Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58,860.86Accepted-AOC | ₹58,860.86 | L1 | Accepted-AOC accepted by committee |
| 2 | L2₹62,850.14Rejected-Finance | ₹62,850.14 | L2 | Rejected-Finance REJECTED BY COMMITTEE |
| Sl No | Description | Qty | Unit | MOHAMMED ASIF M A L2 | Abdullakutty L1 |
|---|---|---|---|---|---|
| 1.00Homeo hospital maintenance | |||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 140.2 | kg | 200 ₹28,040.6 | 194.27 ₹27,237.24 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 26.29 | kg | 200 ₹5,257.6 | 187.05 ₹4,917.17 |
| 1.00 | OD453210/2025-2026:Providing and fixing 0.35mm GI trafford powder coated sheet (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm(+0.05%),total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required | 17.52 | sqm | 800 ₹14,020 | 713.17 ₹12,498.3 |
| 1.00 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.05 | cum | 8,600 ₹464.4 | 8,569.14 ₹462.73 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 0.9 | sqm | 400 ₹360 | 369.76 ₹332.78 |
| 1.01 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 5.6 | metre | 270 ₹1,512 | 248.67 ₹1,392.55 |
| 1.01 | 50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 | 5 | metre | 280 ₹1,400 | 272.5 ₹1,362.5 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 10.65 | sqm | 180 ₹1,917.54 | 164.86 ₹1,756.25 |
| 1.01 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 0.9 | sqm | 90 ₹81 | 80.85 ₹72.77 |
Tender Value
₹58,861
EMD Value
₹1,472
Closing Date
12 Feb 2026, 2:00 pmClosed
AE LID EW
VALLATHOL NAGAR GRAMA PANCHAYATH
Annual Plan-VALLATHOL NAGAR GP PRO NO 243 26 2025 26 Anganwadi Number 17 Related Works General Civil Work
2026_LSGD_832790_10
Etdr/08/2025-2026
Open Tender
Civil Works - Buildings
180 days
VALLATHOL NAGAR GRAMA PANCHAYATH
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
₹1,472
6 Apr 2026
4 Feb 2026
13 Feb 2026
4 Feb 2026
12 Feb 2026
4 Feb 2026
Homeo hospital maintenance
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD453210/2025-2026:Providing and fixing 0.35mm GI trafford powder coated sheet (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm(+0.05%),total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats
OD416812/2025-2026:PVC half round rainwater gutters 200mm dia approved make including cost of necessary fittings
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1401247.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
BOQ_1401247.xls
BOQ • 0.31 MB
AFFIDAVIT.pdf
Tender Documents • 0.24 MB
SBDNIT.pdf
Tender Documents • 2.09 MB
PREAGREE.pdf
Tender Documents • 0.25 MB
FOT.pdf
Tender Documents • 0.25 MB
Download all tender documents and submit your bid