IISER-K/IWD/Elect./ NDQ/20-21/06

Amount

Laying of one number 1.1 KV grade XLPE insulated insulated and PVC sheathed Armoured power cable of 3.5x 70 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5x 70 sqmm size in the existing METAL pipe as required.

Laying and fixing of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5x 70 sqmm size clampled on existing 6.0 M overhed Pole as required.

Supply and laying of 50 mm Medium B Class GI pipe of at all crossings viz road, pathway, drain, nallah & minor water crossings, etc. at designated depth by open excavation. Make: SAIL, Tata, Jindal, Electrosteel,Shyamsteel

Providing and laying cement concreteof Grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) for Backfilling of existing roads excavation complete with leveling, finishing etc. Cement: Ultratek, Birla, ACC, Ambuja

Supply of 1.1 KV grade XLPE insulated insulated and PVC sheathed Armoured power cable of 3.5x 70 sqmm as per IS- 7098 (Part-1) Make: Finolex, Polycab, Havells

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Comet, Dowells,Connectwell

3½ X 35 sq. mm

3½ X 70 sq. mm

3½ X 120 sq. mm

Termination of 3.5x 70 sqmm LT Cable in existing 6.0 Mtr. Overhed power distribution line with outdoor type Heat-shrinkable LT Cable end termination kit , PG Clamp, Pole Clamp, insulators, eye hook inatalled in necessary hardware fittings complete as required. Make: Raychem, 3M, Multipressing

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. Make-Reputed

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Make-Reputed

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Make: Reputed

Supply, installation testing and commissioning of Outdoor Double Door Kiosk type weather proof distribution feeder pillar box of sutable size with a tapered at top (for protection from rain water) and made out of not less than 2.0 mm thick for load bearing members & 1.6 mm thick for doors, compartmentalized,IP 65, epoxy powder coated treated in 7 tank process finish with following items, front and back both side openable, duly hinged doors with locking arrangement by providing both sides hold drafts and all hardware for fabrication of box. The cubical panel should be mounted with hardware on angle iron frame long legs duly primered and black painted. Frame be grouted with cement concrete 1:3:6 ratio and providing brick masonry along angle iron frame above ground level complete with connecting strips, Bakelite sheet, earth stud etc. cable entry from bottom suitable for 3.5Cx 120/70 Sqmm I/c & O/g respectively. The panel should comprise of as per following (Panel shall be fabricated in CPRI approved panel builder with approval of the Deptt.. Drawing of the feeder pillar shall be submitted for approval prior to fabrication) Make: As per approval of Engineer-in-charge of IISER-K INCOMER 200 A, 4P, 36 KA TM Release MCCB with rotary handle - 1 No. (Make: Havells, ABB, Siemens, L&T) 200 A, TPN Aluminum bus bar. OUTGOING (Make: Havells, ABB, Siemens, L&T) 200 A 4P 25 KA TM ReleaseMCCB rotary handle- 1 Nos. 100 A 4P 25 KA TM Release MCCB rotary handle- 2 Nos 63 A 4P 25 KA TM Release MCCB rotary handle- 1 Nos. Digitol multifunction meter- I set LED- RYB indicator lamps- 1 set CT-200/5A, Class-1, 15 VA - 3nos Control circuit MCB of adequate rating

Supplying and fixing of 200 Amps 4 way, 25 Ka,IP 31 Protection class,TPN(Stack layer one behind the other), Busbar Chamber System as per IEC-60439/IS-8623 board, 415 volts, powder painted Make: Havells/L&T/ABB/Siemens

Supplying and fixing following rating, four pole, 415 volts, 25 KA, MCCB,having staggering connection facilities in the existing Outdoor type Kiosk Structure complete with connections, testing andcommissioning etc. as required. (Make: Havells, ABB, Siemens, L&T)

Supplying and fixing of following rating, 150 WATT Metal Hallid(M/H) Lamp E-40 (thread Type) complete with connections, testing and commissioning etc. as required of Phillips make

MASTER HPI-T Plus 150 Watt lamp (Thread type), Make-Philips

150 watt copper ballast (4 Pin) Make-Philips

100-400 W Electronics Ignitor for SON(-T) (Plus), Make: Philips SN 58/02

Supply & fixing of 45-48 Watt Outdoor Street LED Light Fitting LED street light with pressure die-cast aluminium heat sink housing with toughened glass and individual LEDs with secondary optic with IP 66, CCT- min 5700K,CRI >70,PF>0.95,Surge Protection 4 KV, Luminaire efficiency:≥120 lm/W Make:- Phillips/Wipro/Magik/Bajaj inclusive onsite warranty for a period of 2 years from date of supply

BREEZE TUNE