Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-Finance JABALPUR | L1 | Accepted-Finance AS PER CWC-I DECISION | |
| 2 | L2₹44.7 L+₹3.0 L (7.26%)Accepted-Finance | L2 | Accepted-Finance AS PER CWC-I DECISION | |
| 3 | L3₹50.0 L+₹8.4 L (20.1%)Accepted-Finance | L3 | Accepted-Finance AS PER CWC-I DECISION | |
| 4 | L4₹62.4 L+₹20.7 L (49.8%)Accepted-Finance 1 BAJRANG NAGAR POST VHECLE RANJHI JABALPUR MADHYA PRADESH 482002 | JABALPUR | MADHYA PRADESH | 482002 | L4 | Accepted-Finance AS PER CWC-I DECISION |
Tender Value
₹46.6 L
EMD Value
₹93,198
Closing Date
11 Mar 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHIEF GENERAL MANAGER, ORDNANCE FACTORY KHAMARIA
OFK
Repairs to toilets inside Factory at OFK
2024_MIL_187528_1
3320/EO/CONT/23-24/27
Open Tender
Civil Works
Item Rate
240 days
ORDNANCE FACTORY KHAMARIA
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹93,198
Yes
29 Jun 2024
22 Feb 2024
12 Mar 2024
22 Feb 2024
11 Mar 2024
22 Feb 2024
22 Feb 2024 - 11 Mar 2024
Amount
Demolition of brick work or stone/ boulder masonry built in cement or cement lime mortar, including all quoins, arches, pillars, etc. as per the directives of EIC.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Demolition of Cement concrete of any description and in any position not otherwise specifically provided for.
Excavating over area, in soft / loose soil; n exc 1.5 m wide and n exc 1.5 m in depth and getting out.
Excavating in trenches, soft/loose soil; n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.
Removing excavated material n exc. 100m and depositing where directed at a level n exc. 1.5 m above the starting point
M & L, Hardcore (Broken stone or boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface.
M&L, Cement concrete in foundation, filling and mass concrete type B- 2 1:2:4, 40mm graded aggregate.
Providing cement concrete Type B1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M & L, providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M & L, Providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses.
M & L, Providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M & L, Providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span.
M & L, Providing reinforced cement concrete (design mix) M-25 (20mm graded aggregate) in columns, pillars, piers, posts and struts etc.
M & L Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4.
M & L Brick works with fly ash bricks, straight or curved on planto any radius in half brick thick walls, built in cement mortar 1:4.
M & L Brick works with fly ash bricks, one brick thick honey-comb walling, built in cement mortar 1:4.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete flat.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished surfaces of concrete flat.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concrete flat.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., rough finished surfaces of concrete flat.
Formwork to side of pillars, posts, struts, piers, columns and stanchions, fair finished surfaces of concrete flat.
M & L, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M & L, Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M & L, Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
S&F, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
Taking down cement mortar plaster on brick walls or surface on concrete etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surface , finished even and smooth without using exta cement complete all as specified and directed
M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surface , finished even and smooth without using exta cement complete all as specified and directed in ceilings.
M&L, Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
15mm thick screed bed of 1:4 cement mortar set and jointed in neat cement slurry and pointed in white or coloured cement to match.
S & F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
S&F Glazed ceramic coloured tiles (350 x 250 mm) x 7mm OR 450X350X7MM in wall, set and jointed in neat cement slurry and pointed in coloured cement to match.
M&L, applying 3mm thick wall care putty on wall.
M&L, applying 3mm thick wall care putty on ceiling.
Preparation of old wall surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion as specified in clause 15.14.5 in MES SSR Pt-1 1991 as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of new wall surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion over Chalk whiting, on plastered surfaces, as specified in clause 15.14.5 in MES SSR Pt-1 1991 as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of old ceiling surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion as specified in clause 15.14.5 in MES SSR Pt-1 1991 s directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of new ceiling surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of 1st quality distemper oil emulsion over Chalk whiting, on plastered surfaces as specified in clause 15.14.5 in MES SSR Pt-1 1991and as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of old wall surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of cement paint specified in clause 15.7 & 15.15 in MES SSR part-1 1991 and as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of new wall surface including cracks filling up to 3mm plastered or unplastered brooming down etc and apply two coat of cement paint specified in clause 15.7 & 15.15 in MES SSR part-1 1991 and as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
Preparation of old steel surface of any description over 10 cm girtth or width not otherwise described and apply two coat of synthetic enamel paint and specified in MES SSR part-1 1991 and as directed by Engg In Charge ( Make and colour as approved by Engg In Charge).
M&L, Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls.
Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area N exc 150 sq cm.
Taking down chowkhat or frame not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) and removal to store.
Taking down chowkats or frame exc 1.5 sqm n exc 4.0 sqm with shutters (without taking off shutters from frame) and removal to store.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of EIC.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of EIC.
S & F, Sheet glass 4.0 mm thick, ordinary quality and glazing with existing Aluminium snap beading / glazing clips, in square / rectangular exc 0.5 sqm in each pane. Glass Make: Saint gobain/ Atul/ Asahi-float or equivalent Only.
S & F, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm.
S&F Solid PVC Door frame of size 50 mm x 47 mm made out 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing.
S&F factory made Solid PVC Door shutter 30 mm thick ( style) consisting of frame made out of M.S. square tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side etc. & fixing in the frame at site as per specification & drawing.
S&F Aluminium, anodised, barrel tower bolts 200mm length of extruded section.
S&F, 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F, 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.
S&F Alluminium alloy handles, of 150mm size cast type anodised.
Fixing only 500 ltr capacity rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed as per specification.
S& F of 500 ltr capacity rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed as per specification.
S&F, 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms)
S & F of wash basins, vitreous China (flat back or angle back type) size 630x450mm, including cutting for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe.
Fixing only in repair wash basins, vitreous China (flat back or angle back type) any size including cutting for and pinning inn ends of brackets or erecting stand but exculsive of fixing of supply and waste pipe.
S&F, 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.
S&F, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms)
S&F, 32mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm.
S & F vitreous china wash down water closet ( Pedestal pattern ), White including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device with PVC valveless syphonic action flusing cistern low level white with inlet ball valve, float and handle including brakets, flush pipe of polyethylene of low or high density PVC 32 mm dia.
S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with PVC valveless syphonic action flusing cistern low level white with inlet ball valve, float and handle including brakets, flush pipe of polyethylene of low or high density PVC 32 mm dia. Fixing in repair
S & F Vitreous China urinals white colour, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe.
S & F Vitreous china squatting plate urinal, white
S&F, Vitreous China bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repairs.
S&F, 32mm Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms)
S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F, 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair.
S&F flush pipe of polythylene of low or high density or PVC 32mm dia,for low level cisterens of squatt patteren closet including all joints and making good to the floor
S&F 15 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors.
S&F 20 mm medium grade G.I. steel tubes, with all fitting and fixed complete to walls and ceiling or laid in floors.
Taking up or down steel tubing 15 mm and connections, including cleaning for refixing or removal to store.
Refixing old steel tubing 15mm and connections in new or old position (Walls, ceiling, floors, etc.
Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store.
Refixing old steel tubing 20 mm and connections in new or old position (Walls, ceiling, floors, etc.
Cutting existing steel tubing 15 mm for alterations or additions.
Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector)
S&F 15 mm Stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
S & F 15 mm fancy type Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed.
S & F 15 mm, fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with shanks and fly-nuts, screwed for iron pipe and fixed.
S & F 15 mm Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms)
S & F, 15 mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)
S&F 15 mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms), screwed both ends for iron pipe & fixed.
S&F 15 mm dia PVC connections with PTMT nuts of length 450mm.
S&F 15 mm dia PVC connections with PTMT nuts of length 600mm.
Supply & fix in repairs, 110 mm bore PVC (SWR) pipes, single socketed , in any length with rubber ring joints, fixed to walls/ceiling & including necessary clanps of required size etc complete all as specified & directed.
Supply & fix in repairs, 75 mm bore PVC (SWR) pipes, single socketed , in any length with rubber ring joints, fixed to walls/ceiling & including necessary clanps of required size etc complete all as specified & directed.
S&F 110 mm dia PVC (SWR) soil, waste and vent pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S&F 110 mm dia PVC (SWR) junction single, ( single T), equal or unequal.
S&F 75 mm dia PVC (SWR) junction single, ( single T), equal or unequal.
S&F 110 mm dia PVC (SWR) bends any radius.
S&F 75 mm dia PVC (SWR) bends any radius.
S&F 110 mm dia PVC (SWR) vent cowl.
S&F, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
Removing building materials etc. to a distance of n exc. 1km, beyond the lead included in the rates, including loading, unloading and stacking at the destination.
B.D. TRADERS
R K SETHI
SHRI KRISHNA CONSTRUCTION
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .