S.R. to 270 Commonpool Staff Qtrs (Block - V-1, X-1, U-1, W-1) Dist. Bharuch (Repairs to Plaster Work, Plumbing Work, Door & Colour Work).

Name of work : S.R. to 270 Commonpool Staff Qtrs (Block - V-1, X-1, U-1, W-1) Dist.

Bharuch (Repairs to Plaster Work, Plumbing Work, Door & Colour Work).

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

1 Dismentaling tiled of stone floors laid in mortar including 28.00 Sqm 46.77

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.

2 Dismentling doors, windows, ventilators etc. (wood or steel 24.00 Each 244.98

shutters including chowkhats architraves, holdfasts and

other attachment etc. complete and stacking them within

all lead and Iift.(i) Not exceeding 3 Sq.M. in area.

3 Removing and scraping of old deteriorated plaster of any 175.00 Sqm 18.94

thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from

site of work with all lead and lift.

4 Providing laying and jointing in true line and level 25mm 48.00 Rmt 91.84

dia. U.P.V.C. Pipe { SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

5 Providing 15mm thick cement plaster in single coat on 175.00 Sqm 212.52

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (l-cement:3-sand).

6 Providing and fixing window having extruded aluminum 21.00 Sqm 1583.95

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm (of jindal section no:2459 @ wt. of

kg/mt), horizontal Three track member size 92mm x

31.75mm x I.30mm ( of jindal Section no :8688 @ wt

Kg/mt) vertical member of size 92mm x 31.75mm x 1.50 (

of jindal Section no : 8933 @ wt.l.06.Kg/mt) with sliding

shutters of size 40mm x 18mm x 1.29 mm (of jindal

Section no : 8947 @ wt.of 0.456 Kg/mt) vertical member of

size 40mm x 18mm x 1.29mm (of jindal Section no :

@ wt of 0456 Kg/mt/with 5 mm thick transperent bronze

colour tinted float glass with S.S Jali in One member

powder coated aluminum fitting and fixtures and

transparent silicon sealant glass fixing to frame as per

7 Applying two coats of Birla or Asian acrylic lapy ( putty) & 749.00 Sqm 40.59

two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

8 Wall painting (two coats) with plastic emulsion paint of 749.00 Sqm 78.90

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

9 Distempering (Two coats) with oil bound distemper of 749.00 Sqm 79.86

approved brand and manufacture and of required shade

on wall surfaces to give an even shade, over and including

a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free

from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered

smooth. Extra over Item 44,45 for distempering with oil

bound washable distemper on celling and sloping roofs.

10 Painting two coats (excluding priming coat) on new steel 21.00 Sqm 65.31

grill and other metal surface with synthetic enamel paint,

brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

11 Providing and fixing cupboard shutters using 19 mm thick ply 24.00 Sqm 3129.99

wood and fixing on 1.00 mm thick decorative lamination sheet

20mm x 6 mm T.wood facing batten and T.wood frame having

a size 7 cm x 4 cm using necessary S.S. fixture & fastening,

nsils, Fevicol, ball catch, magnet & innerside of cupboard oil

painting two coats with primer coat etc. complete as per given

detail drawing.

12 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 95.00 Sqm 916.27

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finished with flush pointing & cleaning the surface etc.

complete for light shade.

13 Providing and laying Ceramic tiles (plain or designed) of 14.00 Sqm 995.81

approved size 6 mm. thick in skirting risers of steps and

dado on 10 mm. Thick cement plaster 1:3 (1 cement:

coarse sand) finishing with flush pointing in white

cement slurry (B) Ceramic tiles 6mm to 8mm.

14 Providing and fixing pillar tap. capstan head, screw down 48.00 Each 308.73

high pressure with screws, shanks and back nuts (i) 15mm

15 Providing and fixing screw down bib taps of following 32.00 Each 186.83

size.(A) Brass screw down bib tap polished bright (i) 15mm

16 Providing and fixing chromium plated brass half turn flush 32.00 Each 263.77

cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

17 Providing laying and jointing in true line and level 15mm 140.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings make as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent,

including cost of all materials.

18 Repairing, Providing and fixing 35 mm thick shutters for 6.00 Sqm 5338.30

Doors, windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc,

complete (ii) Fully Panelled.

i.e. Rs. Four Lakh eighty three thousand five hundred ninety six and paise thirty only.

I/We am/are willing to carry out the work @ ______________ % above/below percent

(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

5. 1% testing charges should be paid by the contractor.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

City (R & B) Sub Division Bharuch (R & B) Division Bharuch (R & B) Division,

Bharuch Bharuch Bharuch

It. Item of Work Qty. Unit Rate in Total

No. Figures Amount

Bharuch Bharuch Bharuch