Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 172029 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance A R AND M O ON VARIOUS ROAD IN SECTION NALAGARH 1 UNDER NALAGARH SUB DIVISION SH HIRING OF JCB | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹15.7 L
EMD Value
₹31,500
Closing Date
25 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Temple Trust Shri Naina Devi Ji, District Bilaspur
Temple Trust Shri Naina Devi Ji, District Bilaspur, (HP)
Construction of arrival hall comprising medical post, biometric office, Police control room and resting place cum waiting hall at hall at bus stand at second floor of multi purpose complex belonging to Temple Trust Sh. Naina Devi Ji, Distt. Bilaspur.
2023_NDTT_77556_3
TTND-(MA)17(28)-23-4518-29 Dt 7.8.23
Open Tender
Civil Works
Item Rate
180 days
Bilaspur
Refer in SBD
10 documents required · 10 mandatory
₹500
Temple Trust Shri Naina Devi Ji, District Bilaspur
₹31,500
29 Aug 2023
18 Aug 2023
28 Aug 2023
18 Aug 2023
25 Aug 2023
18 Aug 2023
Amount
Brick work using common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level upto floor V in all shapes and sizes in within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) cement mortar 1:6 ( 1 cement : 6 sand ) 2nd Class bricks
Half brick masonry in common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level up to floor V level within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge. (a) Cement mortar 1: 4 ( 1 cement : 4 sand) .2nd Class bricks
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike?plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile C fixing with adjustable lugs with split end tail to each jamb ,within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .
6 mm cement plaster of mix within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . 1:3 (1 cement : 3 fine sand)
15 mm cement plaster on rough side of single or half brick wall of mix within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .(a) 1:6 ( 1 cement : 6 coarse sand)
P/F panelled glazed or panelled shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, i/c ISI marked MS pressed butt hinges bright finished of required size with necessary screws. within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) Kiln seasoned chemically treated hollock wood (i) 35 mm thick.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a)Kiln seasoned and chemically treated hollock wood (i)35 mm thick
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge. (a) Fixed to openings /wooden frames with rawlplugs screws etc
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 250x16 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 100x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 100 mm
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. completewithin all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 200 mm weighing not less than 120 gms
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 25 mm thick
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.(a) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge. (Asian Paints).
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade; - New work (two or more coats) over and including water thinnable priming coat with cement primer within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (Asian Paints).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) Two or more coats on new work over and under coat of suitable shade with ordinarypaint of approved brand and manufacture.(Asian Paints)
Finishing walls with water proofing cement paint of required shade within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . New work (Two or more coats applied @ 3.84 kg/10 sqm)(Asian Paints)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 1:1.5:3 (1 cement : 1.5 coarse sand) : 3graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form forwithin all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) Lintels, beams, plinth beams, girders,bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge. (ISI Make)
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . ( a) .steel 80x0.90 mm M.S. laths with 0.90 mm thick work in single section, fixed with or top cover.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 4 mm thick glass pane (weight not less than10 kg per sqm)
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) W.C. pan with ISI marked white solid plastic seat and lid (Hindware/Cera ISI)
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer(Hindware/Cera ISI)
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings,within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge(Hindware/Cera ISI) .
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .( Atul, Modi Gurd)
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 100 mm inlet and 75 mm outlet (i) Sand cast iron S&S as per IS - 398
Providing and fixing soil, waste and vent pipes within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 100 mm dia (i) Sand cast iron S&S pipe as per IS: 1729
Providing and fixing soil, waste and vent pipes within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge (a) 75 mm diameter : (i) Sand cast iron S&S pipe as per IS: 1729
Providing and fixing plain bend of required degree within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 100 mm dia (i) Sand cast iron S&S as per IS - 1729
Providing and fixing plain bend of required degreewithin all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 75 mm dia (i) Sand cast iron S&S as per IS - 1729
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge .(a) 15 mm dia nominal bore(Jindal B Class Hissar Make)
(b) 20 mm dia nominal bore (Jindal B Class Hissar Make)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge. (Sintax Make ISI)
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 15 mm nominal bore(ISI Make)
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 within all lead & lifts ,complete in all respect as per the direction of Engineer-in-charge . (a) 15mm nominal bore.(ISI Make)
Shyama Nand Patel
Pradeep Kumar
Krishna Nand Govt Contractor
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .