Improvement of WS SI and SD to Schools and Anganwadi in different wards of Malkangiri Municipality under State Plan for the year 2025-26

(Part-A) Civil and PH Items

Supplying all materials,labour and T&P for constructing Toilet with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification.

9 nos Toilet for AWC Size (1.20m x 1.80) - Supplying all materials,labour,T&P for Earth work in all kinds of soil within 50m initial lead And 1.5m initial lift including rough dressing and Breaking clods to maximum 5cm to 7cm and laying in Layers not exceeding 0.3m in depth and as per Direction of the Engineer in charge.

Supplying all materials,labour,T&P forFilling in foundation and plinth with sand watered and Rammed.

Supplying all materials,labour,T&P for Cement concrete(1:3:6) with 4cm size hard granite metal.

Supplying all materials,labour,T&P forCement concrete (1:1½:3) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge.

Random rubble stone masonry in cement mortar (1:6) in foundation and plinth .

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour,T&P forBrick masonry work using(23 x 11 x 8cm) size C.B brick in cement mortar(1:6) in superstructure

Supplying all materials, Labour T&P for 12mm thick C.P.in C.M(1:3) as per P.H.Secification etc.

Fixing tiles (glazed tile) in dados skirting and risers of steps on 12mm. thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete

Fixing tiles (glazed tile) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete

Finishing walls with water proofing cement of approved shade on new work two coats to give an even shade including cost of brushes and putty.

Distempering two coats with any approved shade.

Fabricating supplying and fixing iron shutter with iron chaukahat made out of 35mm x 35mm x 5mm M.S.angle 25mm x 6mm M.S flat and 18gauge M.S. sheet fitted with aldrop, door handle tower bolt etc. complete

Supplying all materials,labour and T&P for constructing septic tank with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. 10 users'Septic Tank size [2.0x0.9x1.80mtr.]

Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete.

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x2.55mtr. Deep soak-way pit with dry brick walling up to 2.10mtr. height and bbrick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing

Dismantling and removing old tiled flooring including removing the bese coarse and stacking the usefull materials for reuse and removing the debries within 50mtr lead.

Fixing tiles (marble) in floors,treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete.

Supplying all materials, labour, T&P for fixing tiles in dados skirting and risers of steps on 12mm thicks cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour and T&P for fixing water closet (I.W.C. or Orissa pan) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips [Excluding foot rest for I.W.C. and trap] all complete as per specification

Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with fitting such as siphonic arrangement,15mm. nominal size PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification.

Supplying all materials,labour and T&P for fixing 100mmdia "P" trap for water closet including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification

Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification (40" x 20" x 18") of Parryware make

Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification

Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings

Supplying all labour and T&P for fixing of C.P.fitting fixture of the following size as per specification all complete

15mm dia C.P Angular Cock with stop cock (Make - Jaguar/ Cera/ Plaza)

15mm. dia.C.P. Long body Bib cock (Make - Jaguar/ Cera/ Plaza)

15mm. dia.C.P. Pillar cock (Make - Jaguar/ Cera/ Plaza)

15mm. dia.C.P. Short body Bib cock (Make - Jaguar/ Cera/

Plaza)

15mm dia PVC Connection Pipe (Make - Jaguar/ Cera/ Plaza)

32mm dia PVC waste Pipe (Make - Jaguar/ Cera/ Plaza)

Supplying all materials,labour,T&P and laying to leave and slope and jointing with sulvent cement for PVC pipes including bad concrete and (1:4:8) and humps over top the pipe (1:2:4) as per specification all complete

(a) 110mm dia PVC Pipe (4kg)

Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete

25mm dia PVC Pipe

15mm dia PVC Pipe

Supplying all labour and T&P for fixing of 110mm dia PVC Nani Trp with jalil fitting fixture of the following size as per specification all complete

110mm dia P.V.C. Nahani Trap with out Jally

110 mm dia P.V.C. SWR Vent Cowl

110mm dia PVC SWR Door cap

110mm dia P.V.C. SWR H/R bend

Supplying all materials,labour and T&P for 1000ltr PVC Tank with construction of staging for O.H.service tank(PVC) on the existing roof of the building as per drawing, specification and direction of Engineer-in-charge etc all complete

25mm dia UPVC Ball valve (Make - Jaguar/ Cera/ Plaza)

1000Ltr stagging work

Supplying all materials, Labour, T&P for providing house connection to different community toilet from PH Department CI/DI pipe line to inside his campus including earth work for laying of service pipe 0.45m depth, refilling thr trenches after complete work, carriage of excess excavated materials from road side to 5km by mechanical transport, fixing 1/8" dia ferrule in the CI/DI pipe line , Cutting hole in the brick/stone/RCC masonary wall, repair the broken wall hole cutting by road with CC(1:2:4), cost of fitting, fitting, 1 no. of PVC tap of approved make etc. all complete as per technical & P.H Specification and direction of Engineer-in-Charge.

Supplying all materials,labour and T&P for Construction of 1000ltr RCC Tank etc specification and direction of Engineer-in-charge etc all complete

(Part-B) Sinking of 125x100mm dia Bore well - 2nos

Labour for drilling a perfectly vertical bore hole of specified dia & specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs as required to suit the site condition including supply of rigs with its accessories T&P and consumables etc for lowering 200mm dia PVC/G.I pipes for housing fitted with socket and with or with out well screens as per the necessity for the soft medium and hard formation (PVC/G.I) pipe casing if required to prevent 125mm dia casing pipe and collapses of the over burden to be provided by the contractor including lowering and with drawing after completion of the tube well.

Lowering the following size G.I/PVC pipes with or without slotted pipes as per the necessity from ground level upto 30.00Mtrs depth and fitted and fixed upon perfectly vertical position including Lowering the following size G.I/PVC pipes with or without slotted pipes as per the necessity from ground level upto 30.00Mtrs depth and fitted and fixed upon perfectly vertical position including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials T&P etc complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above

(a) 125mm dia PVC.Casing Pipe

Supplying all materials T &P Lowering the casing pipe for protection of 125mm dia casing pipe etc as per direction of EIC. 150mm dia PVC Pipe CASING PIPES (IS:12818:2010) (Sch-80)

Cleaning and developing the tube wells with their own compressor continuously discharge is obtained from the tube wells including supply and use of all necessary equipments and labour as per the direction of EIC.

Supplying all materials, labour and T&P for fitting and fixing of 1.0HP Submerisble pump set etc all complete as per specification all complete

Supplying all labour materials, T&P for fitting and fixing of suitable control pannel of pump set 1HP

Supplying all labour materials, T&P for fitting and fixing 2.5mmsqr 3 Core Submersible Flat Cable for 5HP Submersible Pump etc. complete as per the direction of EIC.

Supplying and fixing of following nominal dia HDPE Pipe for suction pipe.

(a) 25mm dia HDPE Pipe

(a) 25mm dia PVC Pipe

Supplying and fixing of supporting wire

Supplying and fixing of Bore Cap

Supplying and fixing of Electrification

(Part-C) Pump motor

1000Ltr PVC tank (Make- Sintex/ Plasto)

Supplying all materials, labour and T&P for fitting and fixing of 1.00HP Vertical Multistate Submerisble pump set etc all complete as per specification all complete (1.1Kw, Pipe size 32mm x 32mm, Head in Meters 87-42, Discharges in LPM 1.0-3.5) - 1HP, 17 set (Make - V-guard/ CG/ Kirloskar)

Supplying all labour materials, T&P for fitting and fixing of installation of tulu motor including cable, and MCB arrangement etc. complete as per the direction of EIC.