Supply, Erection, Testing and Commissioning of LAYING OF 11 KV DEDICATED FEEDER FOR MES/ARMY FROM RATNUCHAK AREA TO PLATA

Amount

SCOPE OF WORK FOR LAYING OF HT LINE ON 9 MTR ST POLES USING 120 Sqmm HT AB CABLE

Supply, Transportation, Erection of 9 Mtr Long ST Pole (SP-33) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

Supply, Transportation, Fabrication & Fixing of GI Channel Iron, GI V-Cross arms, GI Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.

Supply, Laying & Stringing of 120 Sqmm HT AB CABLE WITH ALUMINIUM CONDUCTOR AND 95 SQMM BM FOR 11 KV LINE WITH ONE SPARE CKT.

Heat Shrinkable Outdoor Cable Termination Kit

Suspension/Tension Clamp with eye hook

Galvanized Nuts and Bolts

Danger Plates

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .45cum /pole

Mid Span Straight Through Jointing Kit for 11 kV ABC

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

GI V cross-arm with top Bracket including clamp for 15 No poles to be inserted in longer spans

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm for 15 No poles to be inserted in longer spans

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm for 15 No poles to be inserted in longer spans

SCOPE OF WORK FOR ERECTION OF ISOLATION POINTS (2 Nos. ON TRUNK FEEDER.)

Supply, Transportation, Erection of 9 Mtr Long ST Pole (SP-33) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

GI V cross-arm with top Bracket including clamp

GI Channel/Angle Iron including clamps

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

30 mm² ACSR Conductor

PG Clamps for 30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. (for 2 No ST poles and 1 No GO Switch)

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .5cum /pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

11 KV CT/PT UNIT ALONG WITH TRIVECTOR METER

GI Channel X-arm including clamps and braces for accomodation of CT/Pt unit

Galvanized Nuts and Bolts

11 KV CT/PT UNIT of suitable ratio

TRIVECTOR METER ALONG WITH CONTROL CABLES AS PER SITE REQUIREMENT AND ANY OTHER SUNDARY ITEMS REQUIRED FOR COMMISSIONING OF CT PT UNIT

WRITE BACK OF DISMANTLED CONDUCTOR AND POLES

GUARDIAN ENGINEERS (BID ID -2362231)

M/S PVM INFRA (BID ID -2362200)