PROVISION OF FALSE CEILING, ROOF TREATMENT AND UPGRADATION OF SMQS AND ADDN / ALTN OF CERTAIN BLDGS AT AF STN SAMANA

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soil complete all as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

Returning filling in hard/dense soil incl spreading, levelling, watering, and well ramming in layers complete all as specified and directed.

Removing excavated material of soils n. Exc 50 mtr and depositing where directed at a level n. Exc 1.50 m above the starting point complete all as specified and directed.

M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete

Excavation in post holes in soft / loose soil (or similar holes) each n.exc 0.5 cum, getting out, returning, refilling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil removing surplus soil to a distance n exc 50 m complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Demolition of brick / stone / PCC block masonry/cemented jaali built in cement mortar including all quoins, pillars, arches etc. including removal of debries to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position exc 15 cm thickness below or above ground level, including removal of debris to a distance exc 1.5 Km but n. exc 2 Km.

Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete, paving etc, complete all as specified and directed by Engr-in-Charge.

M&L for RCC nominal mix, Type B1, 1:2:4 grade, using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for PCC 1:3:6 type C 2 using 40mm graded stone aggregate as in foundation, filling, mass concrete complete.

M&L for 100 mm thick PCC 1:2:4, using 40 mm graded stone aggregate as in as in floor / path / hardstanding, and similar works, finish the surface fair & even all as specified and directed.

M&L for PCC 1:2:4 type B-1( using 20 mm graded stone aggregate) in coping etc including necessary form work complete all as specified.

Use & waste of Form work to sides and soffits of floor or roof beams,lintels cantilever etc for flat rough finished surface complete all as directed.

M & L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

M&L RCC M-30design mix (Using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.

M&L RCC M-30 design mix (Using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified and directed.

M&L RCC M-30 design mix (Using 20 mm graded stone aggregate) as in columns, pillars piers, posts and struts etc all as specified and directed.

Form work to flat sides rough finished surfaces of concrete for foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation, plinth beams; roof slab etc and similar work; vertical or to batter complete all as specified and directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for olumns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto- all as per srl item no 24 but 6 to 8 mm dia. Bar for stirrups

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes on forming to I. S.1161- 1979 grade St.-240 complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement.

M&L for rendering 10mm thick in CM 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and smooth without using extra cement all as specified and directed

M&L for plastering 10mm thick on concrete surface as roof padding in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately.

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and surface finished even and fair without using extra cement.

M&L for preparation of new plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, over one or more coat of wall care putty all specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash all as specified and as directed by Engineer-In-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise, applying two coats of synthetic enamel paint over a coat of red-oxide, complete all as specified.

M&L for preparation of new plastered surface of walls including plaster / cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer as per manufacturer's instruction complete. Makes - NEROLAC (Excel) / ASIAN 'APEX' / DULUX "WEATHER SHIELD WATER PROOF"

M&L for preparation of new wooden surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, over two coat of cement base wall care putty all as specified & directed.

M&L for two or more coat of melamine polish on new/old wooden surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed

M&L for preparation of plastered surface of ceiling and applying two coat of wall care putty with two coats of Distemper oil emulsion over one coat of primer, all as specified & directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete includig 15mm thick screed bed in CM 1:6, pointing in white cement with pigment to match the stone all as specified and directed.

S&F 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 15mm size angular cock, cast copper alloy, CP fancy type with capstan head, screwed down, screwed both end for iron pipes complete

S&F 15mm dia size Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) all as specified and directed.

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls including clamp complete all as specified and directed

S&F 500 ltrs capacity double layer, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified

S&F white vitreous china wash hand basin (Flat back) of size 580x450mm fixed on and including new brackets complete in, 32mm size brass chromium plated wastest coupling, 750mm long PVC waste pipe, PVC connection pipe, 15mm size and 450mm long with PTMT nuts and washer at both end etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing / cladding to wall, fixed with self tapping screws as specified and directed.

S & F 1.25 mm thick MS Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified and directed.

M&L for light shade colour vitrified ceramic tiles 8-10 mm thick (square/rectangular ) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for 10 mm thick for cemented seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction and applying two coat OBD over one or more coat of wall care putty.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete including taking down old shutters with frame all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560)

(c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B (ii) Door shutters shall be fixed over existing Floor door spring. (iii) Lock will be measured & paid separately.

S&F aluminium partition made with aluminium powder coated anodized Section - 63.50 X 38.00 X1.20 mm thick of jindal or equivalent in framed work fixed walls, floors incl provision for receiving glass aluminium beading rubber gasket complete all as specified.( Glass pane / Nova pan measured and paid separately ).

S&F 9mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work sides with decorative choice laminations lamination, fixed with screws to timber frame work

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832)

(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) (Make Jindal or equivalane)

S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete. Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.

S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed & repair complete all as specified & directed.

M&L for 1st class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specifed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sq. m each.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each.

Taking down Shutters of any description exc 1 sq.m but not exc 2 Sqm each and refixing the same after tiles work commenced as per directed by Engr-in-Charge and site requirement.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all around lipping with 6 mm beading all as specified and directed

S & F 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed

S&F in repair of mineral Fiber Acoustical suspended ceiling sheets with beveled regular edge tiles laid over existing grid system the tiles should have humidity resistance (RH) of 99% , NRC 0.5, Light reflectance > 87% , Thermal conductivity k=0.052-0.057 w/m K, colour white, fire performance UK class 0/Class 1 (BS 476 pt -6 &7) inmodule size of 600x600x12mm, suitable for green building applicatin, with recycled content of 30% complete all as specified Make : Armstrong or equivalent (Tile shall be model name classic Lite & Grid system shall be model Name suprafine XL 15 exposed) or equivalent

M&L for 10mm thick Planed one side & edges tongued and grooved or rebated, fixed with nails supplied fixed complete all as directed

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw, any sunk or raised moulding as per manufacturers instructions and applying two coat of OBD over two coat of wall care putty.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified

M&L for complete removal of existing treatment on roof including brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed

M&L for PCC in roof pading, filling and mass concrete type B1, 1:2;4 (using 20mm graded stone aggregate) complete all as specified and directed

M&L for 3mm thick prefabricated plastomeric water proofing membrane (Polyster rainforced) with spun bonded polyster mat as a core (APP membrane) (weight not less than 3 kg per sqm) laid over bituminous ccted surface of roof and applied with lpg torch and applying uniform pressure with a roller/wet cloth to ensure to remove entrapped air, if any all as per manufactureer instruction. The APP membrane shall be overlap of not less than 100mm and 150mm as 150mm as end lap and side lap respectively sas per manufacturer instruction. The over laping and joints will be thermosealed with the propane torch complete all as specified and as directed. Make:-PIDILITE INDUSTRIES LTD./ TIKI TAR DANSONA (INDIA) PVT LTD/SIKA INDIA PVT LTD/M/S TEXSA INDIA PVT LTD/TORCHTAR MEMBRANES & BITUMEN PRODUCTS PVT LTD/ASIAN PAINT SMARTCARE APP MEMBRANE/M/S AR Industries/M/S BENGAL BITUMEN

Supply only Liquid water proofing compound complete all as specified and directed. Make:-Fosroc/DR. Fixit or equivalent a approved by GE.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for coloure Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors over 15mm thick screed bed or bedding layer in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for coloure Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match rendering in CM 1:4 pointed neat cement slurry and pointed in white or colour cement to match all as per specified.

M&L for Green marble work 18 to 20mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match, incl 15 mm thick screed bed in cement mortar 1:6 complete.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC capping & casing not less than 25 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including PVC surface type terminal box of suitable size with PVC cover complete.

All as per item No 90 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch.

All as per item No 90 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

S&F Switch Piano type, white polycarbonate body, single pole, one way 6 amp, 230 V, including connecting complete.

S&F for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete.

S&F for Switch socket combination white polycarbonate body, 6A- 230 V, 2/3 pin combined, including connecting complete.

S&F for Switch socket combination white polycarbonate body, 6A / 16A- 230 V, Multipurpose, including connecting complete.

Supply and fix stepped type electronic fan regulator flush type, 230 V, including connecting complete.

S&F Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 6 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 240 volts, double door type,240 V fixed flush to wall complete all as specified and directed.

Supply and fix MCB’s single pole 6 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix MCB’s single pole & neutral, 40 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix Energy efficient recessed mounted LED luminaries 36 watt suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge .

Supply and fixing ceiling fans 1200 mm sweep 230 Vcomplete with blades, down rods and accessories.

S&F high speed air circulating fan 230 V,single phase oscillating 450 mm sweep, having 3 numbers blade , adjustable upward and dopwnward tilt mechanism, oscillating degree 60, having on/off switch, pull cord and rated speed of 1400 RPM, 100 watt, 50 HZ, 230 V along with mounting acessories complete.

Supply and fix Ventilating fan by making suitable hole on any type of wall for installing exhaust fan of capacity 300 mm sweep AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete. Make Havells Cat No. Ventil Air - DSP or equivalent of Make mention Appendix B.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

Supply and installation of heavy duty industrial cooler with ducting features having down discharge type whose cooling area 1400Sqft, Heavy galvanized steel body of thickness 0.8 mm and is powder coated from inside and outside, inbuilt float valve SP 230 Volts 50 Hz,1100 RPM Fan speed, 60 Ltrs tank capacity,5500 CFM air Displacement ,having 4 side honeycomb cooling pad complete all as specified and directed. Make: Ram Coolers Model no. Force 1400H or equivalent as approved by GE. NOTE:-Quoted rate include stand for fixing cooler to wall, L- shape duct and front grill

M&L for cutting existing pipe line of size 25 mm dia and making thread at both end.

S&F GI medium grade 20 mm size equal tee.

S&F 20 mm size gun metal gate valves ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete.

Supply and fix on wall or laid on floor 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends / elbow, tee, union etc complete and connecting to water supply pipe line complete all as specified and as directed by Engineer-in-Charge.

M & L for Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.complete all as specified.

Material and labour of earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanised earth lead wire 4 sqmm dia, watering pipe of 20 mm bore, galvanised iron, light grade, and 40 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Note:- Quoted rates shall be deem to include for earth strip/earth lead wire with protection pipe up to 7.5 M length.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire

Supply and fix metal body exhaust fan heavy duty 450 mm sweep, AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including connection complete all as directed by Engr-in-charge. Make:- havells/crompton/bajaj or equivalent of Make mention in Appx B

Supply and fixing Recessed mounted LED round panel light panel light of 16 watt,220 V AC,6500 K AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders,LED lamp suitale for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Havells/Bajaj/crompton or equivalent of Make mention in Appx B

Jagdamba Engineering

Sukhi Electricals

Pooja Enterprise

jitendra c joisar

M/s SK Traders