium frame work complete all as specified and as directed.

S&F 30mm thick factory made flush shutters , solid core construction , with block board core and ply wood face panels commercial type on both sides fixed to chowkhats etc complete all as specified and as directed.

Supply and fixing to chowkats, 35mm thick, 1st class soft wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).

Supply and fixing MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W (Gde E-250 quality 'A') complete all as specified and as directed.

Supply and fixing Solid PVC Door frame of size 50 mm x 47mm made out of 5mm thick wooden grain printed PVC sheet reinforced with MS square tubes , supplied and fixing in opening as per specification and Drg complete all as specified and as directed.

Supply and fixing factory made solid panel PVC wood grain printed door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge. Make : RAJSHREE/SINTEX (MAKE SHOULD BE ENGRAVED ON ITEM )

S&F but hinges stainless steel 100mm long medium weight etc complete all as specified and directed.

S&F aluminium anodised extruded fabricated type handle 150mm long etc complete all as specified and directed.

S&F aluminium alloy , anodised , sliding door bolt with hasp , staples (bolt type) 250mm long and fixing with bolts extruded sections etc complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed etc complete all as specified and directed.

Hacking out old broken glass (any thickness) size , qauality or description from wooden/steel frames etc complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows complete all as specified and directed. .

All as per srl item No 80.0 here-in-above but as in repair complete all as specified and directed

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for complete removal of existing treatment from plastered or unplastered surfaces of walls and applying three coats of white wash etc complete all as specified and directed.

M&L for complete removal of existing treatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm putty complete all as specified and directed.

S&F in repair aluminium alloy door closer hydraulically regulated , designation No 2 universal type, suitable for door shutter of 701 to 850mm in width and wt between 36 to 60 Kg and fixed to door frame complete all as specified and directed. .

M&L for taking down of rolling shutters (area of rolling shutter not exceeding 10sqm each) and refixing same to its original position after cleaning all parts, staightening rails, etc. changing damaged / worn out strips, helical springs, etc. as required and greasing / oiling all movable parts complete all as specified and as directed

M & L for Cleaning of chocked sewage line of 150mm dia including cleaning of drains by well flushing with water, taking out waste materials and removing the sludge materials as directed by Engineer in Charge and disposed off beyond Municipal corporation area.

M & L for Cleaning and removing all scale and dirt etc from static water tank of capacity 45001 to 60000 liters approx including bailing out water and applying two coats of Cement based Paint on old decorated plastered surface complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt etc from static water tank of capacity 30000 to 45000 liters approx including bailing out water and applying two coats of Cement based Paint on old decorated plastered surface complete all as specified and as directed.

Cleaning of septic tanks and manholes by means of removing silt, sludge etc and taken off the site including pumping foul water from septic tanks and manhole manually or mechanically complete all as specified and directed by Engineer -in charge.

M & L for Chequered/Designer cement concrete tiles 20mm thick,set, jointed and pointed in neat cement slurry in floors with pigment over a screed bed of 15mm thick in CM 1:6

Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

Material & Labour for complete removal of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

Taking down cement plaster from brick or stone wall etc including racking out joint, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.

Supply only Dr fixit integral water proofing comound/liquid etc complete all as specified and directed by Engr-in-Charge.

Material and labour for applying one coat of white wash on plastered or unplastered old decorated surfaces on wall at any height in Bldgs / Blast Pens incl preparation of surfaces and filling all holes with putty etc complete all as specified and directed by Engr-in-Charge

All as per item No 98.00 (here-in-before) but as on ceilling at any height in Bldgs / Blast Pens complete all as specified and directed

Material and labour for 15 mm thick Rendering on brick work or concrete surfaces in CM 1:6 finished even and sommoth without using extra cement complete all as specified .

M&L Prepration of newly plastered surface of any description and applying two coats of distemper oil emultion over a coat of alkali-resistant primer over 1 mm putty complete all as pecified and directed by Engr-in-charge.

M&L for complete removal of existing treatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali-resistant primer over 1 mm putty complete all as specified and directed.

Material and labour for preparation of surfaces and applying one coat of synthetic enamel paint on old painted wooden surfaces of any description exc 10cm width or girth etc complete all as specified and directed by Engr-in-Charge.

Parveen Kumar

Durga Enterprises

M/S SHASTRI BUILDERS AND ENGINEERS