PROPOSED CONSTRUCTION OF LIBRARY BUILDING AT SUTHARPADA,TA:KAPARADA,DIST.VALSAD

BILL OF QUANTITIES

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

1 useful materials and disposing off the excavated stuff upto 50 Meter lead. (A) Loose 136.50 CMT. 117.07

Excavation for foundation upto 1.5 m to 3.0 m depth including sorting out and

2 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 83.00 CMT. 129.80

lead. (A) Loose or soft soil

Filling available excavated earth (Including rock in trenches plinth, sides of foundations

3 etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by 182.50 CMT. 130.39

ramming and watering)

Providing & filling in plinth with murrum or yellow soil or selected soil in layers of

cm. Thickness. Incl. watering, ramming & consolidation etc. complete.

Filling in plinth with sand under floors including watering ramming, consolidating

and dressing complete

Providing and laying cement concrete 1:2:4 (1-Cement : 2- coarse sand : 4- hand

6 Machine crushed stone aggregates 40 mmnominal size) and curing complete including 30.00 CMT. 3855.17

cost of formwork in (A) PCC

Providing and laying controlled cement concrete M.250 and curing complete inculding

7 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 23.00 CMT. 4419.76

work in foundation, footings base of column and mass concrete. (A) Footing

Providing and laying controlled cement concrete M.250 and curing complete inculding

8 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 4.50 CMT. 7963.85

work in All Types of Column D) Column, Pillers, posts and struts , upto Plinth

Providing and laying controlled cement concrete M.200 and curing complete inculding

9 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 5.00 CMT. 7927.49

work in All Types of Column D) Column, Pillers, posts and struts, upto Ground Floor

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Providing and laying controlled cement concrete M.200 and curing complete inculding

10 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 1.00 CMT. 7967.58

work in All Types of Column D) Column, Pillers, posts and struts, upto First Floor

Providing and laying controlled cement concrete M.250 and curing complete inculding

11 the cost of formwork but Excluding the cost of the cost of reinforcement for reinforced 8.50 CMT. 6265.03

concrete work in Beams. (E) Beam, upto Plinth

Providing and laying controlled cement concrete M.200 and curing complete inculding

12 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 8.50 CMT. 6269.77

work in All Types of Beams,(E) Beam, Ground Floor

Providing and laying controlled cement concrete M.200 and curing complete inculding

13 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 19.50 CMT. 6229.68

work in All Types of Slab,All Thickness (C) Slab upto Plinth and Ground Floor

Providing and laying controlled cement concrete M.200 and curing complete inculding

14 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 1.00 CMT. 5795.38

work in Lintel upto Ground Floor

Providing and laying controlled cement concrete M.200 and curing complete inculding

15 the cost of formwork but Excluding the cost of reinforcement for reinforced concrete 3.00 CMT. 5618.63

work in Chajja. Upto Ground Floor

Providing and fixing TMT bars Fe-500D steel reinforcement for R.C.C. work including

16 binding, bending and placing in position complete upto floor two level ,Ground Floor, 7853.00 Kg . 76.24

First Floor , Second Floor, Third Floor, Terrace Floor (all floor).

Brick work using common brunt clay building bricks having crushing strength not less

17 than 35 kg/sqcm. in foundation and plinth in cement mortar 1:6 (1 cement :6 fine sand) 10.00 CMT. 4021.02

etc.comp. (B) Conventional Ground floor upto Plinth

Brick work using common brunt clay building bricks having crushing strength not less

18 than 35 kg/sqcm. in superstructure above plinth level upto floor two level in cement 35.00 CMT. 4295.99

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional Ground Floor

Brick work using common brunt clay building bricks having crushing strength not less

19 than 35 kg/sqcm. in superstructure above plinth level upto floor two level in cement 7.00 CMT. 4336.18

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional First Floor

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Half brick masonry in common brunt clay building bricks having crushing strength not

20 less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in (B) 12.00 SMT. 653.00

Conventional Ground Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

21 Full/half brick walls for interior plastering upto floor two level and finished even and 212.50 SMT. 153.19

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

22 Full/half brick walls for interior plastering upto floor two level and finished even and 30.50 SMT. 176.58

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) First Floor

Providing & laying10 mm. thick cement plaster in single coat on fair side of ceilings

23 for interior plastering upto floor two level and finishing with smooth mala plaster.(i) 129.00 SMT. 140.94

Cement mortar 1:4 (1 cement : 4 sand) Ground Floor

20mm thick sand faced cement plaster on walls upto height 10 metres above ground

24 level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 195.50 SMT. 300.65

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Upto Ground Floor

Providing throating or plaster drip and moulding to R.C.C. Chhajja.

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all

Providing and laying polished Granite Slab 18mm thick in Flooring laid 20mm thick

27 Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) and jointed with Grey Cement Slurry 7.50 SMT. 2377.54

including full molded round front edges , rubbing and polishing etc. complete.

Providing and laying polished Granite Slab 18mm thick in Risers of steps Dedo,

window sill, jembs and pillars laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry including full molded round edges

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

29 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 109.50 SMT. 1073.12

sand ) finishing with flush pointing in white cement.Soluble Salt PVT. Tiles in All

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on

30 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white 49.50 SMT. 1073.90

Providing and fixing 37 mm thick flush door both sides laminated andshutter fabricated

from 35 mm thick solid core malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having

extra reinforcement on sides & edges in polish finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ alongwith embedded

32 wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & 3.36 SMT. 2615.04

shutter is to be water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium

S.S fixtures & fastenings & fastener sleeve.

33 Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical SMT. 1713.69

member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size 63mm x

34 38.10mm x 1.2mm (Wt. 0.643 Kg/mt) with colour anodized alluminium frame for 3.00 SMT. 1175.55

ventilation with 5 mm thick frosted glass as details etc complete for Ventilation

Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at

35 required spacing and frame alround square or round headed bolts and nuts or by 119.10 Kg. 111.60

screws.including applying a priming coat of red lead paint and two coats of oil painting

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Applying two coats of Birla (white cement based) or (acrylic lapy- putty) or equivalent

& two coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar dropping and

36 other foreign matter and sand papered smooth. with Wall painting (three coats) with 193.93 SMT. 161.45

plastic emulsion paint of approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Applying two coats of Birla (white cement based) or (acrylic lapy- putty) or equivalent

& two coats of primer of approved brand and manufacture on new Ceiling surface to

give an even shade including thoroughly brushing the surface free from mortar dropping

37 and other foreign matter and sand papered smooth. Ceiling painting (three coats) with 129.00 SMT. 166.87

plastic emulsion paint of approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete. Priming: Apply a liberal

38 coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is 195.50 SMT. 160.59

not recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed

39 priming paint brushing red lead. and Painting two coats (excluding priming coat) on 3.00 SMT. 122.49

new steel and other metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Steel work welded in built up sections, framed work including cutting, hoisting, fixing

in position and applying a priming coat of red lead paint :-

40 0.99 Quintal 9047.86

(A) In beams and joints channels angles, column, tees, flats with connecting plates or

angle cleats as in

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting a slurry coat of neat

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

42 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope 129.00 SMT. 747.28

and to be tempered to bring mortar creme out upto surface using

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P

or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour, Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle

43 unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm 2 No 4248.45

dia.porcelain enamelled flush bend including cutting holes in walls and making good

the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In white colour, Providing and

fixing plastic seat and cover for wash down water closer with C.P. brass hinges and

rubber buffers. (B) Black plastic seal and cover, With Jet spray heavy duty with S.S.

Braided hose 60 cm long.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets

44 painted white including sutting holes and making good the Providing and fixing C.P. 2 No 2384.71

brass waste for washbasin or sink. (A) 32mmdia.,Providing and fixing pillar tap,

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

45 jali of the following nominal diameter of self cleansing design with C.I scread down or 4 No 571.08

hinged grating including the cost of cutting and making good the walls.

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib

46 tap polished bright. (i) 15mm dia. 3 No 186.82

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

47 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 2 No 833.73

screws and washers.

48 Providing and fixing Gun metal check or non-return fullway wheel valve. 25mm. dia. 2 No 420.63

Providing and fixing chromium plated brass half turn flush cock of approved quality

49 including fixing in pipe line etc. complete.(ii) 25mm dia. 2 No 263.77

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (A)

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

51 on the wall with the help of clamp at every two metre C/C or shall be concealed as 6.00 RMT. 72.64

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

52 on the wall with the help of clamp at every two metre C/C or shall be concealed as 32.00 RMT. 91.83

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

53 on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm 19.00 RMT. 836.73

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

54 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) 2 No 1246.91

Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including

55 500mm x 450mm C.I. horizontal grating wih frame complete. 2 No. 2017.19

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

57 pressure pipes I.S. class NP2 of the following internal diameter with collars and butt 5.00 RMT. 248.67

ends prepared for collar joints including testing of joints complete. (B) 150 mm d

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

58 pressure pipes I.S. class NP2 of the following internal diameter with collars and butt 10.00 RMT. 665.47

ends prepared for collar joints including testing of joints complete.(D) 300 mm di

59 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 2.00 No. 101.90

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

60 Providing and fixing in position cowel went to pipes.(C) 100mm dia 1.00 No. 501.86

Providing erecting and fixing double coated PVC. (ISI) water tank of required

61 capacity each with all necessary fittings and connection etc. complete on terrace. 1000.00 Lit 3.94

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen in figures And words) of the

estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 22,74,238.83 Estimated Amount Put to tender.

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer, Executive Engineer

Panchayat ( R&B) Sub Division, Panchayat ( R&B) Division

Dharmpur Valsad