Repair to floors, windows, toilets, kitchen, Doors and Electrical works

Amount

Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Demolition Concrete of any description and in any position not otherwise specifically provided for.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each .

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) exc. 1.5 sq. m but nexc 4.0sq.m each .

Taking down shutters of any description exc 1.0 sq.m but n exc 2 sq. m each.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde-E-250) quality -A

S&F, Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, 3 mm thick

S&F, Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples, Size of mesh 12 mm .

Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 100mm

Preparation of new surface or previously untreated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of red oxide, zinc chrome primer on steel and iron surface of any description, over 10 cm in width or girth, not otherwise described.

S &F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 30 mm thick, including Medium MS butt hinges 125 mm

Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm Length of bolt

Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm length of bolt

S&F Aluminium handles, cast type, anodised, size of handle 150mm

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L, rendering 15 mm thick 1:4 cement plaster for fair & other faces of brick work or concrete surfaces, fine finished even and smooth without using extra cement.

M & L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Glazed ceramic Coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm /450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, cement plaster 1:4

M & L 75mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

M & L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

Reinforced cement concrete (nominal mix) in :- Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like TypeB0 1:2:4 (12.5mm graded aggregate)

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips TMT bar.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for flat fair finished surfaces of concrete

S& F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and fluse pipe ) complete including provision of lime concrete bedding & fixing flush pipe, PVC (SWR) 'P’ trap. Make parryware/Hindware/Kerovit

S&F, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 litter , flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.Make parryware/Hindware/Kerovit

PVC connections 15mm size with PTMT nuts of length 450mm

S & F 110mm PVC (SWR) WC connector with lip ring

S&F, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , Bore in 110mm.

S&F, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , Bore in 75mm.

S & F 110mm PVC (SWR) bend any radius provided with access door

S & F 110mm PVC (SWR) bend any radius /floor trap/nahani trap including Jali Chromium plated

S & F PVC (SWR) vent cowl 75mm

Preparing old surfaces plastered or unplastered and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make:- Water proof paint Apex (Ultima) Asian/Dulux weathermax/Nerolac

Preparing old surfaces plastered or unplastered and applying two coat of oil emulsion on wall and ceiling, white or tinted make: Asian ( Tractor emulsion) /Nerolac/ICI Dulux.

3mm thick wall care putty on wall & ceiling make JK/BIRLA WHITE CARE/ASIAN/JK LAKHMI

Cutting holes in brick walls in cement mortar or cement lime mortar and stone walls buit in lime mortar, for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, exc half brick but n exc one brick of embeded portion of holdfasts or lugs.

Removing building materials etc. to a distance up to 500 metres or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. including: stainless steel butt hinges and necessary S.S screws .

S& F 30 MM thick plain WPC (Wood Polymer Composite) factory made wire mess solid door shutters (conforming as per IS-4020 ) density not less than 650 kg/cum manufactured by an ISO:9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safety purpose.Door shoud be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturers specification & drawing and as directed by Engr- in- charge ((Note: including necessary Wire netting of stainless steel wire, stainless steel butt hinges and necessary S.S screws) including Door Closer.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasterners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5 mm tolerance in dimension i.e depth and width of profile shall be accepted. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make Jaquar/Kerovit/Hindware

S & F Brass CP Wall mixer three in one for mixing hot & cold water including over head shower screwed down for iron pipe and fixed Make : Jaquar/Kerovit/Hindware

S & F Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed Make : Jaquar/Kerovit/Hindware

S & F Brass CP Angle- cock water screwed down for iron pipe and fixed Make : Jaquar/Kerovit/Hindware

S & F Bib taps, long /small body 15 mm bore dia of pipe cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated and fixed Make Jaquar/Kerovit/Hindware

S & F Soap dish, Brass CP , fixed to plugs with chromium plated brass screws.

S & F EWC Single (One peice ) Vitreous China wash down water closet pan (pedestal pattern), ref. modle-3027 make :-Jaquar/Kerovit/Hindware

S & F, Vitreous China wash basin, white, flat back, size 580x450 irun excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete in all respect Make:- Jaquar/Kerovit/Hindware

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. CPVC pipe outer dia 16 mm

M & L 14 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including molding on edges

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms )

Preparation of old painted surfaces of any description not otherwise described over 10 cm width or girth applying two coat synthetic enamel paint on wooden surfaces .

Credit (-) old/unserviceable dismentled steel window frames/grills

Credit (-) old/unserviceable dismentled Doors with door frames

M&L for one light point or one fan point concealed wiring with FRLS stranded copper conductor PVC sheathed Cables in PVC conduit. controlled by one switch with cables 1.5 sq. mm size. Make- Pipe- Kalinga / Anchor / Plaza only.Make-Wire-Finolex /Havells /RR only. (Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L cocealed wiring one three pin socket outlet 15 amps. Independent wiring with FRLS stranded copper conductor PVC sheathed Cables in PVC conduit with cables 4 sq. mm size. Make- Pipe- Kalinga / Polycab /Plaza only. Make Wire-Finolex /Havells / RR only. (Note: The rate include any length of wire required from DB to switch board and light point,Socket point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L for one 3 pin socket outlet 5 amps on the same board with other switches concealed wiring with FRLS stranded copper conductor PVC sheathed Cables in PVC conduit. controlled by one switch with cables 1.5 sq. mm size. Make- Pipe- Kalinga / Anchor / Plaza only.Make-Wire-Finolex /Havells /RR only. (Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L for one 3 pin socket outlet 5 amps independent concealed wiring with FRLS stranded copper conductor PVC sheathed Cables in PVC conduit. controlled by one switch with cables 1.5 sq. mm size. Make- Pipe- Kalinga / Anchor / Plaza only.Make-Wire-Finolex /Havells /RR only. (Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L for one bell or buzzer point on the same board with other switches or independent controlled by one push button concealed wiring with FRLS stranded copper conductor PVC sheathed Cables in PVC conduit. controlled by one switch with cables 1.5 sq. mm size. Make- Pipe- Kalinga / Anchor / Plaza only.Make-Wire-Finolex /Havells /RR only. (Note: The rate include any length of wire required from DB to switch board and light point , fan point with additional length reqd for connecting up to holder/ ceiling rose etc.)

M&L, Modular Bell Push 6A,1 Module

M&L, Bell multi music type

S&F wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable insurfase /recessed as required 2X6.0 sq.mm+1x6.0 sq.mm earth wire in PVC conduit. Make- Pipe- Kalinga / Polycab / Plaza only. Make Wire-Finolex /Polycab /RR only.

Modular Sockets, 6A - 2/3 pin combined 2 module.S&F Make:Anchor/Havells/Legrand

Modular switches 1 way 6A,1 module.M&LMake:Anchor/Havells/Legrand

Modular Sockets, 6A/16 A - 2/3 pin combined 2 module.S&FMake:Anchor/Havells/Legrand

Madular White cover plate with frame, 8 module. S&FMake:Anchor/Havells/Legrand

Madular White cover plate with frame, 2 module. S&FMake:Anchor/Havells/Legrand

Madular White cover plate with frame, 4 module. S&FMake:Anchor/Havells/Legrand

Modular metal Flush Box 8 module S&FMake:Anchor/Havells/Legrand

Modular metal Flush Box 2 module S&FMake:Anchor/Havells/Legrand

Modular metal Flush Box 4 module S&FMake:Anchor/Havells/Legrand

Modular switches 1 way 16A,1 module.M&LMake:Anchor/Havells/Legrand

Madular White cover plate with frame, 6 module. S&FMake:Anchor/Havells/Legrand

Madular White cover plate with frame, 3 module. S&FMake:Anchor/Havells/Legrand

Modular metal Flush Box 3 module S&FMake:Anchor/Havells/Legrand

Modular metal Flush Box 6 module S&FMake:Anchor/Havells/Legrand

Supply and fix electric water heaters(Geyser) ,storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre BEE 5 star rated complete with all accessories such as safety valve thermostate ,NRV ,connection piece etc.Make: Havells/Jaguar/Reckworld

Supply and fixing round shape 12 watt 220 Volt AC recessedtype/surface mount whichever is suitable with high efficiency PMMA diffuser soft glare free light complete with drivers holders &LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Fixing only LED light fittings 1x16 watt 220 V AC decorative box type with driver holder including LED tube light connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete

Cutting chases brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good cutting not exc 10 cm grith

S&F MODULAR FAN REGULATOR Fan step regulator, 120W - 2 module

Hanging only ceiling Fan connecting up including provision of cable from ceiling rose or connector to fan ( M.D.Supply )

Supply & Fixing exhaust fan steel body AC single phase 230 V of size 300 mm sweep with blades and frame nd louvers

M& L Ceiling rose 3 phase/PVC/polycarbonate,isolated body

M&L Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet ,10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make: Havells/Philips/Wipro

Supply & Fixing Isolator Double Pole 240 V 63 Amps

Supply and fixing amp rating 240 v 10 KA MCB of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning SP 6 to 32 AMP

Taking down copper/aluminium point wiring (light/Fan/Socket or power) complete including fixture ,fittings such as switches ,ceiling roses,pendents,regulators,sockets,light fitting etc,removing materials to store for keeping in safe custody and making good disturbed surfaces or walls ,floors etc.

Supply & Fixing SPN Double Door 240 V 12 way 200 amp rated bus bar Sheet metal enclosures for DBs when MCBs to be used.

Contractor credit to old material such as fixtures,DBs,MCBs,Switches,Sockets old wire etc. indicated at sr. No. 35

M/S RP AGRAWAL (BID ID -872860)

Ajab singh rana and Brothers (BID ID -872166)