SPL REPAIR/REPLACEMENT OF STARTER PANELS ALONGWITH CONNECTED WORKS AT WATER PUMP HOUSE, FILTER MEDIA AND CONNECTED WORKS AT ABHERA, OH LINE IN TO LT UG CABLE IN NORTHERN SECTOR AND CERTAIN MINOR WORKS AT MIL STN KOTA

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth or n exc 10 Sqm on plan and n exc 1.5 m in depth & getting out, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material (soil) n exc. 50m distance and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

M&L dry clean sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note:- Thickness after punning shall be considered for payment.

M&L for pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), class 10, laid dry and flat adjoining each other over sand cushion in trenches as protection to UG cable, complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm, laid dry and flat adjoining each other over sand cushion in trenches as protection to UG cable, complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 5 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth strip of 25x4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm bore light grade GI tubing for protection of earth strip, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 complete all as specified and directed.complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 5 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth lead strip upto 7.5 m.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5 m.

S&F in renewal of 50 mm bore Steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.

S&F of 50 mm bore Steel water tubing, light grade, galvanised, with all fitting, laid in trenches/fixed to walls/poles etc as protection to cables, with and including necessary MS clamps, nuts botls, washers etc required for fixing, complete all as specified and directed.

Taking down old unserviceable existing XLPE LT UG cables of any size /capacity complete all as specified and directed.

Supplying, laying, jointing, testing and commisioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade (ISI marked), laid in trenches / ducts / encased in GI pipe / fixed to pole/wall with necessary angle iron support, clamp, nut , bolts etc complete all as specified and directed for following cross sectional areas of cables :- Cross Sectional area of cable 120 Sqmm, 3.5 core

Cross Sectional area of cable 95 Sqmm, 3.5 core

Cross Sectional area of cable 70 Sqmm, 3.5 core

Cross Sectional area of cable 50 Sqmm, 3.5 core

Cross Sectional area of cable 35 Sqmm, 3.5 core

Cross Sectional area of cable 25 Sqmm, 3.5 core

Cross Sectional area of cable 16 Sqmm, 4 core

Cross Sectional area of cable 10 Sqmm, 2 core Notes for Srl item Nos. 13.10 to 13.80 :- (i) Excavation, earth work, sand cushioning, cable protection cover & GI pipes shall be measured and paid for separately under respective items of BOQ. (ii) Rate deemed to be inclusive of connecting up with control gear including cable glands and cable lugs.

M & L for filling gravel of size 20mm to 40mm inside existing rapid gravity filter/ pressure filter at different locations complete all as directed.

M & L for filling gravel of size 12mm to 20mm inside existing rapid gravity filter/ pressure filter at different locations complete all as directed.

M & L for filling gravel of size 6mm to 12mm inside existing rapid gravity filter/ pressure filter at different locations complete all as directed.

M & L for filling gravel of size 3mm to 6mm inside existing rapid gravity filter/ pressure filter at different locations complete all as directed.

M & L for filling coarse sand of size 0.35mm to 0.50mm inside existing rapid gravity filter/ pressure filter at different locations complete all as directed.

M & L for filling Magnese dioxide (FERRIMENIX COMPOUND) inside Activated carbon filter chamber complete all as directed.

M & L for filling activated carbon pure coconut based IV 1200 (granular form 4mm - 8mm)/Anthracite cole media inside existing activated carbon filter chamber complete all as directed.

Supply, installed, connecting and testing of 80mm bore butterfly valve, class PN 1.6 double flanged, long type, lever operated, ISI marked (IS-13095:1991, reaffirmed 2003) including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc, fixed to water mains, and including taking down old u/s butterfly valve complete all as specified and directed.

Supply, installed, connecting and testing of 50mm bore butterfly valve, class PN 1.6 double flanged, long type, lever operated, ISI marked (IS-13095:1991, reaffirmed 2003) including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc, fixed to water mains, and including taking down old u/s butterfly valve complete all as specified and directed.

Supply and installed, connecting and testing of sluice valve, class PN 1.6 double flanged CI body, wheel and brass spindle and nuts, non rising type, IS-14846 ISI marked including jointing materials such as rubber gasket, carbon steel nuts, bolts and washers etc & including taking down old unserviceable existing sluice valve complete all as specified and directed of the following sizes :- 150mm bore

100 mm bore

80 mm bore

Supply, installing, testing and commissioning high pressure single head gear motorised adjustable dozing pump 0 to 100 PSI, AC, 230 Volt, 50 Hz, 1 HP, LPH (0-25 LPH) complete with lead tubing, connecting nut, injection check valve, clay weight, ferrules along with Altoch/Alum dosing syatem consisting of 50 Ltr PE/FRP tank with lid & level gauge and agitator (1280 RPM) with shaft and blade in SS-316 on tank complete all as specified and directed. Note:- LId shall have part hole for pouring Altoch and water when necessary and provision for mounting decrine dosing pump on Lid/wall.

Supply and fixing in renewal of LED street light 70 Watt 230 V AC & fitting outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP - 65/66 protection complete all as specified and directed.

Dismantling of ACSR conductor of any description from LT poles complete all as specified and as directed.

Dismantling of cross arms of MS channel or angle iron section etc. complete all as specified and as directed.

Dismantling of insulators any type/size from LT poles complete all as specified and as directed.

S&F of terminal box made of PVC Box of size 200x160x98mm, fix on pole by means of mild steel clamps with bolt and nuts, provn for cable entry for incoming and outgoing & including 01 No. MCB 6-32 Amps and one No. 4 way connector, making necessary connections, duly fixed with and including cable glands threaded type IP66/67 made of polyamide with lock nut, complete all as specified and directed.

S&F of bus bar chamber, 4 pole, factory made using CRCA sheet of 3.15 mm thickness and epoxy powder coated with locking arrangements, comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 100 Amps rating with colour coding and mounted on porcelain insulators housed in a box of size 600x600x250 mm, including connection with LT cable with appropriate lugs, complete all as specified and directed.

S&F for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed.

M&L for complete removal of existing treatment on walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and preparation of old plastered surfaces and applying two coats of distemper oil emulsion by roller white or tinted over and including one coat of suitable primer complete all as specified and directed.

K B Enterprises (BID ID -3095082)

SINGH ENTERPRISES (BID ID -3095806)

TARKESHWAR DASS CONSTRUCTION COMPANY (BID ID -3095870)

Ganesh Contruction (BID ID -3095255)

L P Singh and Co. (BID ID -3095916)

Pioneer Enterprises (BID ID -3096102)

M/s Prem Associates (BID ID -3095940)