Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC | L1 | Accepted-AOC being L1 | |
| 2 | L2₹9.1 L+₹1,152.60 (0.13%)Rejected-AOC 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L2 | Rejected-AOC being L2 | |
| 3 | L3₹9.7 L+₹58,091.60 (6.37%)Rejected-AOC JANAKI NIVAS BEHIND CHOVVA TEMPLE CHOVVA PO KANNUR KERALA 670006 | KANNUR | KANNUR | KERALA | 670006 | L3 | Rejected-AOC being L3 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I Cannanore
AGE I Cannanore HQ Hospital Kannur PO 670017
Repairs to MP tile roofing, ceiling, joineries and certain civil works to certain buildings of Zone B area at Mily Station Kannur under AGE (I) Cannanore.
2023_MES_607186_1
8276
Open Tender
Civil Works
Item Rate
180 days
Cannanore
Category E a (i)
8 documents required · 8 mandatory
₹500
Yes
AGE I Cannanore
₹19,000
Yes
12 Sept 2023
30 Jun 2023
31 Jul 2023
1 Jul 2023
27 Jul 2023
14 Jul 2023
1 Jul 2023 - 7 Jul 2023
Amount
Dismantling single layer Mangalore pattern tiles in roofing all as specified and directed.
Dismantling of battens for tiles, shingles etc of any size including tilting fillets all as specified and directed.
Dismantling timber scantling 40 sqcm and over in section in any position unframed work all as specified and directed.
M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified and directed.
All as per item No 4 here in before but except tile all as specified and directed. Note : Serviceable tile obtained from item No 1 shall be reused.
M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) all as specified and directed.
All as per item No 6 here in before but except ridge tile all as specified and directed. Note : Serviceable ridge tile obtained from item No 1 shall be reused.
M&L for second class hard wood clean sawn batten of sectional area exc. 5 sqcm and not exc. 15 sqcm at exc. 30 cm and not exc. 35 cm centres all as specified and directed.
All as per item No 8 but except batten all as specified and directed. Note : Serviceable batten obtained from item No 2 shall be reused.
M&L for second class hard wood in scantlings clean sawn, unframed work, as in rafters, purlins etc. timber fixed all as specified and directed.
All as per item No 10 but except scantling all as specified and directed. Note : Serviceable scantling obtained from item No 3 shall be reused.
M&L for preparing surfaces of wood and wood based materials new of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed
M&L for steel work in tubular sections as in purlins etc including special shaped washer, etc, complete using ERW or induction butt welded tubes etc Fe 410W (Gde E-250) quality B all as specified and directed.
M&L for preparation of new or old untreated steel surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.
S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter/roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions as directed.
Dismantling wall and ceiling boards or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and directed.
S & F for anodized aluminium snap grid frame work as in clause No. 10.38 of MES Schedule Part I for false ceiling of size 605 mm x 605mm with supporting hanger comprising of 6 mm GI rod / GI flat 40x3mm, adjusting level with cleats, necessary washers, bolts and nuts for securing frame work to ceiling and to the snap grid complete all as specified and directed
M&L for rendering 10mm thick in cement mortar (1:6) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .
M&L for rendering 15mm thick in cement mortar (1:4) on stone masonry surfaces, finished even and smooth without using extra cement all as specified and directed .
M&L for preparation of new plastered wall surfaces and applying two coats of white wash all as specified and directed.
M&L for preparing surface of tiles battens, new of any size and spacing, and treated with two coats of creosote oil (measured overall on one side only spaces not deducted) all as specified and directed
Demolition of brick or stone or PCC block masonry built in cement or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land all as directed.
M&L for providing pre-cast cement concrete block masonry with solid blocks, exc.10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.
M&L for laterite stone masonry, regular coursed, well bonded and solidly hearted , built in CM (1:6) but except stone all as specified and directed. Note : Serviceable laterite stone obtained from item No 23 shall be reused.
M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and as directed.
S&F 4 mm thick non asbestos fiber cement building boards inserted to aluminium grid as per manufacturers instructions as in ceilings flat or sloping complete all as specified and directed.
M&L for preparation of new non AC ceiling board surfaces and applying two coats of oil bound distemper over a coat of chalk whitening all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treating with tar or coal tar black paint, area tarred. exc. 0.5 sqm each all as specified and directed
M&L for MS flat iron 50x6mm as in wind ties including necessary drilling, fixing arrangements etc complete all as specified and directed by Engineer in charge.
Dismantling of floor, hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles and rubbish off the premises all as directed.
Demolition of cement concrete (un-reinforced) above ground floors exceeding 15cm thickness and removing debris outside MD land all as directed.
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and directed.
M&L for coloured non-skid ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) all as specified and directed.
M&L for coloured glazed ceramic tiles 300x200x7mm thick, as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured / white cement to match laid over and including 10 mm thick backing on stone/brick masonry surfaces in cement mortar (1:3) all as specified and directed.
Taking down chowkats with shutters n exc. 1.5 Sqm each (without taking off shutters from the frame) all as directed.
Taking down chowkats with shutters exc. 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as directed.
Taking down wooden door shutters of any description n exc 1 Sqm each all as directed.
Taking down wooden door shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each all as directed.
M&L for second class hardwood, plain, solid straight chowkats & frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.
All as per item No 40 here in before but for with transoms and mullions, with double rebated on the solid frame for fixing double shutters all as specified and directed.
S&F 4mm thick plain sheet glass, ordinary quality and glazing with beads fixed with metal pins in squares not exc 0.50 Sqm in each pane all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
M&L for second class hardwood panelled shutter 30mm thick (three panels) with lock rail and panel of 9mm BWP, commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc; (with out sash bars), edges of framing, fitted with cut and mitered beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (b) all as specified and directed.
All as per item No 46 here in before but devided into squares with sash bars all as specified and directed.
M&L solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified and directed.
S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings and all as directed.
S&F stainless steel butt hinges medium weight; 100mm size all as specified.
S&F stainless steel butt hinges medium weight; 75mm size all as specified.
S&F 100mm long aluminum anodized barrel tower bolts of extruded section all as specified.
S&F 150mm long aluminum anodized barrel tower bolts of extruded section all as specified.
S&F extruded aluminum alloy anodized handle fabricated type 100mm size all as specified.
S&F extruded aluminum alloy anodized handle fabricated type 150mm size all as specified.
S&F aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed
S&F in repairs aluminium anodised sliding door bolts 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed
M&L for mild steel flat iron of size 25 x 3mm for holdfasts for securing new wooden frames and similar articles conforming to Fe-290 Gde-E-165 all as specified and directed.
M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate for fixing hold fast including necessary form works all as specified and directed.
Taking up or down steel tubing and connections including cleaning for removing to store of sizes upto 20mm bore all as directed.
S&F for 15 mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.
S&F for 20 mm bore UPVC pipes of pressure rating 10 kgf / cm2, fixed complete to walls, ceilings etc. all as specified and directed.
S&F in repairs bib tap 15mm dia, chromium plated, fancy type, cast copper alloy, screwed down, screwed for iron pipe or ferrule and complete all as directed.
S&F in repairs stop cock 15mm bore cast copper alloy, chromium plated, fancy type, screwed both ends for iron pipe or for unions and screwed down, high pressure with long shank & cup complete all as specified and directed
S&F in repairs 15mm pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated , screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed.
S&F Vitreous China Wash down water closet pan (Pedestal pattern) white, (excluding flushing cistern and flush type) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device as fixed in repairs all as specified and directed.
S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 Litre capacity, white, with inlet, ball valve, float and handle including low or high density PVC flush pipe all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 15mm bore dia all as specified and directed.
S&F in repairs health faucet (ABS body), mild steel chromium plated jet spray including LDPE flexible cable with jet of 100 mm long fixing to 15 mm dia pipe all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 20mm bore dia all as specified and directed.
S&F CP soap dish holder any type fixed to wooden plugs with chromium plated brass screws all as specified and directed.
S&F in repairs tubular towel rail brass, chromium plated, D type, 60cm long between flanges fixed to wall with wooden plugs with chromium plated brass screws all as specified and directed.
S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.
S&F Doctor fixit pidifin 2k high performance 2 component flexible providing and laying water proofing treatment to sunken portion of WC,bathroom etc by applying cement slurry mixed with two components elasomeric acrylic based polymer modified cementitious composited compound coating of make Dr Fixit, pidilite or equivalant as follows :- (a) Applying Ist layer of cement @ 0.488 kg/sqm mixed with acrylic based polymer modified cementitious composited compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @0.242 kg/sqm mixed with acrylic based polymer modified cementitious composited compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours (c) Providing 20mm thick cement screed 1:4 mixed with water proofing liquid as per manufacturer instructions complete all as specified and directed. Note : Cost of Water proofing liquid should be included in the rate.
S&F grating square 100mm size of PTMT complete all as specified and as directed.
Dismantling and breaking up drain pipes 75/100mm bore (cast iron) set in cement mortar any dia of pipes and removing debris outside MD land all as directed.
M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with rubber ring joints laid in trenches or in floors all as specified and directed.
M&L PVC (SWR) pipe type 'B' 75mm bore single socketed with rubber ring joints fixed to wall all as specified and directed.
M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with rubber ring joints laid in trenches or in floors all as specified and directed.
M&L PVC (SWR) pipe type 'B' 110mm bore single socketed with rubber ring joints fixed to wall all as specified and directed.
S&F 75 mm bore, PVC (SWR) bends with access door all as specified and directed
S&F 110 mm bore, PVC (SWR) bends with acess door all as specified and directed
M&L for 75mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.
S&F in repair Vitreous China Wash basin, white, flat back, size 630 x 450 mm, including CI brackets, (but excl. pillar tap) cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 25mm bore dia all as specified and directed.
S&F ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 25mm bore dia all as specified and directed.
S&F 1000 litres capacity rotational moulded polthylene water storage tanks (cylindrical vertical with closed top) of make Sintex/Polycon/Plasto hoisted and fixed in position fitted with 20mm dia PTMT float valve with polyethylene float ball including taking down unserviceable water tank all as specified in SSR Part I,2009 and directed.
M&L Renewing tiles in patches, area n exc 5 sq.m including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete
Providing and applying water proofing to vertical and horizontal surface of depressed portions of WC, Kitchen and the like consisting of applying cement slurry @ 4.4 Kg/Sqm mixed with water proofing compound conforming to IS 2645 as per manufacturers instructions including rounded off junction/corners of vertical and horizontal surface with 20mm thick cement plaster 1:3 mixed with water proofing compound etc complete all as specified and directed. Note : Cost of water proofing compound shall be included in the quated rate.
VIJAY ENTERPRISES
T.P.SUNIL KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .